HD 5,000lb. Drop-Leg Trailer Jack from FULTON
HD 5,000lb. Drop-Leg Trailer Jack Heavy-duty fixed-mount with a 5,000lb. capacity and a corrosion-resistant zinc finish.

Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.

Inflatable Boat Antifouling Paint from PETTIT
Water-based, multi-season ablative antifouling paint. For hard- or soft-bottom inflatables. Cleans up with water. Black. Quart. Type: Copolymer Ablative. Recommended Usage: PVC or Hypalon; trailered boats. Biocide: CuOx 41%. Additives: No. Compatibility: With all other antifouling paints in good condition except VC-17. Number of Coats Recommended: Two.

Engine Winterizing Kit from WEST MARINE
Winterize your outboard or sterndrive with this convenient kitUses your existing flusher and a garden hose to winterize your outboard or sterndrive engine, even while it’s on the trailer. Kit includes a five-gallon jug, hose fittings and instructions for winterizing. You supply five gallons of nontoxic antifreeze for each engine. Complete instructions are included.

Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Easy to remove for trailering In winds as light as 2/10th knots the sapphire suspension bearing allows the Windex to seek wind direction. No other wind vane in the world is as sensitive to extreme light air and small puffs, or as responsive when the breeze picks up. For small boats and dinghies. Includes a 10" vane, adjustable tacking tabs and glass reinforced polycarbonate J-Base for side, top or front of mast mounting. Stands only 9. 25" tall and weighs 1.

Arrow Style Windvane from RONSTAN
Small boat wind indicators feature quality construction at a fraction of the price of other windvanes, so they are a great choice for junior sailors who might be rough on the equipment. Ronstan's new vanes are balanced for accuracy and molded in UV-stabilized nylon. The aluminum shaft can be removed from the mast bracket for trailering or security. Both the Pennant and Arrow style indicators include adjustable tacking angle arrows.

Transom Adapter for Bracket from FULTON
Lets you remove your outboard bracket and outboard for security and less stress and fatigue on the transom while trailering. A locking device helps theft-proof motor and bracket. Heavy-duty marine-grade aluminum with stainless steel mounting bolts supplied. For Adjustable Brackets above (Models 380321 & 389866).

Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.

Trailer Wheel Bearing Grease from WEST MARINE
Protects bearings against salt air, saltwater and atmospheric chemical corrosion. For wheel bearings (including disc brake wheel bearings), swivel hinges, pins, winches and anchor chain reels. Lubricates and protects bearings. Great for wheel bearings, swivel hinges, pins, and winches. Avaialble in two 3oz. cartridges, 14oz. cartridge, 1lb. can or 5. 2oz.

Screen for Nibo 1070-10A Hatch from BOMAR
With these spare parts for your Nibo or Gray hatch, you can replace worn or damaged parts for a fraction of the cost of replacing the hatch. Low-Profile Gasket in a 9' length. 9/16" Gasket in a 10' length. Available for the 100 series: Riser Arm Male Hatch Knob Female Hatch Knob. Hatch Tiedown Dog. Left-Locking Quick Dog.

100' Anchor Rode from MARINETECH PRODUCTS
These super flexible nylon anchor lines are designed for trailerable watercraft up to 26'.

Transom Drain Tube & Plug from MOELLER
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.

Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.

Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Haul and relaunch without loss of performance The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Can be applied over most paints in good condition. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). Type: Copolymer . 2% Cuprous Oxide . Additives: None .

T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.