Flip Lock Drain Plug 1" Stainless from SEAFIT DRAIN
Standard rubber and brass plug fits 1" transom drains on many production boats.

1'' Transom Drain W/Plug from BECKSON MARINE INC
All-nylon drain and plug with a plastic retainer and O-ring.

Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.

Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Marine lower unit drain, flush and fill tool. Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefishier lower units. Quick, easy and clean way to change marine lower unit gear lube. For use with all 8- and 10-oz.

Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.

Tubing-Alu 7/8X20' from WEST MARINE
Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has . 049" wall thickness . Aluminum has . 058" wall thickness . Use 7/8" tubing for smaller powerboats . Use 1" tubing for sailboats and larger powerboats . Available in 6', 12' and 20' lengths .

Rule 500GPH Transom Mount Bait Pump from RULE INDUSTRIES
Transom mounted aerator pumps provide your livewell to have professional aeration without needing to install a pump through your hull. The unique quick-release pump with strainer base assembly snaps easily into the provided transom bracket. At the end of the day, the pump can be removed from storage. Each pump features 6' wire leads. No need to install a pump through the hull. Unique, quick-release pumps with strainer base assembly easily snap into the transom bracket (included).

2'' Trnsm Ladder Extension Shim from GARELICK
Extends ladder farther off the transom. Use with spacer and face plate included with ladder.

Fold-Down Transom Ladder from GARELICK
Great for boats with small transoms. Includes a unique bracket for attaching to most angled or curved transoms in an area only 12"W x 6. 5"H. Both steps fold down for boarding.

1-1/2" Elbow Drain, Screened from MARINE EAST
Flush head fits most standard showers and allows complete drainage, decreasing the likelihood of clogging.

Transom Adapter for Bracket from FULTON
Lets you remove your outboard bracket and outboard for security and less stress and fatigue on the transom while trailering. A locking device helps theft-proof motor and bracket. Heavy-duty marine-grade aluminum with stainless steel mounting bolts supplied. For Adjustable Brackets above (Models 380321 & 389866).

Drill Pump Kit from JABSCO
The self-priming drill pump chucks into a standard 1/4" drill motor and pumps up to 3 1/2gpm. Kit includes all items needed for draining engine oil through the dipstick tube. Includes 3' of 1/2" hose, probe adapter and 40"L x 1/4"dia.

Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.

Drain Fitting, 1-1/4" Straight, 3/4" Hose, Plastic. from FORESPAR
1-1/4" Straight, 3/4" Hose, Plastic.

Little Pal Pump Kit from JABSCO
Handles many liquid draining and transfer jobs, yet is small enough for a tool or tacklebox. Includes 2" hose and draw tube for draining oil through dipstick tube.