HD 5,000lb. Drop-Leg Trailer Jack from FULTON
HD 5,000lb. Drop-Leg Trailer Jack Heavy-duty fixed-mount with a 5,000lb. capacity and a corrosion-resistant zinc finish.

Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.

Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.

Dyform Wire - 6MM 1X19, 7810BL from NAVTEC
Control your rig and sail plan more accurately with a low-stretch, high-performance wire strand. Dyform is an essential performance requirement on many racing sailboats and on cruising yachts seeking higher performance and greater margins of safety. It has 30% greater breaking strength and 25% less stretch than conventional wire strand. Wire strands are specially shaped to fill more cross sectional area for greater resistance to elastic stretch. Same corrosion resistance of 316S31 stainless.

Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Easy to remove for trailering In winds as light as 2/10th knots the sapphire suspension bearing allows the Windex to seek wind direction. No other wind vane in the world is as sensitive to extreme light air and small puffs, or as responsive when the breeze picks up. For small boats and dinghies. Includes a 10" vane, adjustable tacking tabs and glass reinforced polycarbonate J-Base for side, top or front of mast mounting. Stands only 9. 25" tall and weighs 1.

Wiretec 405 Sparkplug Wire Set from WIRE TEC (MAGSTAR)
WIRETEC 405 SPARKPLUG WIRE.

Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
European style Series 170 side navigational lights are certified for use on powerboats and sailboats up to 20m (or 65. 6') with 12V electrical systems. Red or green lenses with 12V bulbs included. 2nm visibility range. Case Material: Chrome-plated brass tops with black plastic bases . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 97A . Replacement Bulb: Model 8646853 .

Halyard Kit, 1/8" Wire Dia., 3/8" Line Dia., 40' Wire Length, 40' Line Length from WEST MARINE RIGGING
Convenient, do-it-yourself kits offer an economical way to replace old halyards We offer these kits for those who want to replace their old halyards or install new low-stretch halyards. Made of the highest quality 7x19 oil-free stainless wire and New England Ropes premium white Sta-Set yacht braid. Comes with a Flemish eye at the rope end, and a thimble and sleeve, but no shackle. Rope Type: Sta-Set Yacht Braid . Shackle: Flemish eye splice, sleeve and thimble, no shackle .

RailLight™ Clamp-On Solar-Powered Light from SIMPLY BRILLIANT
Solar-Powered Sol Lights™ RailLight™ charges all day and shines all night! Clamp this solar-powered portable light to any railing, coaming, stanchion, step, ladder or dock box for up to eight hours of light with just an eight hour charge of sunlight. Coated stainless steel finish resists corrosion. Comes with two clamps: one for round railings up to 1-1/4", and a transom clamp for up to 2" thickness. Dual 700mA rechargeable and replaceable NiCad batteries.

Stern Three-Mile LED Light from ATTWOOD
Energy-efficient three-mile 12" pole anchor/masthead and transom lights. Solid stainless hardware for corrosion resistance and unsurpassed polished appearance. Pole light is direct replacement for Perko 1181DPO CHR used on most Sea Ray boats. Case Material: Stainless steel . Mounting Hardware: Not included . Pole Diameter: 3/4" . Pole Material: Anodized aluminum . Draw: 0. 15A (1. 8W@12V DC) . Volts: 12V DC.

Twisted Pair Wire with Shield from ANCOR MARINE
Similar to Ancor duplex wire, except that the conductors are twisted and surrounded by a copper shield for extra protection against noise and electrical interference. Red/black conductors. Recommended by ABYC for DC wiring near compasses and other magnetically - sensitive devices. Sold per foot. Wire Type: Twisted Pair . Construction: Tinned Copper . Conductors (Color and # of): 1 Red, 1 Black . Color of Exterior Insulation: White . Shielding: Copper Shield . Approvals: UL, ABYC, CSA .

Series 250 Exhaust Hose, 2-3/8"ID, 2-3/4"OD, 230psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .

Bluefever Wire Max Glove, L from AFTCO
Aftco Bluefever Wire Max Leadering Glove This glove is designed using the expertise of Peter B. Wright, world famous big game skipper and author. Closed cell EVA foam covered with super tough Armortex® wraps hand and lines palm, fingers and thumb to maximize protection when handling mono, wire or cable leaders. Durable Tacky-Grip palm and Spandura® forchettes. Foam-backed mesh keeps fingers cool and protected. Wrap-around neoprene strap. Velcro® closure over woven cuff .

Series 250 Exhaust Hose, 7/8"ID, 1-3/16"OD, 565psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .

Inflatable Boat Antifouling Paint from PETTIT
Water-based, multi-season ablative antifouling paint. For hard- or soft-bottom inflatables. Cleans up with water. Black. Quart. Type: Copolymer Ablative. Recommended Usage: PVC or Hypalon; trailered boats. Biocide: CuOx 41%. Additives: No. Compatibility: With all other antifouling paints in good condition except VC-17. Number of Coats Recommended: Two.