Top Sellers
|
|
1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.
|
Spinnaker Pole Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. SWL from HARKEN
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
|
Marine Dry Lube from CRC MARINE
Superior dry lubrication for moving or stationary parts. Displaces moisture and inhibits corrosion. Fortified with PTFE to provide a micro-thin film that won’t attract dust or dirt. Dries in seconds. Will not stain sails or clothes. Great for mast track, genoa or traveler T-track, headsail grooves, hinges, zippers, headfoils, and sliders.
|
Hi-Load Ti-Lite Car, Torlon Bearings, 850lb. SWL from HARKEN
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
|
Spark Plug, BR6FIX from NGK SPARK PLUGS
Iridium-plated electrodes gives these plugs superior performanceIridium IX Spark Plugs are the most technologically advanced high performance plugs available. Featuring a 0. 6 mm iridium center electrode tip, they offer superior ignitability without sacrificing durability. The tapered ground electrode increases flame kernel expansion, while the superior heat range design is ideally suited to the demands of high performance environments.
|
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Fiberglass & Non-skid Deck Wax - Woody Wax, 16 oz from TOWER PLUS 2000
Create a non-stick wax finish for your boatAfter you apply this wax with a soft deck brush, dirt, soot, bird droppings and even fish blood rinse off easily. One application lasts up to two months and protects against corrosion, oxidation, water spots and the effects of the sun. 16oz. provides four applications for a 25' center console boat. Requires no rubbing or buffing. 16oz. 16oz.
|
Hour Tach Meter 1 or 2 Cylinder from DYER SPECIALTY
Hour Tach Meter Surface Mounted Inductive Meters provide what today's power-sports user need and expect from hour meters and hour tach meters. Knowing what to service and when, is the key to a successful preventative maintenance program for your motorcycle, ATV, PWC, Boat and Generator. Installation is easy with simple patented one wire hook-up. Encapsulated exopy case is water resistant. Hour Meter Track the Service Life of Your Vehicle - oil changes, valve, adjustments, spark plugs, etc. .
|
T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
|
Single Channel-Mate Glass Channel, 7/16"W from BECKSON MARINE
This window track is ideal for window glass or for installing sliding cabinet doors. Each channel groove is slightly (. 005") narrower than 1/4" window glass so there is positive pressure against the glass at all times. It seals out leaks and prevents glass from rattling. Made of B-FLEX marine plastic, it will not crack or discolor. The elevated slide at the bottom of the channel makes windows or doors easy to open and close. Sold in 8' lengths.
|
Folding Dock/Raft ladder 3 step from GARELICK
Unique flip-up hinge mechanismUnique hinged ladder flips up and out of the water to prevent marine growth. Features a 10° angle for effortless boarding. Quick-release pins make it easy to remove for storage. 16"W steps have anodized aluminum tread and a curved step to make boarding more comfortable. Overall ladder width is 18". One-year warranty. Wide track 18"W ladder with full width 16" steps. Anodized aluminum heavy-walled 1"dia. tube construction.
|
Fleece Fender Cover, Fits Fenders 10" x 26", Black from TAYLOR
Perfect for use with Big B and other center-tube style fenders, these 100% polyester fleece covers will provide posh protection for your boat! Made of rugged, 12-ounce Blizzard fleece, they are UV- light and tear-resistant. The draw string hem enables adjustment for a snug fit and also permits removal for washing.
|
Spark Plug, IZFR6K-11 from NGK SPARK PLUGS
Iridium-plated electrodes gives these plugs superior performanceIridium IX Spark Plugs are the most technologically advanced high performance plugs available. Featuring a 0. 6 mm iridium center electrode tip, they offer superior ignitability without sacrificing durability. The tapered ground electrode increases flame kernel expansion, while the superior heat range design is ideally suited to the demands of high performance environments.
|
3-IN-1 Boat Hook from SHURHOLD PRODUCTS
Convert your Shurhold pole to a paddle or boathookUse thse accessories with Shurhold's "one-pole-does-it-all system. Boat Hook has line-carrying feature, centered push-off and basic boat hook. Paddle features Shur-Lok quick-release adapter and is a great safety item for any boat.
|
|
Tigress Track Center Riggers, Tigress Trading Comp Tigress Track Center Riggers
|
|
Home -> Fishing -> Fishing Accessories->Tigress Track Center Riggers
A telescoping center rigger available in 8' with 1 1/8" OD base. Combine it with our clamp-on center rigger holder and our center rigger kit.
Part No: 88918
|
|
|
|
Home -> Fishing -> Fishing Accessories->Tigress Track Center Riggers
A telescoping center rigger available in 8' with 1 1/8" OD base. Combine it with our clamp-on center rigger holder and our center rigger kit.
Part No: 88916
|
|
|
|
Home -> Fishing -> Fishing Accessories->Tigress Track Center Riggers
A telescoping center rigger available in 8' with 1 1/8" OD base. Combine it with our clamp-on center rigger holder and our center rigger kit.
Part No: 88917
|
|
|
|
Home -> Fishing -> Fishing Accessories->Tigress Track Center Riggers
A telescoping center rigger available in 8' with 1 1/8" OD base. Combine it with our clamp-on center rigger holder and our center rigger kit.
Part No: 88914
|
|
|
|
Home -> Fishing -> Fishing Accessories->Tigress Track Center Riggers
A telescoping center rigger available in 8' with 1 1/8" OD base. Combine it with our clamp-on center rigger holder and our center rigger kit.
Part No: 88915
|
|
|