Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.

FLAG Resin, 1/2 Gallon from MAS EPOXY
We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a "medium" body resin specifically designed to perform as an adhesive and structural laminating foundation. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener.

Flag Epoxy Repair Kit from MAS EPOXY
For small repairs and bonding; Perfect where only a small amount is needed. Small enough to keep on board, but enough epoxy to make most quick repairs! Kit includes: 16oz. Flag Epoxy Resin. 8oz. medium hardener. 10 mixing sticks. 4pr. gloves.

Tiller Clip from RONSTAN
Nylon tiller extension retaining clip. Fits extensions up to 1"dia.

Kite Release Clips from AFTCO
Super-lightweight composite clips feature a numbered, graduated adjustment slider for precise release tension setting. Large diameter, gold titanium-nitride coated wire bail for less line wear and smooth releases. Kite clip can be ''stacked'' or added to kite line any time.

Holding Clips, 1/4" from BECKSON MARINE INC
Heavy-duty, nonmagnetic, noncorroding clips. Require four #8 FHWS fasteners.

Hatch Riser Arm for 20" x 20" Hatch from TAYLOR
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.

10mm Ball Stud pair from TAYLOR
Taylor 10mm Ball Stud pair.

Accessory Signaling Kit from ORION
A little kit that could save your lifeIncludes visual and audible signals in an orange mesh storage bag with zipper and clip closures. Signals include orange distress flag, SOLAS-approved whistle on lanyard, one signal mirror and 1oz.

Rope Clips from BLUE PERFORMANCE
Rope Clip Webbing. Light Gray. 220 - 320 mm.

84”L Fiberglass Bow from TAYLOR
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.

Replacement Gas Strut, 12" Compressed x 20" Extended Length, 40lb. Rating from TAYLOR
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.

Adjustable Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.

T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.

Welcome Aboard Mat, Navy, 18" X 30" from TAYLOR
High-quality, marine-grade mats will add spice to any deck or door. Made from plush carpet that is waterproof, stain- and fade-resistant. Mats are mold- and mildew-resistant and feature a nonskid rubber backing.