5/8" Stainless-Steel Sail Track Stop from SCHAEFER
Stainless-steel end stops protect your sails.

Marine Dry Lube from CRC MARINE
Superior dry lubrication for moving or stationary parts. Displaces moisture and inhibits corrosion. Fortified with PTFE to provide a micro-thin film that won’t attract dust or dirt. Dries in seconds. Will not stain sails or clothes. Great for mast track, genoa or traveler T-track, headsail grooves, hinges, zippers, headfoils, and sliders.

Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.

1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.

Horizontal Chrome/Brass Masthead Light, Boat Size to 12m (39'4"), 2-3/8"H x 7/8"W from PERKO
For powerboats and sailboats. Chrome-plated brass or chrome-plated zinc. Mounting Hardware: #4 FHMS Volts: 12V Draw: 0.

Capstan 1000 Rope Winch from POWERWINCH
Versatile system uses an easy to operate foot switch to retrieve anchors or fishing pots or provide power assistance on limited crew sailboats. Solid, 1-piece, machined capstan features aluminum housing with stainless steel internal shafts and hardware. Deck mounted design saves space for rope locker. Mounting template included. Pulling Power: 1000lbs. Speed Up: 40'/min. Boat size: to 55' . Rope Type: 3-strand nylon. Draw: 27A @12v. Measure 6 5/16"H x 8"W x 10 9/16"L.

Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
European style Series 170 side navigational lights are certified for use on powerboats and sailboats up to 20m (or 65. 6') with 12V electrical systems. Red or green lenses with 12V bulbs included. 2nm visibility range. Case Material: Chrome-plated brass tops with black plastic bases . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 97A . Replacement Bulb: Model 8646853 .

Vertical Sidelights, White from PERKO
For powerboats and sailboats less than 20m or 65. 6'. Plastic frames with ultrasonically welded lenses and gasketed plastic bases. 2nm visibility. Per pair, except bi-color. Case Material: Plastic . Case Dimensions: 3-1/2"L x 2-1/4"W x 13/16"H . Mounting Hardware: #8 FHMS (sold separately) . Volts: 12V . Draw: 0. 7A .

Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.

Tubing-Alu 7/8X20' from WEST MARINE
Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has . 049" wall thickness . Aluminum has . 058" wall thickness . Use 7/8" tubing for smaller powerboats . Use 1" tubing for sailboats and larger powerboats . Available in 6', 12' and 20' lengths .

G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.

6" Polished Aluminum Flip Up Dock Cleat from DOCK EDGE INC
These sleek, low-profile cleats fold down and out of the way when not in use. The smooth rounded surfaces are made of solid aluminum with a white polyester power coating. Predrilled for mounting with 3/8" carriage bolts (hardware sold seperately). .

Sail Tie, Ball End 16IN, Blue from STARBRITE
Securing your mainsail to the boom is simpler and quicker when you use sail lashes instead of conventional ties. Dual lengths of durable, UV-resistant polyester plastic cord have polyethylene ball ends with brass stops and damping rings. Color-coded balls.

4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.

Bullseye, 1-1/8" Nylon from RONSTAN
Great for minor direction changes in line. Also good for containing line hanging along booms. Nylon deadeyes are available with or without insert.