Welcome! Please Sign-In
Top Sellers
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
Tubing-Alu 7/8X20' from WEST MARINE
Tubing-Alu 7/8X20' from WEST MARINE
Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has . 049" wall thickness . Aluminum has . 058" wall thickness . Use 7/8" tubing for smaller powerboats . Use 1" tubing for sailboats and larger powerboats . Available in 6', 12' and 20' lengths .
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
Transom Drain Tube & Plug from MOELLER
Transom Drain Tube & Plug from MOELLER
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.
Speedometer Kit 80mph, 20-80mph, Includes pitot, 20' tubing, Dia, 3.78", Mounting Hole Max/Min, 3.41"/3.44", D 2.7" from TELEFLEX
Speedometer Kit 80mph, 20-80mph, Includes pitot, 20' tubing, Dia, 3.78", Mounting Hole Max/Min, 3.41"/3.44", D 2.7" from TELEFLEX
White dial, black numerals, black pointer with fire-orange tip. Scratch-resistant curved glass lenses with polished stainless steel, near flush bezels. U. S. and metric scales with ISO symbols .
Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Marine lower unit drain, flush and fill tool. Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefishier lower units. Quick, easy and clean way to change marine lower unit gear lube. For use with all 8- and 10-oz.
Transom Drain Tube - 1 x 3" from SEAFIT DRAIN
Sierra-Tube-Exhaust from SIERRA
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
Repl. Cylinder - Repl. Hynautic Model K2 from TELEFLEX
Repl. Cylinder - Repl. Hynautic Model K2 from TELEFLEX
Hydraulic Cylinders -- the same quality steering components that comprise the many Hynautic systems may also be ordered independently for both new or retrofit applications.
ADJ 7-15-DL Whisker Pole, 83"/9lb. Collapsed Length/Weight, 202" Max. Working Length, 2" Tubing Diameters from FORESPAR
ADJ 7-15-DL Whisker Pole, 83"/9lb. Collapsed Length/Weight, 202" Max. Working Length, 2" Tubing Diameters from FORESPAR
These telescoping whisker poles are heavy-duty two-section and three-section aluminum spars which can be extended to lengths up to 17' and securely locked in position by an internal twist lock device. Poles feature self-latching Ultra Series™ fittings on the inboard and outboard ends. Aluminum tubing. End Fitting Inboard: UPX. End Fitting Outboard: UPX.
Universal Speedometer Pitot from TELEFLEX
Universal Speedometer Pitot from TELEFLEX
The slotted mounting plate means no drilling required for replacement installments.
Premium Series Fuel Gauge from TELEFLEX
SeaStar Helm Seal Kit from TELEFLEX
SeaStar Helm Seal Kit from TELEFLEX
Replacement shaft seal kit HS5176 fits various post-1990 SeaStar 1. 4, 1. 7 (I), 2. 0, 2. 4 (II), SeaStar Pro and SeaStar helms.
BayStar Helm Seal Kits from TELEFLEX
BayStar Helm Seal Kits from TELEFLEX
Replacement front seal kits for both front and rear mount helms. HS5147 fits BayStar front mount and SportTilt helms . Contains 3 screws, shaft seal and o-ring seal.
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
A popular choice for gas and diesel inboard engines, White Premier instruments feature white dials with modern black and blue graphics and superior light pipe illumination. When illuminated, black dial grads and pointer become red. Fog-resistant design for enhanced readability.

TELEFLEX Tube

Support Tube - Aluminum from TELEFLEX Home -> Engine Systems -> Steering Systems -> Mechanical Steering->Support Tube
Smooth aluminum tube supports the end of the steering cable before it attaches to the engine. Non threaded for clamp-block applications. Aluminum or stainless.
Part No: SA27274P
Support Tube - Stainless Steel from TELEFLEX Home -> Engine Systems -> Steering Systems->Support Tube
Smooth aluminum tube supports the end of the steering cable before it attaches to the engine. Non threaded for clamp-block applications. Aluminum or stainless.
Part No: SA27275P
Pilot Tubing by the Foot, 25' from TELEFLEX Home -> Engine Systems -> Engine Instruments -> Engine Instr. Components->Pitot Tubing by the Foot
Small vinyl tubing for powerboat speedometers.
Part No: 67457P
Pitot Tubing by the Foot from TELEFLEX Home -> Engine Systems -> Engine Instruments -> Engine Instr. Components->Pitot Tubing by the Foot
Small vinyl tubing for powerboat speedometers.
Part No: 56353P
Spent Travel Tube from TELEFLEX Home -> Engine Systems -> Steering Systems
Spent travel tube with nut Fits Safe-T and Big-T.
Part No: SA35680P
Kit-Cylinder O/B SI from TELEFLEX Home -> Engine Systems -> Steering Systems->SeaStar Side Mount Hydaulic Cylinder Kits
Outboard Cylinders fit most large outboards. Standard side-mount cylinder is an affordable alternative to front mount cylinders. It's easy to install and can be installed in shallow splashwells and on engines fitted with power steering. Can be used with single or twin outboards. Extends about 13'' to the right of the motor tilt tube.
Part No: HC5370
Sterndrive/Inboard Guages - Set of 6 from TELEFLEX Home -> Engine Systems -> Engine Instruments -> Engine Instr. Components
White and red graphics on a black dial background with white pointers on a black hub. Set Consist Of: Tachometer (7000 RPM). 60 MPH Speedometer (With Pitot Tube). Fuel Gauge (Compatible With Common Marine Senders). Water Temperature Gauge (Compatible With Common Marine Senders). Oil Pressure Gauge (Compatible With Common Marine Senders).
Part No: 65485P
Clamp Block - Inboard, 2 5/8" Standoff from TELEFLEX Home -> Engine Systems -> Steering Systems->Clamp Blocks
Used as a standoff from the transom (outboards without tilt tubes) or a stringer (inboard model) for the steering cable.
Part No: SA27578P
Stainless Transom Support Master Mounting Kit from TELEFLEX Home -> Engine Systems -> Steering Systems -> Mechanical Steering->Transom Support Master Mounting Kits
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
Part No: SA27255P
Kit-Cylinder O/B FR from TELEFLEX Home -> Engine Systems -> Steering Systems -> Hydraulic Steering->SeaStar Side Mount Hydaulic Cylinder Kits
Outboard Cylinders fit most large outboards. Standard side-mount cylinder is an affordable alternative to front mount cylinders. It's easy to install and can be installed in shallow splashwells and on engines fitted with power steering. Can be used with single or twin outboards. Extends about 13'' to the right of the motor tilt tube.
Part No: HC5342
90° Straight Splashwell Mounting Kit from TELEFLEX Home -> Engine Systems -> Steering Systems->Splashwell Mounting Kits
Add this kit to make the splashwell the point at which the pushpull cable is mounted. Ball and socket motion aligns the steering cable automatically. Corrosion-resistant. Includes threaded tube, splashwell guard and mounting hardware.
Part No: SA27254P
15° Bevel Splashwell Mounting Kit from TELEFLEX Home -> Engine Systems -> Steering Systems->Splashwell Mounting Kits
Add this kit to make the splashwell the point at which the pushpull cable is mounted. Ball and socket motion aligns the steering cable automatically. Corrosion-resistant. Includes threaded tube, splashwell guard and mounting hardware.
Part No: SA27253P
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12