Top Sellers
T-Ball Swage Fitting, 1/8" Wire Size from ALEXANDER-ROBERTS
Electropolished 316 stainless steel. Running Back style has a stainless bail rather than a swage end, to accept Dyneema or other rope for a running backstay. *Running Back style has a stainless bail rather than a swage end to accept Spectra or other rope for a running backstay. Style: Swage . Material: Electropolished Type 316 stainless steel . Configuration: T-ball swage .
|
|
|
3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .
|
Dyform Wire - 6MM 1X19, 7810BL from NAVTEC
Control your rig and sail plan more accurately with a low-stretch, high-performance wire strand. Dyform is an essential performance requirement on many racing sailboats and on cruising yachts seeking higher performance and greater margins of safety. It has 30% greater breaking strength and 25% less stretch than conventional wire strand. Wire strands are specially shaped to fill more cross sectional area for greater resistance to elastic stretch. Same corrosion resistance of 316S31 stainless.
|
Panel Mount Thermal Circuit Breaker, 50A from BLUE SEA SYSTEMS
An economical solution for high amperage loads where dependability is required in marine environments. Waterproof and ignition-protected (conforming to SAE J1171) so these circuit breakers are safe for installation aboard gasoline-powered boats. Ideal for branch circuits, windlasses, inverters and watermakers. False-trip free—designed to trip when subjected to a fault current. Available in panel and surface mounts. Interrupt Rating: 3000A at 12V DC. Voltage Compatibility: 42V DC.
|
Pair of Wrap Pins for 1/4" Turnbuckle from C SHERMAN JOHNSON
Wrap pins are Velcro locking devices used to secure turnbuckles without having to bend over the end of the cotter pins.
|
|
Swage Studs
|
|
Home -> Cordage -> Rigging Products->Threaded Swage Studs
Sealoc Swage Stud|SEALOC SWAGE STUD.
Part No: RF1512M-0404
|
|
|
|
|
Home -> Cordage -> Rigging Products->Threaded Swage Studs
Sealoc Swage Stud|SEALOC SWAGE STUD.
Part No: RF1510-0604
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Terminals->Swage Studs
.
Part No: 32-628
|
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Terminals->Swage Studs
The “wire end” of the turnbuckle generally uses right hand (RH) threads, and the “deck end” uses left hand (LH) threads.
Part No: 32-629
|
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Terminals->Swage Studs
The “wire end” of the turnbuckle generally uses right hand (RH) threads, and the “deck end” uses left hand (LH) threads.
Part No: 32-608
|
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Terminals->Swage Studs
.
Part No: 32-611
|
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Terminals->Swage Studs
.
Part No: 32-622
|
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Terminals->Swage Studs
.
Part No: 32-620
|
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Terminals->Swage Studs
.
Part No: 32-627
|
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Terminals->Swage Studs
.
Part No: 32-619
|
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Terminals->Swage Studs
The wire end of the turnbuckle generally uses right hand (RH) threads, and the deck end uses left hand (LH) threads.
Part No: 32-604
|
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Terminals->Swage Studs
The “wire end” of the turnbuckle generally uses right hand (RH) threads, and the “deck end” uses left hand (LH) threads.
Part No: 32-613
|
|
|
