Top Sellers
Stern Three-Mile LED Light from ATTWOOD
Energy-efficient three-mile 12" pole anchor/masthead and transom lights. Solid stainless hardware for corrosion resistance and unsurpassed polished appearance. Pole light is direct replacement for Perko 1181DPO CHR used on most Sea Ray boats. Case Material: Stainless steel . Mounting Hardware: Not included . Pole Diameter: 3/4" . Pole Material: Anodized aluminum . Draw: 0. 15A (1. 8W@12V DC) . Volts: 12V DC.
|
Scotch General Painting Masking Tape #2050 - 2" from 3M PRODUCTS
Use in a wide range of painting applicationsGeneral-purpose. Not for critical or extended outdoor use. Recommended Usage: General purpose masking or binding tape; adheres to previously painted or varnished surfaces . Material: Crepe paper with rubber resin adhesive . Removal Time: Three days .
|
Cetol Marine Light - Quart from INTERLUX
Enhances and protects the natural beauty of interior and exterior woodSemi-transparent finish prevents weathering and repels water. just wash wood thoroughly and apply. Three coats are recommended for the first application, followed by annual touchups. Marine Light is more translucent than Marine. If a gloss finish is desired, either may be overcoated with Marine Gloss. Quart. Long-lasting adhesion and protection from UV rays and weathering. Flexible, breathable, translucent finish; Quarts.
|
Black 3-Strand Nylon, 7/16'' Diameter, 5300lb. Breaking Strength from NEW ENGLAND ROPES
Dramatic resistance to damaging internal and external abrasion Combining premium nylon fiber with a high-quality marine coating and New England Ropes superior manufacturing processes produces line that is five times more abrasion-resistant wet than any other nylon line. You can actually feel this critical performance advantage when you handle the supple line. Stretch: 16% at 15% of breaking strength. *Approximately 10–15% less strength than White Premium Three-Strand Nylon.
|
Ultra Blue Three-Strand Line, 1/4" Dia., 1,700lb. Breaking Strength from SAMSON ROPE
Ultra-strong line outlasts polypro two to one Made from bi-polymer olefin fiber, ultra-strong Ultra Blue is 30%–35% stronger than polypropylene and has more than twice the wear life. UV light resistance is excellent, it is easy to grip and it floats.
|
|
|
Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .
|
Three Position Ignition Switch, OFF-Ignition-Start Functions from COLE HERSEE
Two position is for engines with a separate starter pushbutton. Three position: Off/Ignition/Start. Four position: Accessory/ Off/Ignition/Start or Off/Run/Push to Choke/Battery-Start (magneto switch). Brass construction, 2 keys supplied. 13/16" dia. mounting hole.
|
Striping Tape - Dark Blue, 3/4" from SEAFIT
Premium 2mil. thick vinyl striping tape makes it easy to add a colorful accent to your boat! Made from the same material used in quality custom boat graphics. It will not crack or peel, even in salt water, and the colors last from 5–7 years without fading. It can even be applied below the waterline. It can be bent, waved, and applied around corners. Should you change your mind or decide to update the look of your boat, simply remove the tape–no need to sand or ruin your paint or finish.
|
Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Haul and relaunch without loss of performance The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Can be applied over most paints in good condition. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). Type: Copolymer . 2% Cuprous Oxide . Additives: None .
|
Inflatable Boat Antifouling Paint from PETTIT
Water-based, multi-season ablative antifouling paint. For hard- or soft-bottom inflatables. Cleans up with water. Black. Quart. Type: Copolymer Ablative. Recommended Usage: PVC or Hypalon; trailered boats. Biocide: CuOx 41%. Additives: No. Compatibility: With all other antifouling paints in good condition except VC-17. Number of Coats Recommended: Two.
|
Cetol Marine Gloss Overcoat, Quart from SIKKENS
Bring out wood’s natural shine! Enhances and protects the natural beauty of interior and exterior wood. Semi-transparent finish prevents weathering and repels water. Easy to use—just wash wood thoroughly and apply. Three coats are recommended for the first application, followed by annual touchups. Apply by brush only—no sanding required. A fine orange-brown translucent finish is left—use alone or with Cetol overcoat. Coverage: 85 sq. Recommended Usage: Exterior and interior, above water .
|
#809 Notched Spreader from WEST SYSTEM
4'' x 4'' plastic spreader with 1/8'', 3/16'' and 1/4'' notches on three sides for quickly applying modified epoxy at a constant thickness.
|
Teak Care - Brightener, Quart from STARBRITE
Clean, brighten and protect your teak in three easy stepsBeautiful teak in three easy steps! Kit contains three pint-sized bottles, one each of Cleaner to remove stains and weathering; Brightener to highlight the natural grain and enhance color; and Oil to seal and protect wood from weather and UV damage. Individual, quart-sized bottles are also available. Cleaner chemically roots out stains, including ugly black mildew stains. Brightener restores teak's lustrous hue.
|
303 High Tech Fabric Guard, Pint from 303 PRODUCTS
Excellent protectant for Sunbrella upholstery and breathable foul weather gear The only repellency product recommended by and for Sunbrella. Restores lasting water repellency to marine canvas. Stops leaks and protects against soiling and water and oil-based stains. Resists mildew formation and UV sun damage. Spray on, let dry. One pint treats 75–100 square feet of marine canvas. Also a great choice for fabric upholstery, carpeting and breathable foul-weather gear.
|
|
Three Layer Breathable Bib Coveralls, Seafit Paint Three Layer Breathable Bib Coveralls
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->Three Layer Breathable Bib Coveralls
Three layers of polypropylene not only keep dust particles and liquids out, they also let cooling air in.
Part No: 68526
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->Three Layer Breathable Bib Coveralls
Three layers of polypropylene not only keep dust particles and liquids out, they also let cooling air in.
Part No: 68523
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->Three Layer Breathable Bib Coveralls
Three layers of polypropylene not only keep dust particles and liquids out, they also let cooling air in.
Part No: 68525
|
|
|