Welcome! Please Sign-In
Top Sellers
SeaStar Filler Kit from TELEFLEX
SeaStar Filler Kit from TELEFLEX
SeaStar hydraulic steering systems require the use of a special high-quality hydraulic fluid meeting MIL SPEC H-5606 C.
Rail Mount Outboard Bracket, 10 1/2" from WEST MARINE
Rail Mount Outboard Bracket, 10 1/2" from WEST MARINE
Keep your small outboard safe and upright on the stern rail, rather than stowed in a locker where gasoline from the tank could cause hazardous fumes to collect, or spill and ruin stored goods. Two-piece mounting blocks clamp around a 1'' O. D. rail ''T''. Holds outboards up to 8 hp. Each comes complete with stainless mounting bolts. UV-stabilized polypropylene.
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
BayStar Helm Seal Kits from TELEFLEX
BayStar Helm Seal Kits from TELEFLEX
Replacement front seal kits for both front and rear mount helms. HS5147 fits BayStar front mount and SportTilt helms . Contains 3 screws, shaft seal and o-ring seal.
Steering Wheel, Black w/ Burlwood Inserts from SCHMITT MARINE STEER
Steering Wheel, Black w/ Burlwood Inserts from SCHMITT MARINE STEER
Classic Italian styling at an affordable price. Our Folletto wheels feature modern styling that will enhance the look of any power boat. These wheels feature aluminum spoke with polyurethane grips. The 3/4" tapered hub fits most steering systems. Black aluminum spoke. Black polyurethane grip. Burlwood inserts. 13-3/4" Diameter.
Repl. Cylinder - Repl. Hynautic Model K2 from TELEFLEX
Repl. Cylinder - Repl. Hynautic Model K2 from TELEFLEX
Hydraulic Cylinders -- the same quality steering components that comprise the many Hynautic systems may also be ordered independently for both new or retrofit applications.
SmartPilot Corepacks from RAYMARINE INC.
SmartPilot Corepacks from RAYMARINE INC.
The central nervous system of every SmartPilot system, Raymarine corepacks are comprised of a course computer,patented fluxgate electronic compass and rudder reference unit. In order to select the right SmartPilot corepack for your vessel you must first determine which autopilot drive unit is right for your steering system. Each corepack contains a SmartPilot course computer in either a standard configuration or a “G” version. T400 Corepacks are now called S3 Corepacks. Fluxgate compass - 3.
84”L Fiberglass Bow from TAYLOR
84”L Fiberglass Bow from TAYLOR
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.
SeaStar Helm Seal Kit from TELEFLEX
SeaStar Helm Seal Kit from TELEFLEX
Replacement shaft seal kit HS5176 fits various post-1990 SeaStar 1. 4, 1. 7 (I), 2. 0, 2. 4 (II), SeaStar Pro and SeaStar helms.
Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.
Big-T Rotary Helm from TELEFLEX
Big-T Rotary Helm from TELEFLEX
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
Outboard Lock - Merc/Mariner (40hp), 1/2" x 20 thread from MCGARD
Outboard Lock - Merc/Mariner (40hp), 1/2" x 20 thread from MCGARD
Help make your outboard less attractive to thieves, and also keep it from vibrating loose while running. The vinyl-clad steel tube slides over the mounting screws and is secured with a hardened brass padlock. Padlock is recessed inside the tube to protect against cutting. Comes with two keys. *Fits: OMC 6-30hp, Merc/Mariner 8-25hp, Yamaha 9. 9-40hp, Suzuki 8-13hp.
Twin Straight Handle Control, Chrome from TELEFLEX
Twin Straight Handle Control, Chrome from TELEFLEX
Stylish low profile flush mount design available in several function and style options. For single or dual station applications with single or twin engines. Single function (each lever controls shift or throttle). Suits 33C type cables.
3300 Pivot Kit, Brass from TELEFLEX
3300 Pivot Kit, Brass from TELEFLEX
3300 Pivot Kit, Brass.
Power Trim & Steering Fluid, 32oz. from QUICKSILVER
Power Trim & Steering Fluid, 32oz. from QUICKSILVER
A universal hydraulic fluid designed to mix with all hydraulic fluids, protect seals and hoses, and prevent foaming, oxidation and corrosion.

SeaStar Pro Front-Mount Outboard Hydraulic Steering System, Teleflex Seastar Pro Front-Mount Outboard Hydraulic Steering System

SeaStar PRO Front-Mount Outboard Hydraulic Steering System from TELEFLEX Home -> Engine Systems -> Steering Systems->SeaStar Pro Front-Mount Outboard Hydraulic Steering System
SeaStar PRO has steered the Bass Masters Classic® since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. 0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout.
Part No: HK7400A
24' Kevlar-Reinforced SeaStar PRO Steering Hose Kit (2 per kit) from TELEFLEX Home -> Engine Systems -> Steering Systems->SeaStar Pro Front-Mount Outboard Hydraulic Steering System
SeaStar PRO has steered the Bass Masters Classic® since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. 0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout.
Part No: HO5724
16' Kevlar-Reinforced SeaStar PRO Steering Hose Kit (2 per kit) from TELEFLEX Home -> Engine Systems -> Steering Systems->SeaStar Pro Front-Mount Outboard Hydraulic Steering System
SeaStar PRO has steered the Bass Masters Classic® since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. 0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout.
Part No: HO5716
14' Kevlar-Reinforced SeaStar PRO Steering Hose Kit (2 per kit) from TELEFLEX Home -> Engine Systems -> Steering Systems->SeaStar Pro Front-Mount Outboard Hydraulic Steering System
SeaStar PRO has steered the Bass Masters Classic® since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. 0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout.
Part No: HO5714
18' Kevlar-Reinforced SeaStar PRO Steering Hose Kit (2 per kit) from TELEFLEX Home -> Engine Systems -> Steering Systems->SeaStar Pro Front-Mount Outboard Hydraulic Steering System
SeaStar PRO has steered the Bass Masters Classic® since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. 0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout.
Part No: HO5718
20' Kevlar-Reinforced SeaStar PRO Steering Hose Kit (2 per kit) from TELEFLEX Home -> Engine Systems -> Steering Systems -> Hydraulic Steering->SeaStar Pro Front-Mount Outboard Hydraulic Steering System
SeaStar PRO has steered the Bass Masters Classic® since 1994. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. 0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Compact helm has a 4 7/16" footprint and requires only a 3" cutout.
Part No: HO5720
22' Kevlar-Reinforced SeaStar PRO Steering Hose Kit (2 per kit) from TELEFLEX Home -> Engine Systems -> Steering Systems->SeaStar Pro Front-Mount Outboard Hydraulic Steering System
Recommended for single non-power-assisted outboards up to 300hp. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. The kit includes a 2. 0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Match the helm with Kevlar reinforced HO57XX hoses.
Part No: HO5722
Outboard Front Mount Cylinder - HC5358 from TELEFLEX Home -> Engine Systems -> Steering Systems -> Hydraulic Steering
Pivoting replacement hydraulic cylinder for SeaStar and SeaStar Pro steering systems.
Part No: HC5358
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11