Top Sellers
|
|
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
|
|
Charge Cradle, VHF 150/250 from WEST MARINE
West Marine 150/250 VHF Replacement Accessories.
|
Replacement Staff - 30" from WEST MARINE
Features a beefy, polished, 314 cast stainless steel rail clamp and a staff made of 1/2" stainless-steel tube stock. Plastic insert in clamp permits mounting to 7/8" or 1" diameter rails. Quick-release flag clips included.
|
Pennant Staffs - 17" Staff, for 7/8"- 1" Rail Clamp from WEST MARINE
Features a beefy, polished, 314 cast stainless steel rail clamp and a staff made of 1/2" stainless-steel tube stock. Plastic insert in clamp permits mounting to 7/8" or 1" diameter rails. Quick-release flag clips included.
|
Pennant Staffs - 30" Staff, 7/8" - 1" Rail Clamp from WEST MARINE
Features a beefy, polished, 314 cast stainless steel rail clamp and a staff made of 1/2" stainless-steel tube stock. Plastic insert in clamp permits mounting to 7/8" or 1" diameter rails. Quick-release flag clips included.
|
BC50 120V Charger for VHF50 from WEST MARINE
VHF accessories for West Marine Brand VHF Radios. Power cords, chargers, and headsets for the VHF100 and VHF200. Replacement parts for the VHF100 & 200.
|
110V AC Charge Cord, VHF 150/250 from WEST MARINE
West Marine 150/250 VHF Replacement Accessories.
|
Deluxe Stainless Steel Rail Mount - No Lever from WEST MARINE
Mount antennas quickly and securely to the rail Mount antennas firmly to 7/8" or 1" round rails. Low-profile steel cinch band clamps securely. Ratchet-tooth design keeps the antenna pointed at the angle of your choice. The no-lever model adjusts with a 5/16" Allen wrench.
|
Deluxe Stainless Steel Rail Mount - with Lever from WEST MARINE
Mount antennas quickly and securely to the rail Mount antennas firmly to 7/8" or 1" round rails. Low-profile steel cinch band clamps securely. Ratchet-tooth design keeps the antenna pointed at the angle of your choice. The no-lever model adjusts with a 5/16" Allen wrench.
|
Stainless Steel Tie Down - Transom from INDIANA MARINE CO
The best tie downs we offer, this innovative tie down system features an automatically retracting, self-storing strap. The system is water resistant, submersible and features a snugging ratchet with easy, one-handed operation. Non-scratching, vinyl coated hooks. Stainless-steel tie downs feature all-stainless hardware to last longer in brackish and saltwater environments. For permanent trailer mounting. Mounting hardware included. 2"W durable polyester webbing with a 43"L.
|
Stainless Steel Tie Down - Bow from INDIANA MARINE CO
The best tie downs we offer, this innovative tie down system features an automatically retracting, self-storing strap. The system is water resistant, submersible and features a snugging ratchet with easy, one-handed operation. Non-scratching, vinyl coated hooks. Stainless-steel tie downs feature all-stainless hardware to last longer in brackish and saltwater environments. For permanent trailer mounting. Mounting hardware included. 2"W durable polyester webbing with a 43"L.
|
4" Heavy-Duty Stainless Strap Hinge from WEST MARINE
Type 316 marine-grade stainless steel. Drilled and countersunk for #10 fasteners (sold separately). Pin length: 1".
|
Group 24 12V Starting Battery, 550 CCA, 650 MCA, 90 Res. Min., 34.5lb. from WEST MARINE
They feature a no-spill design that allows you to heel over to angles up to 45°. The exclusive molded-in stainless steel studs and locking hex nut terminals make connections easy, while protecting against corrosion and failure. Manufactured by East Penn, one of the most reputable battery companies in the US, these batteries receive over 250 quality control checks to guarantee superior starting performance every time. Wing nut terminals make connections easy. Convenient carry handle.
|
|
west marine stainless-steel “o” rings
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless Steel “D” Rings
Polished, heliarc-welded, stainless-steel rings.
Part No: C0139-X640-W
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless Steel “D” Rings
Polished, heliarc-welded, stainless-steel rings.
Part No: C0139-X525-W
|
|
|
Home -> Boats & Motors -> Dinghies
Features include two grablines, stainless-steel D-ring with 8' bowline and two D-rings for towing, swivel oarlocks, Velcro® oar holders, two inflatable thwart seats, drain system, two inflation gauges and fittings to accept the optional Sevylor SBM electric motor. Includes aluminum breakdown oars, bellows foot pump and carry bag. Included Equipment: Aluminum breakdown oars, oarlocks, bellows foot pump, two inflatable thwart seats, canvas carry bag . HP Fabric 6'5" 4'6" 22lb.
Part No: TR200CKWM
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Handles & Pulls
Spring-loaded ring immediately returns to flush when released. Type 304 stainless steel . Size: 2 x 2 3/8" .
Part No: F16-1812-1W
|
|
|
Home -> Fishing -> Fishing Accessories->Heavy Duty Premium Fixed Outriggers
Both the black/gold and silver/black poles are 15', four section anodized aluminum poles with color trim rings and stainless steel line guides. Available in your choice of silver with black trim rings or black with gold trim rings. Fits outrigger holder with a 1-1/8" ID tube. HD models for use with 1-1/2" ID tube. 15' telescoping, three-section, heavy duty fiberglass outriggers feature heavy line guides for easy rigging. 1-1/8" base will fit most outrigger holders.
Part No: 88406
|
|
|
Home -> Sailboat -> Sailboat Canvas->Headsail Bags
Allows jib to conveniently remain ”hanked-on” and protected from UV radiation Keep your jib hanked on the forestay and protect it with one of these bags. Ours has a mesh panel to help prevent mildew and to allow moisture to drain. Top-quality, UV-resistant acrylic with a stainless halyard lifting ring to raise the bag off the deck. Protect your jib from damaging UV rays while it's hanked on . Mesh panel drains moisture and prevents mildew; Pacific Blue. Easy-to-lift bagged sail off the deck.
Part No: H114167
|
|
|
|
Home -> Sailboat -> Sailboat Canvas->Headsail Bags
Allows jib to conveniently remain ”hanked-on” and protected from UV radiation Keep your jib hanked on the forestay and protect it with one of these bags. Ours has a mesh panel to help prevent mildew and to allow moisture to drain. Top-quality, UV-resistant acrylic with a stainless halyard lifting ring to raise the bag off the deck. Protect your jib from damaging UV rays while it's hanked on . Mesh panel drains moisture and prevents mildew; Pacific Blue. Easy-to-lift bagged sail off the deck.
Part No: H114159
|
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line -> Anchor Line Accessories->Anchor & Rode Bags
Anchor Bag Durable mesh bag provides a convenient and tangle-free place to store your anchor rode. A number of features add to the life of your rode and make it easier to deploy. The wide mouth is held open with an internal stainless steel ring, but closes easily with a drawstring. . Mesh ends dry quickly and a reinforced slit in the bottom allows the bitter end to be passed outside the bag for securing. Brass boat snap allows you to hang the bag and rode where they’re most convenient.
Part No: AB-018S
|
|
|
Home -> Cabin & Galley -> Containers & Storage->Camera & Gear Tethers
One end of the Camera Tether has a ball-bearing swivel that screws into a camera tripod hole; the other end has a stainless-steel snap hook. Attach Mini Coiled Gear Tethers, (B) or (C) using the stainless snap hook at one end to PFDs or foul weather gear. Attach a GPS, flashlight, or knife at the opposite end. Tether (B) has a stainless clip ring at the opposite end of the strap. Tether (C) has a lanyard with sliding barrel lock at its opposite end. All tethers are 13.
Part No: MAR-MCT1-BLK
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage->Camera & Gear Tethers
One end of the Camera Tether has a ball-bearing swivel that screws into a camera tripod hole; the other end has a stainless-steel snap hook. Attach Mini Coiled Gear Tethers, (B) or (C) using the stainless snap hook at one end to PFDs or foul weather gear. Attach a GPS, flashlight, or knife at the opposite end. Tether (B) has a stainless clip ring at the opposite end of the strap. Tether (C) has a lanyard with sliding barrel lock at its opposite end. All tethers are 13.
Part No: MAR-MCT2-BLK
|
|
|
|
Home -> Fishing -> Fishing Accessories->Heavy Duty Premium Fixed Outriggers
Both the black/gold and silver/black poles are 15', four section anodized aluminum poles with color trim rings and stainless steel line guides. Available in your choice of silver with black trim rings or black with gold trim rings. Fits outrigger holder with a 1-1/8" ID tube. HD models for use with 1-1/2" ID tube. 15' telescoping, three-section, heavy duty fiberglass outriggers feature heavy line guides for easy rigging. 1-1/8" base will fit most outrigger holders.
Part No: 88200
|
|
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line -> Anchor Line Accessories->Anchor & Rode Bags
Anchor Bag Durable mesh bag provides a convenient and tangle-free place to store your anchor rode. A number of features add to the life of your rode and make it easier to deploy. The wide mouth is held open with an internal stainless steel ring, but closes easily with a drawstring. . Mesh ends dry quickly and a reinforced slit in the bottom allows the bitter end to be passed outside the bag for securing. Brass boat snap allows you to hang the bag and rode where they’re most convenient.
Part No: AB-018L
|
|
