Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.

Stainless Portlight from LEWMAR
The Stainless Portlight features a highly polished stainless outer frame with a mirror finish quality. The handles and hinge systems are from the Standard Portlight and leave the lens clear of obstructions for a cleaner look. Smoked gray acrylic lens, stainless steel frame. Latches with quick action handles. Friction hinges hold position without stays or straps. Cutout template included. Comes with trim ring, fasteners, template and instructions.

Stainless-Steel “S” Hook, 3/16" Wire Dia., 5/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.

Stainless-Steel Rub Strake, 1"W x 24"L from TACO PRODUCTS
Polished stainless steel guards protect lines against chafe from cap rails, gunwales, etc. Material: Marine-grade stainless steel .

Cabinet Handle, Stainless Steel Bar 7" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.

Stainless Strap Hinge, 2 5/8 inch from WEST MARINE
Type 304 electro-polished. Gauge: 0. 060 stainless steel. Drilled and countersunk for #8 fasteners (not included). Sold in pairs. ShWt .

Stainless-Steel Rub Rail, End, 1"H x 12"L; Requires #8 Screws from TACO PRODUCTS
Fits a wide variety of vinyl profiles Hollow back (marine grade type 304) has concave back to fit rigid vinyl rub rails and provide added protection and chrome-like accent around entire boat. Most widely used stainless-steel inserts fit the largest variety of vinyl profiles on the market. Solid back stainless-steel rub rail provides premium heavy-duty protection and a polished finish for your boat.

316 Stainless-Steel Hose Clamp, 7/16" to 11/16", SAE Size 3 from ABA OF AMERICA
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .

Stainless-Steel Full-Flow Ball Valve, 1/4" Size (NPT) from GROCO
Components include 316 stainless-steel body, 304 stainless-steel handle, PTFE seals and seats.

4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.

Cabinet Handle, Stainless Steel Bar 13" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.

304 Stainless-Steel Hose Clamp, 3-1/8" to 4", SAE Size 56 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .

Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .

Screen Kit Hinge from LEWMAR
Allows the aluminum framed screen included with Lewmar Trim and Screen Kits to be hinged for easier access to the hatch.

45lb. CQR Anchor, Boats 32'–58', 40-5/8"L x 14"W x 17"H from LEWMAR
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .