Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.

Low-Permeation Fuel Hose, 1/2" ID, 250' Max. Length from SHIELDS RUBBER
Special design NBR tube with an embedded plastic barrier layer limits permeation. The design of this hose provides easy coupling insertion and the NBR/PVC cover is weather and UV resistant. The hose is also polyester reinforced and fire-resistant. Fuel Type: Fuel feed (gasoline up to 85% ethanol blended fuels/diesel/bio-diesel all blends) . Approvals: SAE J1527 Type A1-15 and ISO 7840 Type A1 . Construction: Reinforced with high strength synthetics to resist gasoline/alcohol permeation .

Marine Silicone Sealant, Clear, 10oz. Tube from WEST MARINE
Use wherever a flexible, removable seal is required A specially-formulated marine silicone that won’t sag, shrink or turn yellow. Can be used above and below the waterline wherever a flexible, removable seal is required. Excellent for bedding deck fittings and hardware that you may want to remove at some time. Also good for insulating between dissimilar metals to prevent galvanic corrosion. Formulation: One-part silicone sealant . Bonds to non-oily woods, metal, fiberglass, glass, plastics .

Series 40 Ratchet Block, Single/Cleat, 385lb. SWL, 3.4oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. " The newest addition to Ronstan’s Orbit range of super lightweight, fiber-reinforced blocks. Ideal for sheet applications on dinghies up to 16' and control line applications for small keel boats. There are two styles of Series 40 ratchet blocks. Many of the top Grand Prix Laser sailors are switching to Orbit blocks.

PVC with Polyurethane Mesh Rope Bag, 11-13/16"W x 16-11/16"H x 8-11/16"L from RONSTAN
Ronstan rope bags can be removed and stored inside the boat when not in use; all that remains in sight is the soft white plush side of the loop attachment panel—and no sharp hooks! RF3700 Series Acrylic Canvas Bags Acrylic rope bags have a classic navy style. They are lightweight, water resistant and will retain shape. Made of white, water-repellent PVC with black water-draining polyurethane mesh, these rope bags are extremely durable. Technical features include carbon tubes for easy opening.

1/4" Sta-Set X Polyester Double Braid, 2,700lb. Breaking Strength from NEW ENGLAND ROPES
Patented all-polyester braid with parallel core construction and a filament/spun cover for improved handling and greater abrasion resistance. One third less stretch than Sta-Set at only a small price premium. In many applications, Sta-Set X can be used in lieu of expensive racing braids, especially when sized conservatively. Identified by two fine red tracers in the cover forming the characteristic “X”. Best Use: Cruising boat halyards, spinnaker sheets, guys . Stretch: 1.

225 Series, 10 Micron Spin-On Replacement Element from RACOR-PARKER FILTRAT
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.

Tubing-Alu 7/8X20' from WEST MARINE
Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has . 049" wall thickness . Aluminum has . 058" wall thickness . Use 7/8" tubing for smaller powerboats . Use 1" tubing for sailboats and larger powerboats . Available in 6', 12' and 20' lengths .

300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.

Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.

Braided Polyester Cord, by the Foot from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Sold by the foot. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .

50' Braided Polyester Cord from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Length: 50'. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .

PVC Race Mark, Round, Orange, 52"H from WEST MARINE
PVC race marks are portable and towable, yet store compactly when not in use.

Transom Drain Tube & Plug from MOELLER
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.

Bowl Drain Valve, 900/1000 Series from RACOR-PARKER FILTRAT
Parts for 500, 900 and 1000 Turbine Series Filters.