SaniPottie® Portable Head Hold-Down Brackets from SEALAND
Hold-down brackets keep SaniPottie safely in place.

Potable Water Holding Tank, 3 Gal. from TODD ENTERPRISES
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.

TankWatch® 4 Water/Holding Tank Monitor from SEALAND
Reliable micro float switches activate empty, low, mid and full tank levels on the indicator panel. No electrical components contact water or waste. Easy to install using universal flange (sold separately). Includes cap with micro float switches . Indicator panel . Gasket and stainless mounting hardware . Adapts to fit any water or holding tank up to 22" . 45" adjustable probes available by Special Order .

Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .

Kayaker's Fishing Toolbar from CONFLUENCE HOLDINGS
It's a fisherman's utility belt for your kayakUnique, pre-slotted attachment bar allows you to mount a variety of accessories including rod holders, fishfinders, compasses, GPS units or lights securely to your kayak without having to mount them permanently. Features nylon straps for attaching to most standard deck loops, making it easy set up or remove. It adjusts to fit almost any kayak and can be cut down to match the width of narrower singles. Rubber feet protect and stick to decks.

Fold-Down Transom Ladder from GARELICK
Great for boats with small transoms. Includes a unique bracket for attaching to most angled or curved transoms in an area only 12"W x 6. 5"H. Both steps fold down for boarding.

Above Deck Tank Hold Down Kit from MOELLER
Includes two flexible 72" straps, two mounting blocks, two eye hooks and four stainless screws.

Holding Clips, 1/4" from BECKSON MARINE INC
Heavy-duty, nonmagnetic, noncorroding clips. Require four #8 FHWS fasteners.

C-Strobe Personal Strobe Light from ACR ELECTRONICS
This waterproof, corrosion-resistant PFD light delivers more than eight hours of intense one-second interval flashes on two AA alkaline or 1. 5V lithium batteries (not included). Waterproof (to 10'), corrosion- impact- and temperature- resistant ABS case Twist "ON-OFF" control can be operated by gloved hands and in adverse conditions Slim, lightweight design. Comes with an adjustabe Velcro® strap and wrist loop Meets USCG (161. Flash rate: 60 ± 10 flashes per minute nominal.

Pair of Wrap Pins for 1/4" Turnbuckle from C SHERMAN JOHNSON
Wrap pins are Velcro locking devices used to secure turnbuckles without having to bend over the end of the cotter pins.

Removable Chafe Gear Wrap, 4', for 3/4"– 7/8" Line from MEGAFEND
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.

Manual Oil Change Pump from WEST MARINE
"We don’t know anyone who looks forward to changing engine oil, but this pump should make the job a little easier. The handle makes it easy to carry the goo to a harbor recycling location or your local gas station that accepts used oil. Your engine will appreciate it!" Improved durability and capable of inflating high-pressure This value-priced oil changer makes changing oil a snap! Simply place the transfer probe down the dipstick tube and start pumping.

Wincher, 2.25IN TO 2.75IN from WATSKI
Winchers are rubber disks that fit over the top of your non-self-tailing winches to make them perform like self-tailers. Loading up the winch drums until the line contacts the underside of the Wincher creates friction which allows the line to self-tail. A rope groove holds line reasonably securely around the top of the winch. Practical Sailor Magazine suggests Winchers for halyard winches, but not sheet winches, although we have many comments from customers who swear by them.

Snap-On Cable Cover, 1/4" Wire Dia. from DAVIS INSTRUMENTS
White vinyl cable covers in 6' lengths. Tubes split down length and install in seconds.

Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.