Top Sellers
HD 5,000lb. Drop-Leg Trailer Jack from FULTON
HD 5,000lb. Drop-Leg Trailer Jack Heavy-duty fixed-mount with a 5,000lb. capacity and a corrosion-resistant zinc finish.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Inflatable Boat Antifouling Paint from PETTIT
Water-based, multi-season ablative antifouling paint. For hard- or soft-bottom inflatables. Cleans up with water. Black. Quart. Type: Copolymer Ablative. Recommended Usage: PVC or Hypalon; trailered boats. Biocide: CuOx 41%. Additives: No. Compatibility: With all other antifouling paints in good condition except VC-17. Number of Coats Recommended: Two.
|
Engine Winterizing Kit from WEST MARINE
Winterize your outboard or sterndrive with this convenient kitUses your existing flusher and a garden hose to winterize your outboard or sterndrive engine, even while it’s on the trailer. Kit includes a five-gallon jug, hose fittings and instructions for winterizing. You supply five gallons of nontoxic antifreeze for each engine. Complete instructions are included.
|
Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Easy to remove for trailering In winds as light as 2/10th knots the sapphire suspension bearing allows the Windex to seek wind direction. No other wind vane in the world is as sensitive to extreme light air and small puffs, or as responsive when the breeze picks up. For small boats and dinghies. Includes a 10" vane, adjustable tacking tabs and glass reinforced polycarbonate J-Base for side, top or front of mast mounting. Stands only 9. 25" tall and weighs 1.
|
Arrow Style Windvane from RONSTAN
Small boat wind indicators feature quality construction at a fraction of the price of other windvanes, so they are a great choice for junior sailors who might be rough on the equipment. Ronstan's new vanes are balanced for accuracy and molded in UV-stabilized nylon. The aluminum shaft can be removed from the mast bracket for trailering or security. Both the Pennant and Arrow style indicators include adjustable tacking angle arrows.
|
Transom Adapter for Bracket from FULTON
Lets you remove your outboard bracket and outboard for security and less stress and fatigue on the transom while trailering. A locking device helps theft-proof motor and bracket. Heavy-duty marine-grade aluminum with stainless steel mounting bolts supplied. For Adjustable Brackets above (Models 380321 & 389866).
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
Trailer Wheel Bearing Grease from WEST MARINE
Protects bearings against salt air, saltwater and atmospheric chemical corrosion. For wheel bearings (including disc brake wheel bearings), swivel hinges, pins, winches and anchor chain reels. Lubricates and protects bearings. Great for wheel bearings, swivel hinges, pins, and winches. Avaialble in two 3oz. cartridges, 14oz. cartridge, 1lb. can or 5. 2oz.
|
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
|
100' Anchor Rode from MARINETECH PRODUCTS
These super flexible nylon anchor lines are designed for trailerable watercraft up to 26'.
|
Transom Drain Tube & Plug from MOELLER
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.
|
Spc Stripe Tape, 2'' Blue from SEAFIT
The easy way to add excitement to your boatAdd these stripes for a vibrant dose of color. A top carrier holds the stripes in alignment during application, ensuring flawless results.
|
Spc Stripe Tape, 2'' Black from SEAFIT
The easy way to add excitement to your boatAdd these stripes for a vibrant dose of color. A top carrier holds the stripes in alignment during application, ensuring flawless results.
|
Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Haul and relaunch without loss of performance The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Can be applied over most paints in good condition. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). Type: Copolymer . 2% Cuprous Oxide . Additives: None .
|
|
Trailering Trailers, Carriers
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Trailering Clips
Clip onto the extended ram of the outdrive tilt cylinder to take the pressure off while trailering. OMC fits all Cobra Sterndrives. Mercruiser fits AlphaOne/Gen II and Bravo. Sold in pairs.
Part No: 18-9099
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support->Trailering Clips
Clip onto the extended ram of the outdrive tilt cylinder to take the pressure off while trailering. OMC fits all Cobra Sterndrives. Mercruiser fits AlphaOne/Gen II and Bravo. Sold in pairs.
Part No: 18-9098
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Replacement Trailer Springs
Heavy duty steel with 9/16"ID nylon bushings. All are slipper type, except the double eye springs.
Part No: 81198
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Wheels & Tires
Heavy duty steel carrier attaches to trailer frames up to 4"H x 3"W. Includes a 5-stud, pre-greased hub with 1 3/8" x 1 1/16" bearings. . Mounts both the hub and a spare tire.
Part No: 86079
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers
Shipshape’s Universal Trailer ships to your door by common carrier and is designed for easy assembly using common tools. Includes everything you need to carry a small boat, inflatable or PWC up to about 12'L. Galvanized steel frame is built strong and has an ample 800 pound capacity. DOT approved lights. 4' adjustable carpeted bunk boards with dual supports. Wnch stand. Winch with strap. 4. 80x8 tires. 1-7/8" hitch coupler with safety chains. Total overall length 140".
Part No: 48815
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Trailer Brakes/Axles
Simply attach the switch to your trailer brake actuator and wire to the reverse light of the towing vehicle. Allows your trailer to freewheel when backing up, so you won’t have to get out to flip switches.
Part No: 81103
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Wheels & Tires
Trailer Keeper foils would-be trailer thieves by temporarily disabling one trailer wheel. Unique Lug Latch fits single, tandem and tri-axle trailers and wheels with 4, 5, or 6 lugs. Hardened, heavy-gauge steel. Easy to use. Simple installation requires no cutting or drilling.
Part No: TK100 0100
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers
Hot-dipped galvanized steel carrier mounts to frame or tongue. Adjusts for frames up to 4"H x 3"W. Holds 4- or 5-lug wheels. Includes two sizes of U-bolts and all needed hardware.
Part No: 27310G
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers
Features Fulton’s Galva-Tec finish and a security hole to allow attachment of a cable lock. Fits both 4- and 5-lug wheels and trailer tongues to 3"W x 4"H.
Part No: STC1000101
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support
Designed for both boat lifts and trailers, this guide on features a special two-piece bracket for I-beam mounting. Bolts included to fit up to 4"W I-beam.
Part No: 27635
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Wheels & Tires
Seamless steel tubing with Galva-Tec finish exceeds industry standards for corrosion protection. Fits trailer wheels to 16 1/2", trailer tongues to 3"W x 5"H. Provides 4 3/4" of lift and 7" of offset to hold tire up and out of the way.
Part No: HDSTC 0101
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers
Tire Carriers That Don't Spare Security or Style Designed to hold the marine trailer industry's increasingly larger wheels and newer lug configurations, Fulton F2 Tire Carriers have the strength and styling to enhance any trailer frame. One piece steel construction. All mounting hardware included. Supports cable lock (not included). Resists corrosion with superior plating.
Part No: 581902
|
|
|