Top Sellers
Waste Caddy from TODD ENTERPRISES
Todd Waste Caddy A portable 29-gal. capacity waste removal system. Moves easily on pneumatic tires with plastic bearings. Features a vented cap and 10-foot, 1-1/2"dia. hose and gravity-assisted pump that forces out fluid by gravity for a more rapid transfer. Spring-loaded nozzle eliminates leaks . Bronze ball valve is located at the bottom of the tank . Constructed of cross-linked polyethylene for strength and durability .
|
Gas Caddy from TODD ENTERPRISES
Move 28 gallons of Gas in our smooth-rolling caddy Store and transport fuel safely on docks or onboard. Gas Caddy holds 28 gallons of fuel. Includes 10' of UL Approved hose with static wire, molded hose brackets, UL Approved spring loaded nozzle, 3/4" UL Approved ball valve, aluminum non sparking axle, pneumatic tires with nylon bearings, nylon wheel hubs, vented cap and a molded-in baffle for strength & durability. All Caddies bear the UN Marking, “UN3H1W. ” Color-coded red.
|
Gas Fill & Tank Vent - Black from PERKO
Perko Gas Fill and Tank Vent This ingenious plastic deck fill has a vent with a flame arrestor built right into the fill flange. A flip-up cap eliminates the need for a deck key and no ground wire is required.
|
Topside Fuel Tank, 3 Gallon, 18.13"L x 8.87"W x 9.87"H from MOELLER
Ideal for storage in transom wells and other small areas, these tanks hold their rated capacity and include reserve areas as well. Polyethylene construction with UV inhibitors meet all ABYC and USCG standards.
|
TankWatch® 4 Water/Holding Tank Monitor from SEALAND
Reliable micro float switches activate empty, low, mid and full tank levels on the indicator panel. No electrical components contact water or waste. Easy to install using universal flange (sold separately). Includes cap with micro float switches . Indicator panel . Gasket and stainless mounting hardware . Adapts to fit any water or holding tank up to 22" . 45" adjustable probes available by Special Order .
|
2-Tank System, 30/35” Gauge from HART SYSTEMS, INC.
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
|
12 Gallon Topside Fuel Tank from MOELLER
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 6"H.
|
|
|
OEM Replacement Fuel Tanks from MOELLER
The OEM’s (Original Equipment Manufacturer’s) choice in lightweight, non-corroding portable fuel tanks! Includes a universal 1/4" NPT fuel pickup adapter and fulfills all your large and small outboard engine needs. Approved for use in Japan, Australia and New Zealand, Canada, ISO and CSA Certified, UL Listed. 21. 25"L x 14"W x 9.
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
|
|
|
Replacement Cap with Gauge from MOELLER
Externally threaded cap fits Moeller tanks 031103, 031106, 031109, 031112, 031212. Scepter cap fits 4158, 4921, 3780 & 3781 tanks. Internal threaded cap fits 31612, 31615, 31515, 31818, 31620 & 31526 tanks.
|
Portable Bait Tank, 20 Gallons, 18.5"W x 18"H from KEEP ALIVE
Completely portable bait tanks feature a patented Oxygen Infusor aeration system that creates millions of micro bubbles to efficiently oxygenate water. Dark blue interiors reduce shadows on the tank wall, keeping fish calm and stress-free. Generous 13" lids close securely with twist-locks. Insulated models help maintain more consistent water temperature. 480gph infusor pump. Built-in water and air flow control valve. Non-slip carry handles . Easily connects to your battery .
|
|
|
Above Deck Tank Hold Down Kit from MOELLER
Includes two flexible 72" straps, two mounting blocks, two eye hooks and four stainless screws.
|
|
TODD ENTERPRISES Tank
|
|
Home -> Plumbing -> Marine Sanitation -> Treatment Sys/hldng Tnks->Holding Tanks
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
Part No: 85-1859WH
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Heavy Duty Holding Tanks
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
Part No: 93-2221
|
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Treatment Sys/hldng Tnks->Holding Tanks
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
Part No: 85-1667WH
|
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Heavy Duty Holding Tanks
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
Part No: 01-28WMH
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->V-Bottom Polyethylene Fuel Tanks
These rugged permanent tanks are molded of gray cross-linked polyethylene for strength and no-leak durability. Each tank is individually inspected and tested to assure its quality. Includes electronic fuel-level sending unit and fuel withdrawal fitting.
Part No: X90-2166
|
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Treatment Sys/hldng Tnks->Holding Tanks
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
Part No: 94-1627WH
|
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Treatment Sys/hldng Tnks->Holding Tanks
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
Part No: 85-1532WH
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->V-Bottom Polyethylene Fuel Tanks
These rugged permanent tanks are molded of gray cross-linked polyethylene for strength and no-leak durability. Each tank is individually inspected and tested to assure its quality. Includes electronic fuel-level sending unit and fuel withdrawal fitting.
Part No: X90-2165
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks
This kit enables you to seal existing ports in your Todd water tank and install new ones wherever you need them for your installation.
Part No: 90-2218
|
|
![Water Tank Straight Pipe-to-Hose Adapter Kit from TODD ENTERPRISES]( "Water Tank Straight Pipe-to-Hose Adapter Kit from TODD ENTERPRISES")
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks
Include all the fittings necessary to attach a water tank to the appropriate hoses (two 1/2" hose barbs and one 1 1/2" hose barb). All fittings screw into the tank; the opposite end of the fitting accepts the hose.
Part No: 93-2222
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Permanent Fuel Tanks
These rugged permanent tanks are molded of gray cross-linked polyethylene for strength and no-leak durability. Each tank is individually inspected and tested to assure its quality. Includes electronic fuel-level sending unit and fuel withdrawal fitting. . Meet NMMA and USCG non-commercial standards. Gas only.
Part No: X90-2177
|
|
![Water Tank 90°Pipe-to-Hose Adapter Kit from TODD ENTERPRISES]( "Water Tank 90°Pipe-to-Hose Adapter Kit from TODD ENTERPRISES")
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks
Kits include all fittings needed to attach hoses to a water tank. All fittings screw into the tank. The opposite end of the fitting accepts the hose. Teflon tape is supplied for easy installation and to ensure a tight fit. Two 1/2" hose barbs. One 1-1/2" hose barb.
Part No: 93-2223
|
|
|
