Top Sellers
Non-Skid Deck Cleaner from 3M PRODUCTS
Cleans non-skid surfacesDesigned to clean hard-to-reach ground-in dirt and stains on non-skid surfaces. Safe for use on fiberglass, metal and painted surfaces. One Liter (34oz. ) One liter (34oz.
|
Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Haul and relaunch without loss of performance The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Can be applied over most paints in good condition. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). Type: Copolymer . 2% Cuprous Oxide . Additives: None .
|
Scotch General Painting Masking Tape #2050 - 2" from 3M PRODUCTS
Use in a wide range of painting applicationsGeneral-purpose. Not for critical or extended outdoor use. Recommended Usage: General purpose masking or binding tape; adheres to previously painted or varnished surfaces . Material: Crepe paper with rubber resin adhesive . Removal Time: Three days .
|
Inflatable Boat Antifouling Paint from PETTIT
Water-based, multi-season ablative antifouling paint. For hard- or soft-bottom inflatables. Cleans up with water. Black. Quart. Type: Copolymer Ablative. Recommended Usage: PVC or Hypalon; trailered boats. Biocide: CuOx 41%. Additives: No. Compatibility: With all other antifouling paints in good condition except VC-17. Number of Coats Recommended: Two.
|
Non-Skid Tape, Black, 2" x 15' from SEAFIT
Use this tape and step with confidenceChoose self-adhesive tape or pads for docks, decks, steps and boat ramps.
|
Reflective Paint from RUST-OLEUM
Reflects spotlights and headlamps for increased night visibility and safety. Use on a variety of surfaces, including metal, wood, fiberglass, plastic and more. 10oz.
|
Preval Complete Sprayer Package from PRECISION VALVE
Here's an easy-to-use spraying systemEliminates the need to match color swatches on hard-to-find spray cans. Allows you to spray your own paint—and virtually any other liquid. Perfect for small jobs that a brush or roller can't handle. Holds 16oz. of paint. 16oz.
|
VC-Offshore - Baltoplate Gray, Gallon from INTERLUX
Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon® yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints.
|
Phantom Black Spray Paint from MERCURY MARINE
For all Mercury outboards and MCM/MIE engines and drives.
|
Engine Spray Paint -Mercury Phantom Black (1960-Pres.) from MOELLER
Durable, heat- and solvent-resistant acrylic lacquers formulated for use on all outboard and inboard engines, stern drive and lower unit applications. They are color-matched to original OEM colors and are a great way to protect your engine and make it look like new. 12oz.
|
Engine Spray Paint - Johnson/Evinrude, Light Blue Metallic (1978-87) from MOELLER
Durable, heat- and solvent-resistant acrylic lacquers formulated for use on all outboard and inboard engines, stern drive and lower unit applications. They are color-matched to original OEM colors and are a great way to protect your engine and make it look like new. 12oz.
|
Engine Spray Paint - Yamaha Metallic Blue Silver (1985-90) from MOELLER
Durable, heat- and solvent-resistant acrylic lacquers formulated for use on all outboard and inboard engines, stern drive and lower unit applications. They are color-matched to original OEM colors and are a great way to protect your engine and make it look like new. 12oz.
|
Marine Color Vision Engine Spray Paint - Chrysler Blue, 12oz. from MOELLER
Color matched to your engine’s original color Marine Color Vision is formulated for the marine environment. For use on all outboard & inboard engines, stern drive and lower unit applications. Quick-dry formula!. Oil & Gasoline Resistant. 12 oz.
|
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
Wood Putty - Mahogany , 6 OZ from FAMOWOOD
A quick and easy way to fill nicks and scratches in woodReal wood in a plastic base. Perfect for filling nicks and scratches in virtually any wood. Dries fast, sands easily and can be painted over. Dries fast.
|
|
Skid-No-More Paint
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Skid-No-More Paint
Textured, skid-resistant acrylic latex coating for docks, ramps, steps or poolside. Excellent alternative to nonskid tape. Light gray color can be tinted using gel coat coloring agents. Easy-to-apply nonskid coating for deck or dock. Use in place of nonskid tape. Light gray color can be tinted using coloring agents.
Part No: 100853
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Skid-No-More Paint
Textured, skid-resistant acrylic latex coating for docks, ramps, steps or poolside. Excellent alternative to nonskid tape. Light gray color can be tinted using gel coat coloring agents. Easy-to-apply nonskid coating for deck or dock. Use in place of nonskid tape. Light gray color can be tinted using coloring agents.
Part No: 100854
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid->6149 Easypoxy White Undercoater
Use to fill small surface blemishes and imperfectionsUse as a base coat for Easypoxy enamels when the surface is less than smooth. Can be applied to fiberglass, wood and previously painted surfaces. Dries quickly. Easy to sand. Formulation: One-part high-build primer. Number of Coats Recommended: One or more, depending on surface condition. Drying Time: To recoat: 2 to 16 hrs. Coverage: 100 sq. ft/qt, 400 sq. ft/gal. .
Part No: 6149-QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid->PropSpeed
New performance coating for propellersUnlike conventional antifouling paint which does not adhere well to underwater metal, or when it does, reduces performance, this unique, environmentally-friendly, two-part coating system bonds to your boat’s propeller and running gear with no recoating needed for a year or more. Its “foul release” formulation reduces drag by preventing marine growth from attaching, resulting in fuel savings, and improved top end speed and performance.
Part No: PS-0200-K
|
|
|
|
Home -> Paint & Maintenance -> Tools
Soft tool bag resists weather, won't skid More practical than a rigid tool box, this bag easily stores in the odd-shaped nooks and crannies of boats. The tough tarpaulin construction is enhanced by a polyester bottom with rubber strips to keep it from siding across your deck! Features: Large internal compartment with 12 tool loops . External compartment with weather-resistant zipper. Includes: Carpet-bag-style handles . Dimensions: 14"L x 12 1/2"W x 11"H.
Part No: 1258
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
Cleans and brightens fiberglass—and much more!Cleans and brightens fiberglass, marine metals and vinyl. Easy to use on most surfaces above the waterline. great for non-skid decks. Removes dirt, grease, grime, chalking on fiberglass and aluminum boats, and much much more. Makes difficult cleaning jobs easy. Quart.
Part No: MK2132
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid->545 Anti-Corrosive Epoxy Primer, (Professional Application Only)
For steel, aluminum, wood or fiberglass. Spray, brush, roll on. Covers up to 497 sq. ft. /gal. Recoat in 12 hours. NOTE: Awlgrip is intended for professional application only and is not available for sale to retail customers.
Part No: OD1001/1GLUS
|
|
|