Easy On Bottom Coating from OCEAN ACCESSORIES LL
Why paint when you can wax? If your boating is in low fouling fresh water or cold saltwater, consider new waxing technology instead of anti-fouling bottom paint. An easy-to-use, nontoxic, soft-wax coating for full-season protection. One bottle will cover a 24' boat. Recommended Usage: Fresh or intermittent salt water use; lasts one full season . Clear, nontoxic alternative to bottom paints . Coverage: One pint covers 24' hull . Drying Time: Dries in minutes, overnight curing before launch .

Portable Bait Tank, 20 Gallons, 18.5"W x 18"H from KEEP ALIVE
Completely portable bait tanks feature a patented Oxygen Infusor aeration system that creates millions of micro bubbles to efficiently oxygenate water. Dark blue interiors reduce shadows on the tank wall, keeping fish calm and stress-free. Generous 13" lids close securely with twist-locks. Insulated models help maintain more consistent water temperature. 480gph infusor pump. Built-in water and air flow control valve. Non-slip carry handles . Easily connects to your battery .

7' Ugly Stik Combo, Saltwater Spinning; 4.6:1 Gear Ratio; Medium Action from SHAKESPEARE
Shakespeare's versatile Ugly Stik combos give the anger plenty of casting power to deliver bait to crafty and boat-wary fish. The two piece rods feature Fuji reel seats and EVA grips to maximize sensitivity and response to light strikes and the Shakespeare spinning reel sports stainless bearings, graphite frame, and aluminum spools for fast, smooth retrieval and reliable casts. Style: Saltwater Spinning . Target Species: Big Water/Light Tackle Targets . Rod Type: Conventional Ugly Stik .

84”L Fiberglass Bow from TAYLOR
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.

Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.

Water Spot Remover, 32 Oz. from DUCKY PRODUCTS
Specfically developed to remove hard water spots.

Standard Capacity Boji Water Softener, 5" x 24" from GENOVA PRODUCTS
Softens your water supply, yielding water that tastes fresher, is less corrosive to onboard plumbing and leaves fewer unsightly stains and water spots. Consists of a PVC cylinder containing a special Ion Exchange Resin that attracts hard substances in water (iron, calcium, etc. Complete kit includes the Boji Softener, a prefilter housing with activated carbon filter, 36" hose to connect Boji to prefilter, 3/4" hose fittings to plumb into water supply and molded integral feet.

Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.

Gen-Sep Water Separator, 2" Diameter, Gas In/Out 2.0", Water Outlet 1.5" from CENTEK INDUSTRIES
Position the water drain from the Gen-Sep just below the water line to eliminate water splash, especially important for nighttime operation. Gen-Sep will remove nearly all of the cooling water from the exhaust. That water can then be drained to a hull fitting just below the waterline, thus eliminating excess noise often created by splashing and pulsating water flow at the exhaust outlet. A slight downward angle is required for both the exhaust outlet and the exhaust gas tube. Dimensions: 10.

Antifreeze, -100 Engine & Water System - Gallon from SEAFIT
West Marine Pure Oceans -100° (-73°C) Marine Antifreeze provides the ultimate in extreme cold weather and corrosion protection for drinking water systems and all engines. Its premium additive package prevents corrosion of aluminum, copper, brass and solder, but will not harm rubber, seals or hose materials. Provides burst protection to -100°F (-73°C) and freeze protection within a range of -58°F to -63°F (-50°C to - 52°C).

TankWatch® 4 Water/Holding Tank Monitor from SEALAND
Reliable micro float switches activate empty, low, mid and full tank levels on the indicator panel. No electrical components contact water or waste. Easy to install using universal flange (sold separately). Includes cap with micro float switches . Indicator panel . Gasket and stainless mounting hardware . Adapts to fit any water or holding tank up to 22" . 45" adjustable probes available by Special Order .

10 Micron Diesel Fuel Filter/Water Separator with Metal Bowl from RACOR-PARKER FILTRAT
Racor’s Aquabloc filter media removes virtually 100% of water and solid contaminants. Filters have die-cast aluminum heads and come in different sizes for diesel engines and any rate of fuel flow. To be used on the suction side of the pump. See-thru bowls allow visual inspection for water; metal bowls are recommended for use in areas of high heat and are required by the US Coast Guard on inboard engines and gensets. Inlets/Outlets: 1/4" NPT female . Bowl Material: See-thru polymer .

Fuel Filter/Water Separator, 15/35gph Max. Flow, 6"H x 3.2"W x 3.2"D, Metal Bowl from RACOR-PARKER FILTRAT
Racor's famous Aquabloc® filter media separates water into the bottom of the drain bowl and ensures virtually 100% removal of water and solid contaminants. Filters come in different sizes for gasoline engines and any rate of fuel flow. Designed for use on the suction side of pump. All filters feature a die-cast aluminum head which is anodized and painted. Standard pipe-to-hose barbs are used for installation. Inlets/Outlets: 1/4" NPT, except 3/8" NPT on 660 series .

Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.

Replacement Pressure Switch from GROCO
Paragon Jr. Pressure Water System The Paragon Jr. can handle the demands of multiple outlets, either as a saltwater washdown or freshwater system pump. Includes a 12V bronze rotary pump, pressure gauge, strainer and PST-1 accumulator tank. Solid-state dry-tank shutoff Operates between 20 and 40psi For boats to 45' 7 GPM Draw: 30A starting, 26A running Self Prime: 6' Dimensions: 12"L x 7"H x 8"dia. (pump) 12"L x 8"dia.