West Systems Epoxy How-to DVD from WEST SYSTEM
Basic Application Techniques - A guide to the optimum use of WEST SYSTEM epoxy proucts, including epoxy safety and procedures for coating, bonding, and fairing. . Fiberglass Repair with West Sytem Epoxy - Using WEST SYSTEM epoxy to make structural repairs on fiberglass boats, including repairs to cored and non-cored hulls and how to apply gelcoat over epoxy repairs. . Gelcoat Blister Repair with West System Epoxy - A guide for repairing and preventing gelcoat blisters on fiberglass boats. .

#105-A Epoxy Resin, Qt. from WEST SYSTEM
It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. An excellent adhesive, 105 will bridge gaps and fill voids when modified with WEST SYSTEM fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without "fisheyeing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyesters.

#105-B Epoxy Resin, Gal. from WEST SYSTEM
It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. An excellent adhesive, 105 will bridge gaps and fill voids when modified with WEST SYSTEM fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without "fisheyeing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyesters.

#105-C Epoxy Resin, 4.35 Gal. from WEST SYSTEM
It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. An excellent adhesive, 105 will bridge gaps and fill voids when modified with WEST SYSTEM fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without "fisheyeing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyesters.

G/Flex 655, 2 Qt. (one 1 qt. can of resin, one 1 qt. can of hardener) from WEST SYSTEM
G/flex 655 Thickened Epoxy Adhesive comes with a thickening agent already added. G/flex offers important features: Toughness and Flexibility G/flex has been toughened. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. Bonds to wet and damp surfaces G/flex has the ability to glue damp woods.

G/Flex 650 Kit from WEST SYSTEM
G/flex 655 Thickened Epoxy Adhesive comes with a thickening agent already added. G/flex offers important features: Toughness and Flexibility G/flex has been toughened. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. Bonds to wet and damp surfaces G/flex has the ability to glue damp woods.

#205-C Fast Hardener, 0.94gal. from WEST SYSTEM
It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with the 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Mini Pump Kit is a must for precise metering of all group sizes of WEST SYSTEM resins and hardeners.

Special Coating Hardener - Clear, 0.33 Gallon from WEST SYSTEM
This hardener was especially developed for use with WEST SYSTEM Brand 105 Resin in coating applications where an exceptionally clear, moisture-resistant, natural wood finish is desired. An ultraviolet inhibiting additive improves the resistance of a WEST SYSTEM 105/207 mixture to sunlight, but the cured epoxy surface will still require the additional protection of a quality UV-filtering varnish. Mini Pump Kit is a must for precise metering of all group sizes of WEST SYSTEM resins and hardeners.

#300 Mini Pump Set from WEST SYSTEM
Your insurance policy against costly mixing mistakes! 300 Mini Pumps are designed for convenient and accurate metering of all Group Size A, B and C WEST SYSTEM resin and hardeners. The 300 Mini Pumps Set contains one resin pump and two hardener pumps. 105/205-206 pumps deliver approximately 0. 105/207-209 pumps deliver approximately 0. As packaged, the pumps are ready to install on the Group Size B containers. A package of extension tubes for Group Size A containers is included with the set.

#209-SB Extra Slow Hardener, 0.33 Gallon from WEST SYSTEM
Provides approximately twice the working time of 206 Slow Hardener. Not intended for clear coating. Mini Pump Kit is a must for precise metering of all group sizes of WEST SYSTEM resins and hardeners. Mix Ratio, Resin:Hardener Pot life at 72°F (22°C) at 95°F (35°C) Cure to a solid state at 72°F (22°C) at 95°F (35°C) Cure to maximum strength at 72°F Minimum recommended temperature Pumps 3:1 by volume (3.

Epoxy Pigment - White, 6 OZ from WEST SYSTEM
WEST SYSTEM pigments are epoxy-based liquid colorants used to tint the epoxy mixture to provide an even color base for the final finish system. Cured, pigmented epoxy surfaces are not a final finish surface, but require an additional opaque or UV filter coating for ultraviolet protection. Add to the mixed resin/hardener at a rate of approximately one teaspoon of pigment to 8 fl oz of epoxy. More pigment will increase opaqueness and mixture viscosity. 501 White Pigment - One 4 oz. - One 4 oz.

#206-C Slow Hardener, 0.94gal. from WEST SYSTEM
206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Mini Pump Kit is a must for precise metering of all group sizes of WEST SYSTEM resins and hardeners .

#206-B Slow Hardener, 0.86qt. from WEST SYSTEM
206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Mini Pump Kit is a must for precise metering of all group sizes of WEST SYSTEM resins and hardeners .

Special Coating Hardener - Clear, 1.5 Gallons from WEST SYSTEM
This hardener was especially developed for use with WEST SYSTEM Brand 105 Resin in coating applications where an exceptionally clear, moisture-resistant, natural wood finish is desired. An ultraviolet inhibiting additive improves the resistance of a WEST SYSTEM 105/207 mixture to sunlight, but the cured epoxy surface will still require the additional protection of a quality UV-filtering varnish. Mini Pump Kit is a must for precise metering of all group sizes of WEST SYSTEM resins and hardeners.

#205-B Fast Hardener, 0.86qt. from WEST SYSTEM
It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with the 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Mini Pump Kit is a must for precise metering of all group sizes of WEST SYSTEM resins and hardeners.