Top Sellers
SE Sport 300 Hydrofoil, White, 40 to 350HP Engine Capacity from SPORT MARINE TECHNOL
Especially good for deck boats and pontoon boats Adding this hydrofoil gives you a whole new level of control. Corner tighter, defeat cavitation and prop blow out. The patented sleek shape is rated the fastest hydrofoil plate in its class by independent testing. Narrow footprint translates to less resistance drag in the water for greater speed and lower rpm. Maintains top end speed smoothly and pops you out of the hole quicker. Turn a sluggish deck/pontoon boat into a sharp-turning machine.
|
SE Sport 300 Hydrofoil, Black, 40 to 350HP Engine Capacity from SPORT MARINE TECHNOL
Especially good for deck boats and pontoon boats Adding this hydrofoil gives you a whole new level of control. Corner tighter, defeat cavitation and prop blow out. The patented sleek shape is rated the fastest hydrofoil plate in its class by independent testing. Narrow footprint translates to less resistance drag in the water for greater speed and lower rpm. Maintains top end speed smoothly and pops you out of the hole quicker. Turn a sluggish deck/pontoon boat into a sharp-turning machine.
|
The Original Doel-Fin Hydrofoil from DAVIS INSTRUMENTS
Get your boat on a plane quickly by increasing the lift generated by the engine. They also allow you to go more slowly while still remaining on a plane, so fuel consumption is decreased. The injection-molded tenite polypropylene fins install easily on the cavitation plate of most outboards from 5 hp and up . Includes Mounting hardware .
|
|
|
Transom Trim Control from T-H MARINE
Weatherproof tilt control switch can be installed anywhere on the boat, such as back by the motor for more convenience. Can adjust trim or jack plates.
|
Solenoid Valve, Red Wire from BENNETT MARINE
Installation and replacement parts for Bennett Trim Tabs.
|
AC3000 Auto Trim Tab Control from BENNETT MARINE
Automatic controls for your Bennett Trim Tab system Give your trim tab system real smarts! The Auto Tab Control dials in the perfect running attitude. Just turn it on and it does the rest. Constantly monitors your boat's position and uses your trim tabs to maintain a perfect cruising attitude. Saves fuel and creates the perfect ride .
|
4" Atlas Hydraulic Jack Plate from T-H MARINE
T-H Marine introduces the next generation in jack plate design, built for the heaviest and most powerful V6 engines on the market today, even the big four strokes. Its innovative high-tech engineered polymer rod and slot lifting design guarantees trouble-free action. This plate also features the newest concept in one-piece hydraulics from the most respected name in hydraulic design, providing the best of all worlds: Speed and self-contained lifting action.
|
|
StingRay Hydrofoils
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->StingRay Hydrofoils
The system is based on the Hydrofoil Stabilizer, now made with SPEED-XP™, an extreme performance hydrophilic material that increases the speed that can be achieved over previous models. SPEED-XP™ binds a thin layer of water to the foil, dramatically reducing hydrodynamic drag and improving overall performance. Unlike simple curved or flat planing aids, the StingRay actually creates lift, improving cornering ability. Reduce hydrodynamic drag and improve fuel efficiency and overall performance.
Part No: JR-XRIII-3
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->StingRay Hydrofoils
The system is based on the Hydrofoil Stabilizer, now made with SPEED-XP™, an extreme performance hydrophilic material that increases the speed that can be achieved over previous models. SPEED-XP™ binds a thin layer of water to the foil, dramatically reducing hydrodynamic drag and improving overall performance. Unlike simple curved or flat planing aids, the StingRay actually creates lift, improving cornering ability. Reduce hydrodynamic drag and improve fuel efficiency and overall performance.
Part No: SR-XPII-2
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->StingRay Hydrofoils
The system is based on the Hydrofoil Stabilizer, now made with SPEED-XP™, an extreme performance hydrophilic material that increases the speed that can be achieved over previous models. SPEED-XP™ binds a thin layer of water to the foil, dramatically reducing hydrodynamic drag and improving overall performance. Unlike simple curved or flat planing aids, the StingRay actually creates lift, improving cornering ability. Reduce hydrodynamic drag and improve fuel efficiency and overall performance.
Part No: SR-XRIII-3
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->StingRay Hydrofoils
The system is based on the Hydrofoil Stabilizer, now made with SPEED-XP™, an extreme performance hydrophilic material that increases the speed that can be achieved over previous models. SPEED-XP™ binds a thin layer of water to the foil, dramatically reducing hydrodynamic drag and improving overall performance. Unlike simple curved or flat planing aids, the StingRay actually creates lift, improving cornering ability. Reduce hydrodynamic drag and improve fuel efficiency and overall performance.
Part No: SR-XPII-3
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->StingRay Hydrofoils
The system is based on the Hydrofoil Stabilizer, now made with SPEED-XP™, an extreme performance hydrophilic material that increases the speed that can be achieved over previous models. SPEED-XP™ binds a thin layer of water to the foil, dramatically reducing hydrodynamic drag and improving overall performance. Unlike simple curved or flat planing aids, the StingRay actually creates lift, improving cornering ability. Reduce hydrodynamic drag and improve fuel efficiency and overall performance.
Part No: SR-XRIII-2
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->StingRay Performance Hydrofoils
The StingRay Performance System will get your boat on plane faster, eliminate chinewalking and porpoising, and improve stability and fuel efficiency. SPEED-XP™ technology binds a thin layer of water to the foil, dramatically reducing drag (on XPII and XPIII models). StingRay is easy to install and includes all necessary hardware. StingRay Junior shares many of the same great features as the original StingRay and makes them available to smaller engines (from 1-1/2–40hp).
Part No: JR-XPI-3
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->StingRay Performance Hydrofoils
The StingRay Performance System will get your boat on plane faster, eliminate chinewalking and porpoising, and improve stability and fuel efficiency. SPEED-XP™ technology binds a thin layer of water to the foil, dramatically reducing drag (on XPII and XPIII models). StingRay is easy to install and includes all necessary hardware. StingRay Junior shares many of the same great features as the original StingRay and makes them available to smaller engines (from 1-1/2–40hp).
Part No: JR-XPI-1
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->StingRay Performance Hydrofoils
The StingRay Performance System will get your boat on plane faster, eliminate chinewalking and porpoising, and improve stability and fuel efficiency. SPEED-XP™ technology binds a thin layer of water to the foil, dramatically reducing drag (on XPII and XPIII models). StingRay is easy to install and includes all necessary hardware. StingRay Junior shares many of the same great features as the original StingRay and makes them available to smaller engines (from 1-1/2–40hp).
Part No: SR-XRIII-1
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->StingRay Performance Hydrofoils
The StingRay Performance System will get your boat on plane faster, eliminate chinewalking and porpoising, and improve stability and fuel efficiency. SPEED-XP™ technology binds a thin layer of water to the foil, dramatically reducing drag (on XPII and XPIII models). StingRay is easy to install and includes all necessary hardware. StingRay Junior shares many of the same great features as the original StingRay and makes them available to smaller engines (from 1-1/2–40hp).
Part No: SR-XPI-3
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->StingRay Performance Hydrofoils
The StingRay Performance System will get your boat on plane faster, eliminate chinewalking and porpoising, and improve stability and fuel efficiency. SPEED-XP™ technology binds a thin layer of water to the foil, dramatically reducing drag (on XPII and XPIII models). StingRay is easy to install and includes all necessary hardware. StingRay Junior shares many of the same great features as the original StingRay and makes them available to smaller engines (from 1-1/2–40hp).
Part No: SR-XPI-1
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->StingRay Performance Hydrofoils
The StingRay Performance System will get your boat on plane faster, eliminate chinewalking and porpoising, and improve stability and fuel efficiency. SPEED-XP™ technology binds a thin layer of water to the foil, dramatically reducing drag (on XPII and XPIII models). StingRay is easy to install and includes all necessary hardware. StingRay Junior shares many of the same great features as the original StingRay and makes them available to smaller engines (from 1-1/2–40hp).
Part No: SR-XPII-1
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->StingRay Hydrofoils
The system is based on the Hydrofoil Stabilizer, now made with SPEED-XP™, an extreme performance hydrophilic material that increases the speed that can be achieved over previous models. SPEED-XP™ binds a thin layer of water to the foil, dramatically reducing hydrodynamic drag and improving overall performance. Unlike simple curved or flat planing aids, the StingRay actually creates lift, improving cornering ability. Reduce hydrodynamic drag and improve fuel efficiency and overall performance.
Part No: SR-XPI-2
|
|
|
