Welcome! Please Sign-In
Top Sellers
Marine Dry Lube from CRC MARINE
Marine Dry Lube from CRC MARINE
Superior dry lubrication for moving or stationary parts. Displaces moisture and inhibits corrosion. Fortified with PTFE to provide a micro-thin film that won’t attract dust or dirt. Dries in seconds. Will not stain sails or clothes. Great for mast track, genoa or traveler T-track, headsail grooves, hinges, zippers, headfoils, and sliders.
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
Sail Tie, Ball End 16IN, Blue from STARBRITE
Sail Tie, Ball End 16IN, Blue from STARBRITE
Securing your mainsail to the boom is simpler and quicker when you use sail lashes instead of conventional ties. Dual lengths of durable, UV-resistant polyester plastic cord have polyethylene ball ends with brass stops and damping rings. Color-coded balls.
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
Sail Ties, Blue 5FT from WEST MARINE
Sail Ties, Blue 5FT from WEST MARINE
Sail ties with a clever twistOur premium-quality tubular nylon webbing ties have a clever twist: a sewn loop at one end, with a twist that keeps the eye open so it’s easy to thread even with cold hands. Tie a simple slip knot and you’re done! Color-coded so you can quickly select the size you need.
Dacron Sail Repair Tape, 3" x 15' from BAINBRIDGE
Dacron Sail Repair Tape, 3" x 15' from BAINBRIDGE
Make emergency sail repairs with tough, sticky Dacron tape For temporary, emergency sail repairs. Much tougher, stronger, and stickier than spinnaker repair tape.
Dacron Sail Repair Tape, 3" x 150' from BAINBRIDGE
Dacron Sail Repair Tape, 3" x 150' from BAINBRIDGE
Make emergency sail repairs with tough, sticky Dacron tape For temporary, emergency sail repairs. Much tougher, stronger, and stickier than spinnaker repair tape.
Hour Tach Meter 1 or 2 Cylinder from DYER SPECIALTY
Hour Tach Meter 1 or 2 Cylinder from DYER SPECIALTY
Hour Tach Meter Surface Mounted Inductive Meters provide what today's power-sports user need and expect from hour meters and hour tach meters. Knowing what to service and when, is the key to a successful preventative maintenance program for your motorcycle, ATV, PWC, Boat and Generator. Installation is easy with simple patented one wire hook-up. Encapsulated exopy case is water resistant. Hour Meter Track the Service Life of Your Vehicle - oil changes, valve, adjustments, spark plugs, etc. .
Sail Repair Kit, Right Hand from BAINBRIDGE
Sail Repair Kit, Right Hand from BAINBRIDGE
Includes adjustable sailmaker's palm, wax, twisted thread, and tube of 10 needles.
CP Zinc Sliding Window Stop from PERKO
CP Zinc Sliding Window Stop from PERKO
Chrome-plated zinc with plastic cover on stopping plate. . Base measures 3/4"W x 1 7/8"L. . Requires #8 fasteners (not included). . Stopping plate length: 1 1/2'' . Made in U. S. A.
Single Channel-Mate Glass Channel, 7/16"W from BECKSON MARINE
Single Channel-Mate Glass Channel, 7/16"W from BECKSON MARINE
This window track is ideal for window glass or for installing sliding cabinet doors. Each channel groove is slightly (. 005") narrower than 1/4" window glass so there is positive pressure against the glass at all times. It seals out leaks and prevents glass from rattling. Made of B-FLEX marine plastic, it will not crack or discolor. The elevated slide at the bottom of the channel makes windows or doors easy to open and close. Sold in 8' lengths.
Folding Dock/Raft ladder 3 step from GARELICK
Folding Dock/Raft ladder 3 step from GARELICK
Unique flip-up hinge mechanismUnique hinged ladder flips up and out of the water to prevent marine growth. Features a 10° angle for effortless boarding. Quick-release pins make it easy to remove for storage. 16"W steps have anodized aluminum tread and a curved step to make boarding more comfortable. Overall ladder width is 18". One-year warranty. Wide track 18"W ladder with full width 16" steps. Anodized aluminum heavy-walled 1"dia. tube construction.
Sail Needles from BAINBRIDGE INTL
Sail Needles from BAINBRIDGE INTL
Sail Needles. Package of 7 assorted needles including 2 curved needles.
Storage Locker with Hinged Door from SAIL SYSTEMS
Storage Locker with Hinged Door from SAIL SYSTEMS
Increase your available storage area and save space at the same time. This recessed storage locker uses a continuous stainless steel hinge on the access door for long-lasting strength. Made of weather-able, acrylic capped ABS plastic for superior gloss, color retention and UV protection. Measures 11 3/4"H x 19 3/4"W x 7 1/4"D.
Shore Power Cord Storage & Connector Box from SAIL SYSTEMS
Shore Power Cord Storage & Connector Box from SAIL SYSTEMS
Connect and store 30 amp shore power and phone cords in this high-gloss acrylic capped ABS box. Molded supports hold coiled power cord and installed connector. Gasketed "Slimline" door with hidden fasteners for a flush look and weather resistance.

T Track & Sail Track Stop

5/8" Stainless-Steel Sail Track Stop from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Sail Track Stops
Stainless-steel end stops protect your sails.
Part No: 74-45
7/8" Stainless-Steel Sail Track Stop from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Sail Track Stops
Stainless-steel end stops protect your sails.
Part No: 74-42
Clear Anodized Track, 1" x 2', 1/4" FH Fasteners from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-62-C
Clear Anodized Track, 1-1/4" x 2', 5/16" FH Fasteners from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-72-C
Black Anodized Track, 1" x 6', 1/4" FH Fasteners from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-66
Clear Anodized Track, 1-1/4" x 4', 5/16" FH Fasteners from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-74
Black Anodized Track, 1-1/4" x 2', 5/16" FH Fasteners from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-72
Clear Anodized Track, 1" x 6', 1/4" FH Fasteners from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-66-C
End Stop, 1", Silver from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->End Stops for T-Track
Protect your feet with these plastic tapered stops.
Part No: 74-35-G
1-1/2" Traveler Track End Stop from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->T-Track End Stops
Stop-End Traveler 1. 5in|Stop-End Traveler 1.
Part No: 74-91
3/4" Traveler Track End Stop from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->T-Track End Stops
Stop-End Traveler 1. 5in|Stop-End Traveler 1.
Part No: 74-34
Track, Black, 50mm (1-31/32”) Stop Hole Centers, 9'10"L, 44.5oz. from RONSTAN Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Series 25 T-Track Traveller System Track
A new "racing" track has 25mm (63/64") stop hole spacing for even more precise control of the car position and sheeting angle. Low profile Lightweight 3/16" countersunk fasteners at 3-15/16" centers.
Part No: RC7251-3.0
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12