Top Sellers
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.
|
|
|
Marine Mildew Block from 3M PRODUCTS
Helps keep your boat fresh and looking like newUnique non-toxic formula provides long-lasting protection to help keep your boat fresh and looking like new. Works on virtually all surfaces above the waterline, including sails, seat cushions, carpeting, canvas, deck furniture, rub rails, showers, boat covers and vinyl. 16. 9oz. 16. 9oz.
|
84”L Fiberglass Bow from TAYLOR
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.
|
Canvas Cleaner from MEGUIARS
Quickly clean your canvass, with no need to rinseEffectively removes dirt, stains and mildew to restore canvas to its original look and feel. Simply spray and wipe off. No need for water to rinse away. Perfect for boat covers and bimini tops. 16oz. trigger bottle. 16oz.
|
|
|
Fleece Fender Cover, Fits Fenders 10" x 26", Black from TAYLOR
Perfect for use with Big B and other center-tube style fenders, these 100% polyester fleece covers will provide posh protection for your boat! Made of rugged, 12-ounce Blizzard fleece, they are UV- light and tear-resistant. The draw string hem enables adjustment for a snug fit and also permits removal for washing.
|
Back-to-Back Lounge Chair Seat Cover, 22"H x 50"W x 22"D from TAYLOR
Breathable rip/stop polyester fabric plus air vents provide optimum protection and ventilation for your seats, especially in hot and humid climates. Polyurethane coating on the inside prevents color transfer or bleed-through . Comes with drawstring hem . Available for most popular seat styles .
|
Snap-On Cable Cover, 1/4" Wire Dia. from DAVIS INSTRUMENTS
White vinyl cable covers in 6' lengths. Tubes split down length and install in seconds.
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
Fiberglass Boat Cleaner 920 1/2 Gallon from COLLINITE
Removes rust, exhaust, oil, grease, and oxidation stains from fiberglass. Restores the original color quickly without hard rubbing or buffing, leaves a chemically clean surface to which waxes can bond. Use with fiberglass boat wax or heavy-duty paste Fleetwax . Made in U. S. A.
|
Orpine Boat Soap, Quart from ORPIN
Fresh pine scent!Replaces musty mildew odors with a pleasant fresh pine scent. Just one ounce in three gallons of fresh or saltwater will clean a 45'L boat. Biodegradable. Biodegradable.
|
|
Seating and Boat Covers ATTWOOD
|
|
Home -> Seating & Covers -> Seating->PROform Folding Boat Seat
PROForm Seat Series PROForm seating is rugged and ergonomically matched to the natural S-curve of the human spine. Provides the perfect support for the active boater and fisherman. It's the sure-fire choice because it accommodates the dimensions of 95% of the population. And all of that makes it a comfortable choice for your boat. Drain hole helps it stay dry . Backrest latch eliminates the need for straps and snaps . Upholstered, padded seat and backrest add cushioned comfort .
Part No: 7012-101-4
|
|
|
|
|
Home -> Seating & Covers -> Seating->PROform Folding Boat Seat
PROForm Seat Series PROForm seating is rugged and ergonomically matched to the natural S-curve of the human spine. Provides the perfect support for the active boater and fisherman. It's the sure-fire choice because it accommodates the dimensions of 95% of the population. And all of that makes it a comfortable choice for your boat. Drain hole helps it stay dry . Backrest latch eliminates the need for straps and snaps . Upholstered, padded seat and backrest add cushioned comfort .
Part No: 7012-706-4
|
|
|
|
|
Home -> Seating & Covers -> Seating->PROform Folding Boat Seat
PROForm Seat Series PROForm seating is rugged and ergonomically matched to the natural S-curve of the human spine. Provides the perfect support for the active boater and fisherman. It's the sure-fire choice because it accommodates the dimensions of 95% of the population. And all of that makes it a comfortable choice for your boat. Drain hole helps it stay dry . Backrest latch eliminates the need for straps and snaps . Upholstered, padded seat and backrest add cushioned comfort .
Part No: 7012-004-4
|
|
|
|
Home -> Seating & Covers -> Seating->Full Upholstered Avenir Sport Seat
Full Upholstered Avenir Sport Seat Attractively patterned Avenir Sport SAS spring suspension seats are trimmed out with backrest upholstered onsert, for deep-tuck styling, and molded polyurethane foam with stapled-in-place upholstery. All upholstery is marine-grade vinyl. Each seat includes corrosion-resistant T-nuts for attachment to seat pedestals.
Part No: 98437OW-2
|
|
|
|
|
Home -> Seating & Covers -> Seating->Full Upholstered Avenir Sport Seat
Full Upholstered Avenir Sport Seat Attractively patterned Avenir Sport SAS spring suspension seats are trimmed out with backrest upholstered onsert, for deep-tuck styling, and molded polyurethane foam with stapled-in-place upholstery. All upholstery is marine-grade vinyl. Each seat includes corrosion-resistant T-nuts for attachment to seat pedestals.
Part No: 98438YE-2
|
|
|
|
Home -> Seating & Covers -> Seating -> Chairs & Seats->Aergo 240 Seating System
A recessed arm area allows user to swing their leg over the side of the seat when turning to look behind the boat and the flip-up bolster allows additional height when trying to get the boat on plane. Shock Absorption Aergo also possesses a feature that you expect in Attwood premium seating, the 4-G Mesh SAS Shock Absorbing System that absorbs up to 4-G's of shock. On Attwood seats, the right amount of sculpted foam enhances the comfort and support already designed into the ergonomic contour.
Part No: 98966BK-2
|
|
|
|
|
Home -> Seating & Covers -> Seating -> Chairs & Seats->Aergo 240 Seating System
A recessed arm area allows user to swing their leg over the side of the seat when turning to look behind the boat and the flip-up bolster allows additional height when trying to get the boat on plane. Shock Absorption Aergo also possesses a feature that you expect in Attwood premium seating, the 4-G Mesh SAS Shock Absorbing System that absorbs up to 4-G's of shock. On Attwood seats, the right amount of sculpted foam enhances the comfort and support already designed into the ergonomic contour.
Part No: 98966GY-2
|
|
|
|
|
Home -> Seating & Covers -> Seating -> Chairs & Seats->Aergo 240 Seating System
A recessed arm area allows user to swing their leg over the side of the seat when turning to look behind the boat and the flip-up bolster allows additional height when trying to get the boat on plane. Shock Absorption Aergo also possesses a feature that you expect in Attwood premium seating, the 4-G Mesh SAS Shock Absorbing System that absorbs up to 4-G's of shock. On Attwood seats, the right amount of sculpted foam enhances the comfort and support already designed into the ergonomic contour.
Part No: 98967SM-2
|
|
|
|
|
Home -> Seating & Covers -> Seating -> Chairs & Seats->Aergo 240 Seating System
A recessed arm area allows user to swing their leg over the side of the seat when turning to look behind the boat and the flip-up bolster allows additional height when trying to get the boat on plane. Shock Absorption Aergo also possesses a feature that you expect in Attwood premium seating, the 4-G Mesh SAS Shock Absorbing System that absorbs up to 4-G's of shock. On Attwood seats, the right amount of sculpted foam enhances the comfort and support already designed into the ergonomic contour.
Part No: 98967BW-2
|
|
|
|
|
Home -> Seating & Covers -> Seating -> Chairs & Seats->Aergo 240 Seating System
A recessed arm area allows user to swing their leg over the side of the seat when turning to look behind the boat and the flip-up bolster allows additional height when trying to get the boat on plane. Shock Absorption Aergo also possesses a feature that you expect in Attwood premium seating, the 4-G Mesh SAS Shock Absorbing System that absorbs up to 4-G's of shock. On Attwood seats, the right amount of sculpted foam enhances the comfort and support already designed into the ergonomic contour.
Part No: 98967TN-2
|
|
|
|
|
Home -> Seating & Covers -> Seating->Aergo 240 Seating System
A recessed arm area allows user to swing their leg over the side of the seat when turning to look behind the boat and the flip-up bolster allows additional height when trying to get the boat on plane. Shock Absorption Aergo also possesses a feature that you expect in Attwood premium seating, the 4-G Mesh SAS Shock Absorbing System that absorbs up to 4-G's of shock. On Attwood seats, the right amount of sculpted foam enhances the comfort and support already designed into the ergonomic contour.
Part No: 98966RD-2
|
|
|
|
|
Home -> Seating & Covers -> Seating -> Chairs & Seats->Aergo 240 Seating System
A recessed arm area allows user to swing their leg over the side of the seat when turning to look behind the boat and the flip-up bolster allows additional height when trying to get the boat on plane. Shock Absorption Aergo also possesses a feature that you expect in Attwood premium seating, the 4-G Mesh SAS Shock Absorbing System that absorbs up to 4-G's of shock. On Attwood seats, the right amount of sculpted foam enhances the comfort and support already designed into the ergonomic contour.
Part No: 98966BG-2
|
|
|
