Single with Cushions 20 3/4 x 24 1/8 x 21 3/4 from TRACY INTERNATIONAL
This classy and comfortable captain's chair is right at home at the center console or on the flybridge of your vessel. Made of rugged, UV-stabilized polyethylene for years of service, it features a ladder back design with metal bars that extend to the top of the chair back for maximum support and flexibility. The single chair includes extra-thick tufted cushions and armrests on anodized aluminum supports. The double wide chairs are offered with or without armrests and cushions.

900 Series Hatch without Screen & Trim Ring, 16-7/8" x 16-7/8" Cutout Size, Black from BOMAR
Standard equipment on many boats, these low-profile hatches are constructed with molded polycarbonate frames, tough smoked acrylic and passivated stainless hardware. Hatch opens wide or locks in vent position. Supplied completely assembled with screen and trim ring included. Material: Molded polycarbonate frame, smoked-acrylic lens . Latches: Adjustable latches with locked vent position . Hinges: Heavy-duty hinges with stainless-steel supports . Included Accessories: Screen and trim ring .

Bimini Support Poles, Adjustable from TAYLOR
Keep your Bimini up off the gunwales when not in use. A pair of support poles replaces aft tensioning straps. 377820 Adjusts from 28''-48". 271380 is 40" fixed .

900 Series Hatch with Screen & Trim Ring, 18x13' Cutout Size, Black from BOMAR
Standard equipment on many boats, these low-profile hatches are constructed with molded polycarbonate frames, tough smoked acrylic and passivated stainless hardware. Hatch opens wide or locks in vent position. Supplied completely assembled with screen and trim ring included. Material: Molded polycarbonate frame, smoked-acrylic lens . Latches: Adjustable latches with locked vent position . Hinges: Heavy-duty hinges with stainless-steel supports . Included Accessories: Screen and trim ring .

Lid Support Spring, 5/8” x 12”L from T-H MARINE
Now it's easy and inexpensive to keep hatches, cooler lids, and dock boxes open. Stainless steel springs move to support position when opened, holding up lid, hatch or cover. Bend the spring to release support and close. . Molded black nylon ends for mounting. Stainless steel retaining cable in center of spring provides added strength.

24" x 48" x 12" Float Drum, 450lb. Flotation from TAYLOR
Constructed from a seamless polyethylene shell filled with low-density EPS foam. The shell is infused with UV inhibitors and has a minimum wall thickness of 0. 15". Unaffected by saltwater, gasoline, oil and most chemicals. Flat top has a flange with eight 1/2" holes for fasteners. Freeboard depends on how heavily the float is loaded—typically, floats are submerged about 4" on an unloaded dock.

Access Hatch, 7-1/8" x 11-1/8" Hatch Opening, 10-1/4" x 14-1/16" Flange OD from BOMAR
Low-profile hatches are great for floor mounting. Made of high-impact, UV stabilized polypropylene. Smooth-textured lid has support bars for added strength and screws are hidden from view. Double gasket system for a watertight seal. Easy opening, easy closing slam latch. White. Type: Access hatch. Material: High-impact UV-stabilized polypropylene . Latches: Non-locking slam latch . Hinges: 180° non-locking hinges. Installation Hardware Required: #10 SS Pan Head (sold separately) .

Access Hatch, 9-13/16" x 12" Hatch Opening, 12-15/16" x 14-15/16" Flange OD from BOMAR
Low-profile hatches are great for floor mounting. Made of high-impact, UV stabilized polypropylene. Smooth-textured lid has support bars for added strength and screws are hidden from view. Double gasket system for a watertight seal. Easy opening, easy closing slam latch. White. Type: Access hatch. Material: High-impact UV-stabilized polypropylene . Latches: Non-locking slam latch . Hinges: 180° non-locking hinges. Installation Hardware Required: #10 SS Pan Head (sold separately) .

900 Series Hatch with Screen & Trim Ring, 19.75" x 19.75" Cutout Size, Black from BOMAR
Standard equipment on many boats, these low-profile hatches are constructed with molded polycarbonate frames, tough smoked acrylic and passivated stainless hardware. Hatch opens wide or locks in vent position. Supplied completely assembled with screen and trim ring included. Material: Molded polycarbonate frame, smoked-acrylic lens . Latches: Adjustable latches with locked vent position . Hinges: Heavy-duty hinges with stainless-steel supports . Included Accessories: Screen and trim ring .

Access Hatch, 10-5/16" x 27-5/16" Hatch Opening, 13-7/16" x 30-1/4" Flange OD from BOMAR
Low-profile hatches are great for floor mounting. Made of high-impact, UV stabilized polypropylene. Smooth-textured lid has support bars for added strength and screws are hidden from view. Double gasket system for a watertight seal. Easy opening, easy closing slam latch. White. Type: Access hatch. Material: High-impact UV-stabilized polypropylene . Latches: Non-locking slam latch . Hinges: 180° non-locking hinges. Installation Hardware Required: #10 SS Pan Head (sold separately) .

Access Hatch, 11-1/16" x 20-1/16" Hatch Opening, 14-3/16" x 23" Flange OD from BOMAR
Low-profile hatches are great for floor mounting. Made of high-impact, UV stabilized polypropylene. Smooth-textured lid has support bars for added strength and screws are hidden from view. Double gasket system for a watertight seal. Easy opening, easy closing slam latch. White. Type: Access hatch. Material: High-impact UV-stabilized polypropylene . Latches: Non-locking slam latch . Hinges: 180° non-locking hinges. Installation Hardware Required: #10 SS Pan Head (sold separately) .

900 Series Hatch with Screen & Trim Ring, 9-1/2" x 9-1/2" Cutout Size, Black from BOMAR
Standard equipment on many boats, these low-profile hatches are constructed with molded polycarbonate frames, tough smoked acrylic and passivated stainless hardware. Hatch opens wide or locks in vent position. Supplied completely assembled with screen and trim ring included. Material: Molded polycarbonate frame, smoked-acrylic lens . Latches: Adjustable latches with locked vent position . Hinges: Heavy-duty hinges with stainless-steel supports . Included Accessories: Screen and trim ring .

24" x 48" x 16" Float Drum, 600lb. Flotation from TAYLOR
Constructed from a seamless polyethylene shell filled with low-density EPS foam. The shell is infused with UV inhibitors and has a minimum wall thickness of 0. 15". Unaffected by saltwater, gasoline, oil and most chemicals. Flat top has a flange with eight 1/2" holes for fasteners. Freeboard depends on how heavily the float is loaded—typically, floats are submerged about 4" on an unloaded dock.

Lid Support Spring, 7/16” x 8 1/2”L from T-H MARINE
Now it's easy and inexpensive to keep hatches, cooler lids, and dock boxes open. Stainless steel springs move to support position when opened, holding up lid, hatch or cover. Bend the spring to release support and close. . Molded black nylon ends for mounting. Stainless steel retaining cable in center of spring provides added strength.

Windshield Support Bar, 14" from TAYLOR
Top-quality support bars are original equipment on many walk-thru windshields. Anodized aluminum tubing with nylon fittings, which pivot in almost any direction for easy installation.