Welcome! Please Sign-In
Top Sellers
Black Anodized Track, 1-1/4" x 4', 5/16" FH Fasteners from SCHAEFER
Black Anodized Track, 1-1/4" x 4', 5/16" FH Fasteners from SCHAEFER
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Reefing Block with Bail, 1" x 1/8" Track, for Boats up to 30' from SCHAEFER
Reefing Block with Bail, 1" x 1/8" Track, for Boats up to 30' from SCHAEFER
For boats to 35'. Adjustable jiffy reefing slider with welded bail rides on boom-mounted track to provide proper dead-end attachment point location fore and aft. The block leads the line forward along the boom to a spar-mounted jam cleat.
Spring-Loaded Block, Fits 1" Track Size, 2" Sheave Dia., 7/16" Line Dia., Aluminum Cheeks, 1,750lb. SWL from SCHAEFER
Spring-Loaded Block, Fits 1" Track Size, 2" Sheave Dia., 7/16" Line Dia., Aluminum Cheeks, 1,750lb. SWL from SCHAEFER
Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45° to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38’. Bearings: Plain bearing. Shackle/Strap Type: 45° stand-up-spring shackle on T-Track slider. Configuration: Genoa lead block, 1" or 1-1/4" T-Track.
Midrail Cleat, Fits 1" x 1/8" Track, 1/4" Pin Dia., 1/2" Max. Line Size, 2500 SWL from SCHAEFER
Midrail Cleat, Fits 1" x 1/8" Track, 1/4" Pin Dia., 1/2" Max. Line Size, 2500 SWL from SCHAEFER
Reduce deck clutter, tie spring lines, fenders, dinghies, etc. onto this moveable, low-profile, heavy-duty cleat. The spring-loaded cleat fits on 1" and 1-1/4" T-track, so you can make quick and easy position changes without tools. Made of corrosion-resistant, polished, investment cast 316 stainless, this strong, adjustable cleat can also be used as a chock. To install, simply remove track end stop, slide on the cleat and lock into desired position.
Spring-Loaded Block, Fits 1" Track Size, 1-7/16" Sheave Dia., 7/16" Line Dia., Aluminum Cheeks, 1,000lb. SWL from SCHAEFER
Spring-Loaded Block, Fits 1" Track Size, 1-7/16" Sheave Dia., 7/16" Line Dia., Aluminum Cheeks, 1,000lb. SWL from SCHAEFER
Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45° to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38’. Bearings: Plain bearing. Shackle/Strap Type: 45° stand-up-spring shackle on T-Track slider. Configuration: Genoa lead block, 1" or 1-1/4" T-Track.
Spring-Loaded Block, Fits 1" Track Size, 2" Sheave Dia., 7/16" Line Dia., Stainless Cheeks, 2,750lb. SWL from SCHAEFER
Spring-Loaded Block, Fits 1" Track Size, 2" Sheave Dia., 7/16" Line Dia., Stainless Cheeks, 2,750lb. SWL from SCHAEFER
Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45° to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38’. Bearings: Plain bearing. Shackle/Strap Type: 45° stand-up-spring shackle on T-Track slider. Configuration: Genoa lead block, 1" or 1-1/4" T-Track.
Midrail Cleat, Fits 1-1/4" x 3/16" Track, 5/16" Pin Dia., 5/8" Max. Line Size, 4500 SWL from SCHAEFER
Midrail Cleat, Fits 1-1/4" x 3/16" Track, 5/16" Pin Dia., 5/8" Max. Line Size, 4500 SWL from SCHAEFER
Reduce deck clutter, tie spring lines, fenders, dinghies, etc. onto this moveable, low-profile, heavy-duty cleat. The spring-loaded cleat fits on 1" and 1-1/4" T-track, so you can make quick and easy position changes without tools. Made of corrosion-resistant, polished, investment cast 316 stainless, this strong, adjustable cleat can also be used as a chock. To install, simply remove track end stop, slide on the cleat and lock into desired position.
Stand-Up Spring Block on 3/4" T-Track Slider, Stainless Steel, 1,000lb. SWL from SCHAEFER
Stand-Up Spring Block on 3/4" T-Track Slider, Stainless Steel, 1,000lb. SWL from SCHAEFER
Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45° to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38’. Bearings: Plain bearing. Shackle/Strap Type: 45° stand-up-spring shackle on T-Track slider. Configuration: Genoa lead block, 1" or 1-1/4" T-Track.
Stainless-Steel Genoa Slide for 1-1/4" T-Track from SCHAEFER
Stainless-Steel Genoa Slide for 1-1/4" T-Track from SCHAEFER
Die-formed stainless steel, tumbled and polished. Spring pin stop. Includes polyethylene liners .
Stainless-Steel Genoa Slide for 1" T-Track from SCHAEFER
Stainless-Steel Genoa Slide for 1" T-Track from SCHAEFER
Die-formed stainless steel, tumbled and polished. Spring pin stop. Includes polyethylene liners .
Small Lazy Jack System, 24'-29' Boat Length, 8'0" Min., 10'0" Max. from SCHAEFER
Small Lazy Jack System, 24'-29' Boat Length, 8'0" Min., 10'0" Max. from SCHAEFER
Lazy Jacks control the mainsail when reefing or dousing, and easily tame today’s mainsails, whether full-battened or conventional type. Schaefer’s Lazy Jacks funnel the sail down to the boom and retain it, keeping you safe in the cockpit and allowing you to properly secure the sail when you are moored. Thimbled eyestraps attached to the bottom of your boom keep the hardware away from the cover and enable you to tuck your sailcover under the lazy jack control lines.
Large Lazy Jack System, 37’-48' Boat Length, 12'0" Min., 16'0" Max. from SCHAEFER
Large Lazy Jack System, 37’-48' Boat Length, 12'0" Min., 16'0" Max. from SCHAEFER
Lazy Jacks control the mainsail when reefing or dousing, and easily tame today’s mainsails, whether full-battened or conventional type. Schaefer’s Lazy Jacks funnel the sail down to the boom and retain it, keeping you safe in the cockpit and allowing you to properly secure the sail when you are moored. Thimbled eyestraps attached to the bottom of your boom keep the hardware away from the cover and enable you to tuck your sailcover under the lazy jack control lines.
Medium Lazy Jack System, 30'-36' Boat Length, 10'0" Min., 12'0" Max. from SCHAEFER
Medium Lazy Jack System, 30'-36' Boat Length, 10'0" Min., 12'0" Max. from SCHAEFER
Lazy Jacks control the mainsail when reefing or dousing, and easily tame today’s mainsails, whether full-battened or conventional type. Schaefer’s Lazy Jacks funnel the sail down to the boom and retain it, keeping you safe in the cockpit and allowing you to properly secure the sail when you are moored. Thimbled eyestraps attached to the bottom of your boom keep the hardware away from the cover and enable you to tuck your sailcover under the lazy jack control lines.
Genoa Track Slide, Fits 1-1/4" T-Track from RONSTAN
Genoa Track Slide, Fits 1-1/4" T-Track from RONSTAN
Tough plastic inserts allow Ronstan’s stainless steel genoa cars to move easily without scarring the track.
Flexible Track - 3'L, White from RECMAR PRODUCTS
Flexible Track - 3'L, White from RECMAR PRODUCTS
Hang drapery and beautify your cabin in a “snap” with this durable, flexible polyvinylchloride (PVC) system. Purchase one track section and one package each of snap carriers, snap tape, and end caps for every three feet of drapery. Safeguard makes a variety of curtains.

track schaefer

Black Anodized Track, 1-1/4" x 10', 5/16" FH Fasteners from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-80
Slider, Fits 1" x 1/8" Track from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->T-Track Sliders with Universal Adapters
Stainless T-track sliders use unique captive liners of “slippery” polyethylene to practically eliminate friction, and reduce breakage common to competitive designs with protruding ends.
Part No: 504-73
Black Anodized Track, 1" x 2', 1/4" FH Fasteners from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-62
Black Anodized Track, 1-1/4" x 8', 5/16" FH Fasteners from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-78
Black Anodized Track, 1" x 10', 1/4" FH Fasteners from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-70
Black Anodized Track, 1" x 4', 1/4" FH Fasteners from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-64
Black Anodized Track, 1" x 8', 1/4" FH Fasteners from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-68
Slider, Fits 1-1/4" x 3/16" Track from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->T-Track Sliders with Universal Adapters
Stainless T-track sliders use unique captive liners of “slippery” polyethylene to practically eliminate friction, and reduce breakage common to competitive designs with protruding ends.
Part No: 704-73
Black Anodized Track, 1-1/8” x 4', FH Fasteners from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-64
Clear Anodized Track, 1-1/4" x 6', 5/16" FH Fasteners from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-76-C
Clear Anodized Track, 1" x 2', 1/4" FH Fasteners from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-62-C
Clear Anodized Track, 1-1/4" x 2', 5/16" FH Fasteners from SCHAEFER Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-72-C
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12