7/16" G40 Chain, 7200lb. SWL, 21,600lb. Breaking Strength, 2.05lb./ft., 300' Standard Pack from ACCO CHAIN
Hot-Dipped galvanized Grade 40 HT Acco anchor chain! An industry standard, hot-galvanized, high-tensile anchor chain combines both high tensile strength and is resistance to wear. Meets ISO standards . Calibrated to ensure the proper fit for your windlass. 7200 lbs.

26" Destroyer Wheel from EDSON CORPORATION
These 5-spoke wheels are the latest addition to Edson’s line of Destroyer™ Wheels. Attractive, dished shape and newly-styled, straight hub. Tapered, hollow spokes. Lightweight 1" ovalized grip tubing is the industry standard for smooth wheel steering. 1" bore fits most Edson wheel shafts. Requires Wheel Nut fastener.

Maximum Mold Release Wax from MEGUIARS
Release wax works well in a wide range of tooling and molding applicationsA blend of premium imported waxes formulated to provide the maximum number of releases per application. The industry standard. Especially useful on tooling and new molds. 11oz.

Large Funnel - 5GPM, 10"H x 8-1/2"Dia., 100 Micron from WEST MARINE
Fuel/Water Separator These filters were tested by Powerboat Reports (March 2003) and rated better than other more expensive funnels. Teflon-coated, stainless-steel filter separates water and dirt from gasoline, diesel and kerosene fuels. Made from industrial standard electroconductive polypropylene that can be grounded for extra safety. Tested and rated by Powerboat Reports (March 2003) better than other more expensive funnels. Separate water and dirt from gasoline, diesel and kerosene fuels.

Electric Fuel Gauge Sending Unit, 6" to 12" from MOELLER
These sending units fit the industry-standard bolt-hole pattern and 240-33 Ohm gauges. Internal measurement components will not rust or corrode.

Princess Propane Range - 3-Burner from SEAWARD PRODUCTS
These Seaward ranges were rated #1 by Practical Sailor and Powerboat Reports. They feature stainless-steel construction and fuel lines, AGA approved thermocouple valves that shut off in case burners are extinguished, and piezo electric ignition that needs no electrical hookup. Safety clips secure range tops to eliminate rattling. Thermostatically-controlled 8000 Btu ceramic oven maintains steady temperature, distributes heat evenly, makes cleaning easy and conserves fuel. Built to ANSI Z. 21.

Pivoting Self-Launch Bow Roller from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.

Snap-On Cable Cover, 1/4" Wire Dia. from DAVIS INSTRUMENTS
White vinyl cable covers in 6' lengths. Tubes split down length and install in seconds.

Glasskoter Resin Roller Cover - 9" x 3/8" Nap from CORONA
For epoxy and polyester resinPhenolic core. Woven mohair. 3/8" nap for semi-smooth or 1/8" nap for fine finishes.

Type IV Standard Buoyant Cushion - White from KENT
Conventional throwable cushions meet USCG requirements for Type IV PFDs. Comfortable to sit on or to use as a backrest. Durable fabric covers. Heavy polypropylene straps make them easy to throw. Buoyancy: 18 lbs. Dimensions: 15"L x 16"W x 2. 5"H.

Replacement Delrin Roller, 3" Dia., 3-3/8" Width from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.

Replacement Delrin Roller, 2-1/2" Dia., 1-3/4 Width from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.

Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.

Fleece Fender Cover, Fits Fenders 10" x 26", Black from TAYLOR
Perfect for use with Big B and other center-tube style fenders, these 100% polyester fleece covers will provide posh protection for your boat! Made of rugged, 12-ounce Blizzard fleece, they are UV- light and tear-resistant. The draw string hem enables adjustment for a snug fit and also permits removal for washing.

Bow Roller, Fits Sand (Danforth Style), Anchors up to 20 lb., Special Narrow Width (US Only) from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.