Top Sellers
|
|
|
|
|
|
3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .
|
Snap Hook, 4"L, 3300lb. Breaking Strength from WICHARD
Drop-forged from 316L stainless steel for outstanding strength.
|
Large Fixed Bail Snap Shackle from WICHARD
All our snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by increasing its elasticity and maximizing the steel's internal strength. A forged snap shackle will deform long before breaking; it will not burst or break suddenly.
|
Diamond Pad Eye 3-1/4" from SUNCOR
Diamond Pad Eyes. Heavy-Duty, one-piece precision casting.
|
Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.
|
Stainless-Steel “S” Hook, 3/16" Wire Dia., 5/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.
|
Adjustable Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.
|
2-3/4"L Small Swivel Bail Shackle, 5/8" Snap, 7/16" Bail, 2645lb. MWL from WICHARD
Highest quality drop-forged 17-4 PH stainless-steel shackles are beautifully polished, with smooth contours. Great strength and reliability.
|
|
|
Stainless-Steel Rub Strake, 1"W x 24"L from TACO PRODUCTS
Polished stainless steel guards protect lines against chafe from cap rails, gunwales, etc. Material: Marine-grade stainless steel .
|
Cabinet Handle, Stainless Steel Bar 7" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
Stainless Strap Hinge, 2 5/8 inch from WEST MARINE
Type 304 electro-polished. Gauge: 0. 060 stainless steel. Drilled and countersunk for #8 fasteners (not included). Sold in pairs. ShWt .
|
|
Stainless Snaps - Fast Eye
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless Snaps - Fast Eye
316 Stainless Steel.
Part No: S-4034P
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless Snaps - Fast Eye
316 Stainless Steel.
Part No: S-4033P
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless Snaps - Fast Eye
316 Stainless Steel.
Part No: S-4032P
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Titanium Snap Shackles
Forged in HR stainless steel or Titanium. Designed and made in France. Available with swivel eye, large eye or swivel shackle. Ideal for spinnaker sheets. Outstanding working loads. Opens manually or with a fid.
Part No: 52653
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Titanium Snap Shackles
Forged in HR stainless steel or Titanium. Designed and made in France. Available with swivel eye, large eye or swivel shackle. Ideal for spinnaker sheets. Outstanding working loads. Opens manually or with a fid.
Part No: 52657
|
|
|
