Rail Mount Anchor Bracket, Horizontal from WINDLINE
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).

Swim Platform Bracket, 72-84IN from AFI
A simple way to mount your swim platform. 304 stainless steel brackets, 1. 5"W flat bar stock for the underside of the platform and transom.

Downhaul Hook, 2 3/4IN L, 5/16Dia. from SEAFIT HARDWARE
Stainless steel hook with closed perpendicular eye.

Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .

(C) Ring, Rail or Flat Mount from GARELICK
Mounting brackets for USCG-approved Ring and Horseshoe Buoys.

Transom Adapter for Bracket from FULTON
Lets you remove your outboard bracket and outboard for security and less stress and fatigue on the transom while trailering. A locking device helps theft-proof motor and bracket. Heavy-duty marine-grade aluminum with stainless steel mounting bolts supplied. For Adjustable Brackets above (Models 380321 & 389866).

Ladder Storage Mounting Bracket from GARELICK
For storing ladder on side coaming or transom. Identical to brackets included with each ladder.

Teak Logbook Cover, Sailboat from WEEMS And PLATH
If you keep a log - and you should - there is no better way to cover it! This Teak Log Cover is a necessity for every captain whose love of his vessel is clearly evident. These attractive, handmade teak covers with a high gloss lacquer finish, provide complete protection for your log book. Feature a solid brass engravable plate with Sailboat motif, including ample room for engraving the vessel name, captain and hailing port. Weems & Plath®. Log Books sold separately, see below.

SaniPottie® Portable Head Hold-Down Brackets from SEALAND
Hold-down brackets keep SaniPottie safely in place.

Mounting Bracket for Halotron I, 11lb/15.5lb from KIDDE
Plastic and aluminum construction.

Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.

Tubing-Alu 7/8X20' from WEST MARINE
Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has . 049" wall thickness . Aluminum has . 058" wall thickness . Use 7/8" tubing for smaller powerboats . Use 1" tubing for sailboats and larger powerboats . Available in 6', 12' and 20' lengths .

G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.

4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.

Tubing SS 1''X20' from WEST MARINE
Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has . 049" wall thickness . Aluminum has . 058" wall thickness . Use 7/8" tubing for smaller powerboats . Use 1" tubing for sailboats and larger powerboats . Available in 6', 12' and 20' lengths .