Welcome! Please Sign-In
Top Sellers
Brass Male Pipe-to-Hose, NPT, 1/8" - 5/16" from PLUMBING FITTINGS
Standard Capacity Boji Water Softener, 5" x 24" from GENOVA PRODUCTS
Standard Capacity Boji Water Softener, 5" x 24" from GENOVA PRODUCTS
Softens your water supply, yielding water that tastes fresher, is less corrosive to onboard plumbing and leaves fewer unsightly stains and water spots. Consists of a PVC cylinder containing a special Ion Exchange Resin that attracts hard substances in water (iron, calcium, etc. Complete kit includes the Boji Softener, a prefilter housing with activated carbon filter, 36" hose to connect Boji to prefilter, 3/4" hose fittings to plumb into water supply and molded integral feet.
Whale-X 15mm Tubing, Blue (sold per foot) from WHALE PUMPS
Whale-X 15mm Tubing, Blue (sold per foot) from WHALE PUMPS
Just cut the tubing to length and fully push the end into the appropriate fitting. The collet automatically secures the hose. If you ever need to alter the system, the connections can be disassembled and reused. All components are manufactured from nontoxic, food-grade materials and are designed to allow unrestricted flow. To gain the advantages of the Whale system, it is not necessary to replumb your entire boat, as unique adapters enable connection to most boat’s existing plumbing systems.
Adapter—3/4" BSP Female to 15mm (Qty. 2) from WHALE PUMPS
Adapter—3/4" BSP Female to 15mm (Qty. 2) from WHALE PUMPS
Just cut the tubing to length and fully push the end into the appropriate fitting. The collet automatically secures the hose. If you ever need to alter the system, the connections can be disassembled and reused. All components are manufactured from nontoxic, food-grade materials and are designed to allow unrestricted flow. To gain the advantages of the Whale system, it is not necessary to replumb your entire boat, as unique adapters enable connection to most boat’s existing plumbing systems.
Quiet-Flush Electric Head Service Kit from JABSCO
Quiet-Flush Electric Head Service Kit from JABSCO
Replacement and Service Parts We stock an extensive selection of parts and service kits for virtually all plumbing products. In addition, we can quickly get any part you need to repair your Jabsco, SHURflo, Raritan or Groco equipment directly from the manufacturer through our Special Order department. If you know the part number you need simply order the part using the Model or manufacturer's part number. If you don't know either number, please call us for assistance.
Bronze Threaded Nipple, 3/4" Pipe, Close Length from GROCO
Quick Connect Tank Fitting Assembly from WHALE PUMPS
Quick Connect Tank Fitting Assembly from WHALE PUMPS
Just cut the tubing to length and fully push the end into the appropriate fitting. The collet automatically secures the hose. If you ever need to alter the system, the connections can be disassembled and reused. All components are manufactured from nontoxic, food-grade materials and are designed to allow unrestricted flow. To gain the advantages of the Whale system, it is not necessary to replumb your entire boat, as unique adapters enable connection to most boat’s existing plumbing systems.
84”L Fiberglass Bow from TAYLOR
84”L Fiberglass Bow from TAYLOR
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.
Tubing-Alu 7/8X20' from WEST MARINE
Tubing-Alu 7/8X20' from WEST MARINE
Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has . 049" wall thickness . Aluminum has . 058" wall thickness . Use 7/8" tubing for smaller powerboats . Use 1" tubing for sailboats and larger powerboats . Available in 6', 12' and 20' lengths .
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
Portable Bait Tank, 20 Gallons, 18.5"W x 18"H from KEEP ALIVE
Portable Bait Tank, 20 Gallons, 18.5"W x 18"H from KEEP ALIVE
Completely portable bait tanks feature a patented Oxygen Infusor aeration system that creates millions of micro bubbles to efficiently oxygenate water. Dark blue interiors reduce shadows on the tank wall, keeping fish calm and stress-free. Generous 13" lids close securely with twist-locks. Insulated models help maintain more consistent water temperature. 480gph infusor pump. Built-in water and air flow control valve. Non-slip carry handles . Easily connects to your battery .
Bait Tank Plumbing Kit from KODIAC
Bait Tank Plumbing Kit from KODIAC
Includes exclusive non-clog drain screen and instructions on how to build three different types of tanks.
Quiet Flush Electric Head, Compact Size Bowl, 12V from JABSCO
Quiet Flush Electric Head, Compact Size Bowl, 12V from JABSCO
The Quiet Flush head features a very quiet flush cycle just like your household toilet. Incorporates a powerful waste water evacuation pump with built-in macerator. Select normal flush or bowl-fill/bowl-empty flush. Water control solenoid valve with anti-siphon breaker to prevent contamination of potable water supply. Includes 6' hose for connecting to the remote mounted solenoid valve and a siphon-breaker assembly. Port Sizes: 3/4" Hose Barb intake, 1" Hose Barb discharge.
Folding Dock/Raft ladder 3 step from GARELICK
Folding Dock/Raft ladder 3 step from GARELICK
Unique flip-up hinge mechanismUnique hinged ladder flips up and out of the water to prevent marine growth. Features a 10° angle for effortless boarding. Quick-release pins make it easy to remove for storage. 16"W steps have anodized aluminum tread and a curved step to make boarding more comfortable. Overall ladder width is 18". One-year warranty. Wide track 18"W ladder with full width 16" steps. Anodized aluminum heavy-walled 1"dia. tube construction.
12-Cup 12V Coffee Maker from WARING
12-Cup 12V Coffee Maker from WARING
Plug this coffee maker into any 12-volt outlet and enjoy great-tasting coffee wherever you go. Outstanding features include a 12-cup, double-walled, brushed stainless steel carafe that keeps coffee hot for hours; and a convenient “Brew Pause” feature that lets you pour a cup of coffee mid-cycle, without drips or spills. Includes auto-shut off, easy-fill, reservoir with magnified level indicator and a convenient brew-through, pour-through, hands-free lid that seals air out and keeps flavor in.

Wall Plumbing

Discharge Pump Wall, #CH120 from RARITAN Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
Raritan CH120 Crown Head II Discharge Pump Wall.
Part No: CH120
Siphon Tubing, 3/16 ID x 5/16 OD x 1/16 Wall, Clear PVC, #CH37 from RARITAN Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
TUBING.
Part No: CH37
Series 162 PVC Tubing, 3/4"ID, 31/32"OD from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 162 Polyester Reinforced Clear PVC Tubing
Heavy-walled, FDA-approved compound vinyl hose. Nontoxic, tasteless, odorless. Polyester braid-reinforced. Temp range: 25°–150°F. For use in hot or cold pressure water systems (burst pressure is 250lb. ), vent and drain lines, bilge pump discharge. Sold per foot; 50' max continuous length. Meets NSF-61 requirements. Application: Pressurized water system supply, drain lines, head intake, washdown pumps. Material: FDA formula vinyl. Reinforcement: Polyester braid.
Part No: 116-162-0346
28-Gallon Holding Tank System from SEALAND Home -> Plumbing -> Marine Sanitation -> Treatment Sys/hldng Tnks
This complete system combines SeaLand’s TankWatch® 4 level indicator, SaniGard® vent filter, 12V SaniPump® discharge pump and TankSaver® vacuum relief valve in one package. It features separate ports for overboard and dockside discharge. The vent filter includes a cartridge that contains odor removing media, lasts one boating season and is easily replaced. The vacuum relief valve protects the tank from excessive suction by dockside pumps. Material: Polyethelyne . Wall: 5/8" . 5 gal.
Part No: 322012812
Series 162 PVC Tubing, 1/2"ID, 23/32"OD from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 162 Polyester Reinforced Clear PVC Tubing
Heavy-walled, FDA-approved compound vinyl hose. Nontoxic, tasteless, odorless. Polyester braid-reinforced. Temp range: 25°–150°F. For use in hot or cold pressure water systems (burst pressure is 250lb. ), vent and drain lines, bilge pump discharge. Sold per foot; 50' max continuous length. Meets NSF-61 requirements. Application: Pressurized water system supply, drain lines, head intake, washdown pumps. Material: FDA formula vinyl. Reinforcement: Polyester braid.
Part No: 116-162-0126
Series 162 PVC Tubing, 5/8"ID, 27/32"OD from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 162 Polyester Reinforced Clear PVC Tubing
Heavy-walled, FDA-approved compound vinyl hose. Nontoxic, tasteless, odorless. Polyester braid-reinforced. Temp range: 25°–150°F. For use in hot or cold pressure water systems (burst pressure is 250lb. ), vent and drain lines, bilge pump discharge. Sold per foot; 50' max continuous length. Meets NSF-61 requirements. Application: Pressurized water system supply, drain lines, head intake, washdown pumps. Material: FDA formula vinyl. Reinforcement: Polyester braid.
Part No: 116-162-0586
Holding Tank Fitting Kit from TODD ENTERPRISES Home -> Plumbing -> Marine Sanitation->Heavy Duty Holding Tanks
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
Part No: 93-2221
SensaTank Marine 100 Tank Monitoring Kit from JOHNSON PUMPS Home -> Plumbing -> Marine Sanitation
System uses our patented digital Mirus detector cells to accurately measure and display fluid levels inside grey, fresh and black water holding tanks. Sensors measure the fluid levels through any non-metallic tank wall by using a unique low impedance differential electrical field. Sensors avoid the common problem of misreading debris buildup on the inside tank wall that affects all capacitive sensor based systems. No calibration required. "Peel and Stick" sensors. Panel: 3.
Part No: 200600032
Heavy Duty Holding Tank, 18 Gal. from TODD ENTERPRISES Home -> Plumbing -> Marine Sanitation->Heavy Duty Holding Tanks
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
Part No: 01-18WMH
Heavy Duty Holding Tank, 24 Gal. from TODD ENTERPRISES Home -> Plumbing -> Marine Sanitation->Heavy Duty Holding Tanks
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
Part No: 01-24WMH
Holding Tank Fitting Kit from TODD ENTERPRISES Home -> Plumbing -> Marine Sanitation->Heavy Duty Holding Tanks
Heavy-duty holding tanks for tough jobs! USCG-approved tanks manufactured from white FDA-approved polyethylene. Molded-in, threaded ports eliminate stress cracks and leaking. Extra-heavy 1/4" wall thickness for strength and lower odor permeability. All ports are standard sizes . Tanks have two 1 1/2" female inlets and one 1/2" female vent inlet . Note: Plumbing fittings not included.
Part No: 93-2220
Series 162 PVC Tubing, 1"ID, 1-5/16"OD from SHIELDS RUBBER Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 162 Polyester Reinforced Clear PVC Tubing
Heavy-walled, FDA-approved compound vinyl hose. Nontoxic, tasteless, odorless. Polyester braid-reinforced. Temp range: 25°–150°F. For use in hot or cold pressure water systems (burst pressure is 250lb. ), vent and drain lines, bilge pump discharge. Sold per foot; 50' max continuous length. Meets NSF-61 requirements. Application: Pressurized water system supply, drain lines, head intake, washdown pumps. Material: FDA formula vinyl. Reinforcement: Polyester braid.
Part No: 116-162-1006
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12