Welcome! Please Sign-In
Top Sellers
Stainless Tiller Bracket from WEST MARINE
Stainless Tiller Bracket from WEST MARINE
Use this tiller bracket to attach a tiller to the rudder head. Made from electropolished stainless steel, 9"L x 1. 5"W, with one 3/8" hole at the rudderhead end, and two 1/4" holes for through-bolting to the tiller. Tiller shim kits increase the width of the tiller to fit the exact rudder thickness.
Swim Platform Bracket, 72-84IN from AFI
Swim Platform Bracket, 72-84IN from AFI
A simple way to mount your swim platform. 304 stainless steel brackets, 1. 5"W flat bar stock for the underside of the platform and transom.
Gimabl Bracket for 10" Standard Yacht Lamp from WEEMS And PLATH
Gimabl Bracket for 10" Standard Yacht Lamp from WEEMS And PLATH
These brackets make yacht lamps a more practical lighting solution while underway or in anchorages susceptible to to waves and sway.
Rail Mount Anchor Bracket, Horizontal from WINDLINE
Rail Mount Anchor Bracket, Horizontal from WINDLINE
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).
Rail Mount Anchor Bracket, Vertical from WINDLINE
Rail Mount Anchor Bracket, Vertical from WINDLINE
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).
Black Rubber Roller & Bracket Assembly, 8" Keel, 5/8" Shaft from C E SMITH
Black Rubber Roller & Bracket Assembly, 8" Keel, 5/8" Shaft from C E SMITH
Pre-assembled for easy installation . Strong, hot-dipped galvanized brackets hold shock-absorbing, V-style tapered rollers to give proper keel support . Black rubber rollers available in 5 widths. Long-lasting TPR rollers available in 3 widths. 17/32" x 5" slots for vertical adjustment.
18-2 Gauge Flat Safety Wire, by the Spool from ANCOR MARINE
18-2 Gauge Flat Safety Wire, by the Spool from ANCOR MARINE
To reduce the chances of electrocution on board, we strongly recommend using Safety Wire in your DC system. The familiar red and black conductors are now red and yellow, to reduce the chance of incorrectly connecting the AC hot (black) with the DC ground (black). Wire Type: Safety . Construction: Tinned Copper . Conductors (Color and # of): One Red, One Yellow . Color of Exterior Insulation: White .
Swimstep Bracket, For 24IN from AFI
Swimstep Bracket, For 24IN from AFI
A simple way to mount your swim platform. 304 stainless steel brackets, 1. 5"W flat bar stock for the underside of the platform and transom.
12-2 Gauge Flat Safety Wire, by the Spool from ANCOR MARINE
12-2 Gauge Flat Safety Wire, by the Spool from ANCOR MARINE
To reduce the chances of electrocution on board, we strongly recommend using Safety Wire in your DC system. The familiar red and black conductors are now red and yellow, to reduce the chance of incorrectly connecting the AC hot (black) with the DC ground (black). Wire Type: Safety . Construction: Tinned Copper . Conductors (Color and # of): One Red, One Yellow . Color of Exterior Insulation: White .
14-2 Gauge Flat Safety Wire, by the Spool from ANCOR MARINE
14-2 Gauge Flat Safety Wire, by the Spool from ANCOR MARINE
To reduce the chances of electrocution on board, we strongly recommend using Safety Wire in your DC system. The familiar red and black conductors are now red and yellow, to reduce the chance of incorrectly connecting the AC hot (black) with the DC ground (black). Wire Type: Safety . Construction: Tinned Copper . Conductors (Color and # of): One Red, One Yellow . Color of Exterior Insulation: White .
16-2 Gauge Flat Safety Wire, by the Spool from ANCOR MARINE
16-2 Gauge Flat Safety Wire, by the Spool from ANCOR MARINE
To reduce the chances of electrocution on board, we strongly recommend using Safety Wire in your DC system. The familiar red and black conductors are now red and yellow, to reduce the chance of incorrectly connecting the AC hot (black) with the DC ground (black). Wire Type: Safety . Construction: Tinned Copper . Conductors (Color and # of): One Red, One Yellow . Color of Exterior Insulation: White .
Black Rubber Roller & Bracket Assembly, 5" Keel, 5/8" Shaft from C E SMITH
Black Rubber Roller & Bracket Assembly, 5" Keel, 5/8" Shaft from C E SMITH
Pre-assembled for easy installation . Strong, hot-dipped galvanized brackets hold shock-absorbing, V-style tapered rollers to give proper keel support . Black rubber rollers available in 5 widths. Long-lasting TPR rollers available in 3 widths. 17/32" x 5" slots for vertical adjustment.
Small Craft Safety Bag; #3118 from BOATMATES
Small Craft Safety Bag; #3118 from BOATMATES
Keep all your mandatory safety and emergency gear organized in this commercial-weight, ventilated bag. Holds four adult, and two children’s PFDs in main compartments, plus separate storage area in lid holds first-aid supplies, safety flares, distress flag, air horn, etc. Bag has heavy web carrying handles, nonskid feet on bottom, and grommet openings for drainage. Nylon, self-repairing zippers on bag and lid. D-rings on each end allow bag to be secured to deck on boat or dinghy. Model 3118.
Standard Safety Tether from WEST MARINE
Standard Safety Tether from WEST MARINE
New and improved tether fastens easily, won't let go Our new safety tether features high-strength nylon webbing with lock-stitched three-cord thread and nonmagnetic stainless-steel hardware. The new and improved asymmetrical snap hook at the boat end incorporates the latest technology, reducing the risk of accidental release while still remaining easy to open when desired. Snap Shackle at the chest end is for quick release from the harness under load. Material: 1" nylon webbing.
(C) Ring, Rail or Flat Mount from GARELICK
(C) Ring, Rail or Flat Mount from GARELICK
Mounting brackets for USCG-approved Ring and Horseshoe Buoys.

Safety Bracket

Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK Home -> Engine Systems -> Motor Mounts -> Motor Mounts->4-Stroke Auxiliary Outboard Brackets
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
Part No: 71090:01
Auxiliary Outboard Bracket, 15-1/2" Vertical Lift, 7.5hp-25hp HP Rating from GARELICK Home -> Engine Systems -> Motor Mounts -> Motor Mounts->4-Stroke Auxiliary Outboard Brackets
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
Part No: 71091:01
Extinguisher Bracket For 5lb. (smallest) extinguishers from KIDDE Home -> Safety -> Fire Extinguishers->Extinguisher Brackets
Plastic and aluminum construction.
Part No: 24530
Mounting Bracket for Halotron I, 11lb/15.5lb from KIDDE Home -> Safety -> Fire Extinguishers->Extinguisher Brackets
Plastic and aluminum construction.
Part No: 23131
Universal LowPro2™ Category II EPIRB Bracket from ACR ELECTRONICS Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival
Fits all ACR Satellite 406, Satellite2, GlobalFix, RapidFix and MagnumB Category II EPIRBs. Internal magnet deactivates EPIRB Water Sensor when in the bracket.
Part No: 9430
Extra USCG Bracket (Fits Mariners 5, 10, 110) from KIDDE Home -> Safety -> Fire Extinguishers->Mariner Dry Chemical Fire Extinguishers
Easy to operate—just pull the pin, aim nozzle at the base of the fire and squeeze the handle. Include a plastic USCG-approved bracket. Mariner 110 uses monoammonium phosphate dry chemical which is effective on all types of fires, but corrosive to metal and electronics. Compact model includes pressure gauge. Activation Method: Manual . Disposable or Rechargeable: Disposable . Extinguishing Agent: Sodium bicarbonate dry chemical; Mariner 110 uses monoammonium phosphate dry chemical .
Part No: 420118
Aluminum Ring Buoy Brackets from CAL-JUNE Home -> Safety -> Man Overboard Gear
Anodized aluminum brackets fit all life ring sizes. Require 1/8" fasteners. Sold in pairs. Made in U. S. A. Mfr.
Part No: 803
Mounting Bracket from ORION Home -> Safety -> Flares & Signaling Devices -> Flares->Orion Flare Kit Accessories
12-gauge converter allows 25mm launcher to fire 12-gauge meteors (not shown). Mounting bracket for mounting 12-gauge launcher or 25mm bulkhead canister.
Part No: 995
Bracket for PRO-10 TCM from KIDDE Home -> Safety -> Fire Extinguishers->Premium Metal Valve Refillable Fire Extinguishers
Easy to operate, rechargeable extinguishers. Feature integral gauges that indicate whether the extinguisher is ready for use. The B-I models include a metal, USCG-approved bracket. The B-II model requires the Rb-18 metal bracket which can be ordered separately.
Part No: 366242
Mounting Bracket, EM230 BR/EM230 Midi from AQUAMATE Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->EchoMax Radar Reflectors
Echomax Reflectors are constructed of a three stack array of laser cut aluminum enclosed in a polyethylene case. Their large amount of reflective material does not have the characteristic peaks and large nulls of the normal corner reflector due to the multiple corner stacked arrays and they produce a far higher average return than Luneberg lens reflectors. They can be mounted on a standing rig, halyard hoist or mast. The EM305 is a good choice for large work boats and commercial fishing boats.
Part No: EM230MB
Outboard Safety Cable from GARELICK Home -> Engine Systems -> Motor Mounts
Secure your motor to the boat with this strong, 700-lb. tensile strength cable. It's clad in clear vinyl so it won't mar your boat, motor or bracket. Heavy-duty, rust-resistant swivel snap.
Part No: 71030:01
(A) Ring: Holds Buoys to 3.3/4" Thick, Flat Mount from GARELICK Home -> Safety -> Man Overboard Gear->Buoy Mounting Brackets
Mounting brackets for USCG-approved Ring and Horseshoe Buoys.
Part No: S-0233P
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12