Top Sellers
|
|
Marine Dry Lube from CRC MARINE
Superior dry lubrication for moving or stationary parts. Displaces moisture and inhibits corrosion. Fortified with PTFE to provide a micro-thin film that won’t attract dust or dirt. Dries in seconds. Will not stain sails or clothes. Great for mast track, genoa or traveler T-track, headsail grooves, hinges, zippers, headfoils, and sliders.
|
1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.
|
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
|
Sail Ties, Blue 5FT from WEST MARINE
Sail ties with a clever twistOur premium-quality tubular nylon webbing ties have a clever twist: a sewn loop at one end, with a twist that keeps the eye open so it’s easy to thread even with cold hands. Tie a simple slip knot and you’re done! Color-coded so you can quickly select the size you need.
|
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
|
Dacron Sail Repair Tape, 3" x 15' from BAINBRIDGE
Make emergency sail repairs with tough, sticky Dacron tape For temporary, emergency sail repairs. Much tougher, stronger, and stickier than spinnaker repair tape.
|
Dacron Sail Repair Tape, 3" x 150' from BAINBRIDGE
Make emergency sail repairs with tough, sticky Dacron tape For temporary, emergency sail repairs. Much tougher, stronger, and stickier than spinnaker repair tape.
|
Sail Tie, Ball End 16IN, Blue from STARBRITE
Securing your mainsail to the boom is simpler and quicker when you use sail lashes instead of conventional ties. Dual lengths of durable, UV-resistant polyester plastic cord have polyethylene ball ends with brass stops and damping rings. Color-coded balls.
|
Single Channel-Mate Glass Channel, 7/16"W from BECKSON MARINE
This window track is ideal for window glass or for installing sliding cabinet doors. Each channel groove is slightly (. 005") narrower than 1/4" window glass so there is positive pressure against the glass at all times. It seals out leaks and prevents glass from rattling. Made of B-FLEX marine plastic, it will not crack or discolor. The elevated slide at the bottom of the channel makes windows or doors easy to open and close. Sold in 8' lengths.
|
Hour Tach Meter 1 or 2 Cylinder from DYER SPECIALTY
Hour Tach Meter Surface Mounted Inductive Meters provide what today's power-sports user need and expect from hour meters and hour tach meters. Knowing what to service and when, is the key to a successful preventative maintenance program for your motorcycle, ATV, PWC, Boat and Generator. Installation is easy with simple patented one wire hook-up. Encapsulated exopy case is water resistant. Hour Meter Track the Service Life of Your Vehicle - oil changes, valve, adjustments, spark plugs, etc. .
|
Sail Repair Kit, Right Hand from BAINBRIDGE
Includes adjustable sailmaker's palm, wax, twisted thread, and tube of 10 needles.
|
Folding Dock/Raft ladder 3 step from GARELICK
Unique flip-up hinge mechanismUnique hinged ladder flips up and out of the water to prevent marine growth. Features a 10° angle for effortless boarding. Quick-release pins make it easy to remove for storage. 16"W steps have anodized aluminum tread and a curved step to make boarding more comfortable. Overall ladder width is 18". One-year warranty. Wide track 18"W ladder with full width 16" steps. Anodized aluminum heavy-walled 1"dia. tube construction.
|
Sail Needles from BAINBRIDGE INTL
Sail Needles. Package of 7 assorted needles including 2 curved needles.
|
Stretch 'N' Slide Dock Line from GREENFIELD PRODUCTS
The easiest docking you've ever done! The 4' Stretch 'N Slide dock line stretches to 8' long and has 7 individual loops, so you'll always have the perfect length for easy tie up. Secures your boat to the dock in seconds.
|
|
Slide T Track & Sail Track
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Genoa Track Slides
Tough plastic inserts allow Ronstan’s stainless steel genoa cars to move easily without scarring the track.
Part No: RC73202
|
|
|
|
Home -> Cordage -> Rigging Products -> Slides & Shackles->Sail Track Stops
For mast or boom Knurled wheels for easy release HD anodized aluminum & marine grade nickel-plated brass .
Part No: 2351
|
|
|
|
Home -> Sailboat -> Rigging Products->Sail Track Stops
For mast or boom Knurled wheels for easy release HD anodized aluminum & marine grade nickel-plated brass .
Part No: 2352
|
|
|
|
Home -> Cordage -> Rigging Products -> Slides & Shackles->Sail Track Stops
For mast or boom Knurled wheels for easy release HD anodized aluminum & marine grade nickel-plated brass .
Part No: 02350
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Stainless-Steel Genoa Slides
Die-formed stainless steel, tumbled and polished. Spring pin stop. Includes polyethylene liners .
Part No: 72-49
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Series 25 Jib Lead System
Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment. Composite jib lead cars continue the design philosophy of the award-winning Ronstan BB and RT Orbit Blocks™, with virtually all metal components now replaced with high-tech polymers and fibre equivalents. Integrated Functionality The clever 2-piece car body is moulded from a composite material that delivers low friction on the alloy track without the need for separate inserts.
Part No: RC72537
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Series 25 Jib Lead System
Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment. Composite jib lead cars continue the design philosophy of the award-winning Ronstan BB and RT Orbit Blocks™, with virtually all metal components now replaced with high-tech polymers and fibre equivalents. Integrated Functionality The clever 2-piece car body is moulded from a composite material that delivers low friction on the alloy track without the need for separate inserts.
Part No: RC72504
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Series 25 Jib Lead System
Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment. Composite jib lead cars continue the design philosophy of the award-winning Ronstan BB and RT Orbit Blocks™, with virtually all metal components now replaced with high-tech polymers and fibre equivalents. Integrated Functionality The clever 2-piece car body is moulded from a composite material that delivers low friction on the alloy track without the need for separate inserts.
Part No: RC72536
|
|
|
|
Home -> Sailboat -> Blocks->Spring-Loaded Blocks on Slides
Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45° to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38’. Bearings: Plain bearing. Shackle/Strap Type: 45° stand-up-spring shackle on T-Track slider. Configuration: Genoa lead block, 1" or 1-1/4" T-Track.
Part No: 705-92
|
|
|
|
Home -> Cordage -> Rigging Products->Sail Slides & Shackles
These nickel alloy and stainless steel slides are used on most boats with external mast tracks. For 5/8" and 7/8" track.
Part No: PB014SS/2
|
|
|
|
Home -> Sailboat -> Blocks->Spring-Loaded Blocks on Slides
Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45° to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38’. Bearings: Plain bearing. Shackle/Strap Type: 45° stand-up-spring shackle on T-Track slider. Configuration: Genoa lead block, 1" or 1-1/4" T-Track.
Part No: 504-82
|
|
|
|
Home -> Sailboat -> Blocks->Spring-Loaded Blocks on Slides
Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45° to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38’. Bearings: Plain bearing. Shackle/Strap Type: 45° stand-up-spring shackle on T-Track slider. Configuration: Genoa lead block, 1" or 1-1/4" T-Track.
Part No: 303-86
|
|
|