Windshield Screw Cover Foam, 5/8"H x 1-1/4"W x 8'L from TACO PRODUCTS
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.

Windshield Screw Cover Foam, 1/4"H x 3/4"W x 8'L from TACO PRODUCTS
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.

Stainless-Steel Rub Rail, End, 1"H x 12"L; Requires #8 Screws from TACO PRODUCTS
Fits a wide variety of vinyl profiles Hollow back (marine grade type 304) has concave back to fit rigid vinyl rub rails and provide added protection and chrome-like accent around entire boat. Most widely used stainless-steel inserts fit the largest variety of vinyl profiles on the market. Solid back stainless-steel rub rail provides premium heavy-duty protection and a polished finish for your boat.

Stainless-Steel Rub Strake, 1"W x 24"L from TACO PRODUCTS
Polished stainless steel guards protect lines against chafe from cap rails, gunwales, etc. Material: Marine-grade stainless steel .

Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.

Rubrail Insert - for Style #6, Model 341100 from TACO PRODUCTS
Rubber inserts add cushioning to your aluminum rubrails. . These fit styles #5, #6 and #7. Rub rails and inserts sold separately. .

Magnetic Clasp, 40#, 1 1/4" x 1 1/8" x 1 1/4" from TACO PRODUCTS
Stainless Steel Magnetic Clasps for 3/4" thick surfaces.

Brushed Aluminum 4-Rod Rack from TACO PRODUCTS
Stylish, brushed aluminum rod storage racks feature slotted rod holders to lock in reels for safe, secure transport. Each holder is 12" long, with a 1. 9" dia.

Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.

T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.

T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.

Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.

Boat Guard Self Supporting Cover - 21'-23' Cuddy from TAYLOR
.

Marine Mildew Block from 3M PRODUCTS
Helps keep your boat fresh and looking like newUnique non-toxic formula provides long-lasting protection to help keep your boat fresh and looking like new. Works on virtually all surfaces above the waterline, including sails, seat cushions, carpeting, canvas, deck furniture, rub rails, showers, boat covers and vinyl. 16. 9oz. 16. 9oz.

Boat Vent II from TAYLOR
The newest in boat cover venting and support Don't let your interior suffer from mold and mildew damage. The patented Boat Vent II installs quickly and easily, with no screws or fasteners. The venting area provides for greater volume of exhaust air while closing the top to bottom gap - keeping water out!. The Boat Vent II is manufactured from a superior grade polycarbonate blend material for strength and UV resistance and will accommodate either 3/4" or 7/8" support poles.