Power Tilt & Trim Fluid - Quart from WEST MARINE
Formulated to provide viscosity and lubricity necessary for proper pump performance and seal life. Combats high operating pressures and resists rust.

Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.

For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.

Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .

Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.

CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.

Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.

Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .

Series 315 Outboard Fuel Hose - 3/8"ID from SHIELDS RUBBER
Premium-quality fuel hose designed for outboard feed and vent lines. Remains flexible at low temperatures and resists UV sunlight. Silverado 2000 complies with SAE J1527 Type B2 specifications. Should not be used in applications requiring the use of Type B1 fuel feed line.

Outboard Lock - Merc/Mariner (40hp), 1/2" x 20 thread from MCGARD
Help make your outboard less attractive to thieves, and also keep it from vibrating loose while running. The vinyl-clad steel tube slides over the mounting screws and is secured with a hardened brass padlock. Padlock is recessed inside the tube to protect against cutting. Comes with two keys. *Fits: OMC 6-30hp, Merc/Mariner 8-25hp, Yamaha 9. 9-40hp, Suzuki 8-13hp.

Rail Mount Outboard Bracket, 10 1/2" from WEST MARINE
Keep your small outboard safe and upright on the stern rail, rather than stowed in a locker where gasoline from the tank could cause hazardous fumes to collect, or spill and ruin stored goods. Two-piece mounting blocks clamp around a 1'' O. D. rail ''T''. Holds outboards up to 8 hp. Each comes complete with stainless mounting bolts. UV-stabilized polypropylene.

Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.

Outboard Oil - SAE 10W-40 from WEST MARINE
With a higher number of performance-boosting additives than automotive oil, this synthetic blend meets and exceeds the needs of high-performance outboards. It's special formula protects outboards from friction damage and engine wear. Outstanding viscosity at low temperatures. Greater detergency. Resists engine build up. Exceeds all 4-stroke outboard requirements.

13-1/4" x 17" Propeller for Evinrude/Johnson Outboards from MERCURY MARINE
Three-blade aluminum one-piece propellers for Evinrude/Johnson outboards. 8–15hp, 9. 9–15hp 2–stroke 1974 & up, 8/9. 9/15hp 4–stroke 1995 & up: Model 5026695. 20–35hp, 20hp 1984–97, 25/30hp 1984 & up, 35hp 1976 & up: Models 4744207, 8640492. 40–75hp, 40hp 1984 & up, 65hp 1980–85, 48hp 1987–96, 75hp 1975–85, 50hp 1975 & up, Sprint 1986–92, 55hp 1976–79, Formula E 1986–92, 60hp 1980–85: Models 8640484, 4744173, 4744181. 45–75hp large gearcase, OMC Cobra 2. 3–2.

12-1/4" x 15" Propeller for Evinrude/Johnson Outboards from MERCURY MARINE
Three-blade aluminum one-piece propellers for Evinrude/Johnson outboards. 8–15hp, 9. 9–15hp 2–stroke 1974 & up, 8/9. 9/15hp 4–stroke 1995 & up: Model 5026695. 20–35hp, 20hp 1984–97, 25/30hp 1984 & up, 35hp 1976 & up: Models 4744207, 8640492. 40–75hp, 40hp 1984 & up, 65hp 1980–85, 48hp 1987–96, 75hp 1975–85, 50hp 1975 & up, Sprint 1986–92, 55hp 1976–79, Formula E 1986–92, 60hp 1980–85: Models 8640484, 4744173, 4744181. 45–75hp large gearcase, OMC Cobra 2. 3–2.