1/4" Clevis Pin dia., 7/16" inside dia., 6-pack from WEST MARINE
Stainless-Steel Cotter Rings.

12V Double Trumpet Horn - 8"W x 16"L, 115 dB from SEAFIT HORNS
Stainless steel horn looks good, sounds good These horns will retain their gleaming good looks for years thanks to their stainless construction. Unlike some other look-alike horns, even the trumpet bells are all stainless—not plastic. The pleasing tone commands attention without being obnoxious. Pre-wired for easy hook-up to your boat’s 12-volt system. Material: Stainless Steel . Single: 4"W x 14"L. Double: 8"W x 16"L. Design Standards: ABYC for boats up to 20 meters .

4-3/8"W x 12-3/4"L Louvered Vent, 3" or 4" for Vents, #8 Fastener Size from SEAFIT
These all-welded-construction vents are made from 304 stainless steel. Highly polished for maximum corrosion-resistance and good looks. Type: Louvered . Material: 304 stainless steel .

3-1/2" Thread Length Bow Eye, 1/2" Thread Dia., 1-1/2" Width of Eye from SEAFIT
Machined from 304 stainless steel.

12V Single Trumpet Horn - 4"W x 14"L, 118 dB from SEAFIT HORNS
Stainless steel horn looks good, sounds good These horns will retain their gleaming good looks for years thanks to their stainless construction. Unlike some other look-alike horns, even the trumpet bells are all stainless—not plastic. The pleasing tone commands attention without being obnoxious. Pre-wired for easy hook-up to your boat’s 12-volt system. Material: Stainless Steel . Single: 4"W x 14"L. Double: 8"W x 16"L. Design Standards: ABYC for boats up to 20 meters .

Stainless Louvered Vent from SEAFIT
Stamped and polished stainless steel construction for 3" or 4" vents. Type: Louvered . Material: Stainless steel . Dimensions: 4-3/8"W x 12-13/16"L x 7/8"D. Cutout Size: 3-5/8"W x 12"L .

3"W x 16-7/8"L Louvered Vent, 3" for Vents, #6 Fastener Size from SEAFIT
These all-welded-construction vents are made from 304 stainless steel. Highly polished for maximum corrosion-resistance and good looks. Type: Louvered . Material: 304 stainless steel .

15" Stainless-Steel Yacht Cleat, Four 3/8" Fasteners from SEAFIT
Sleek, modern design makes decks look stylish while providing the ultimate in corrosion protection when anchoring or docking.

18" Stainless Steel Flag Pole from TAYLOR
Stainless steel flagstaffs always look grand Quality stainless-steel flag poles clamp or socket mount to fly your colors. Lengths from 18" to 48. " An excellent non-corroding staff for displaying ensigns, courtesy flags and more.

5" Aft-Leaning Garmin Stainless Power Mount from SEAVIEW
Stainless power mounts constructed of 316 stainless steel with 7" square mounting base. Light bar is optional. Power mount accessories sold separately.

Silverado Stainless Propeller, 13-3/4" x 21" from MERCURY MARINE
These general purpose three blade stainless props offer enhanced performance compared to aluminum, with thinner blades, higher resistance to flex and improved repairability.

6" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.

Slip-Ring Fluke Anchor for Boat Length to 22', 11lb., Blue from GREENFIELD PRODUCTS
This anchor combines the firm penetration of its traditional fluke style with a slip ring that makes it especially easy to retrieve in the event of a snag. It features a durable PVC coating that protects boat finishes, stays cleaner, and buffers rattling and vibration while underway. Combine it with the Coated Anchor Chain (below) in coordinated colors to match your watercraft Style: Light-duty fluke . Material: PVC-coated, hot-dip galvanized steel . Recommended Scope (line:depth): 7:1 .

Silverado Stainless Propeller, 14-1/2" x 17" from MERCURY MARINE
These general purpose three blade stainless props offer enhanced performance compared to aluminum, with thinner blades, higher resistance to flex and improved repairability.

Stainless-Steel Genoa Slide for 1-1/4" T-Track from SCHAEFER
Die-formed stainless steel, tumbled and polished. Spring pin stop. Includes polyethylene liners .