Top Sellers
Fillet Spoon Knife 12 1/2" from WEST MARINE
West Marine's Fillet Knives have been developed with real anglers in mind. Highest-quality surgical stainless-blades are molded into non-slip rubberized soft grip handles for maximum sharpness, comfort and safety. Tang hilt protects your hand. Bright orange plastic boosts visibility in low-light conditions. The spoon model makes scraping out entrails and blood veins easy and mess-less.
|
$100 Gift Card from WEST MARINE
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
|
$250 Gift Card from WEST MARINE
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
|
West Marine SOS Kid’s Hybrid Rearming Kit from WEST MARINE
West Marine SOS Kid’s Hybrid Rearming Kit Style: Automatic. Cylinder Weight: 12g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: SOS Kid’s Hybrid. Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
WM Self-Coiling Hose - 15' from WEST MARINE
Featuring an improved flow rate and field-serviceable couplings! With an improved flow rate of 360gph, this hose delivers a powerful stream of water to make deck and boat wash-downs quick and easy. In the unlikely event of a rupture, the couplings can be removed with common hand tools, the hose shortened and the couplings replaced, which is a big advantage if you happen to be offshore! 90% usable length. Field-serviceable couplings. Strain relief at hose connection end'. 360gph flow rate.
|
West Marine 1000/Offshore PFD Rearming Kit from WEST MARINE
West Marine 1000/Offshore PFD Rearming Kit Style: Manual. Cylinder Weight: 33g. Cylinder Neck Diameter: 1/2" bayonet. Inflator Type: Secumar 401. Kit Contents: Cylinder with seal indicator. PFD Brands Commonly Used With*: West Marine 1000/Offshore PFD . Inflator Number: 401. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
Sta-Bil Gas Stabilizer - 8oz. from STA-BIL
Guards against gum and varnish in fuelKeeps stored fuel fresh indefinitely so your engine will start easily even after being stored all winter. Prevents gum and varnish buildup and protects metal surfaces from corrosion. Use for storing up to 12 months. 8oz.
|
Tapered Fiberglass Batten, 39" x 2" from WEST MARINE
Made for West Marine, tapered battens for every sail These battens are used by many well-known sail lofts. They are tapered for better sail shape and have protective vinyl tips. Label indicates which end to insert first.
|
Portable Cabin Heater from WEST MARINE
Melt away the morning chill! This ultra-quiet heater is perfect for boats, homes and offices. Versatility and simplicity with three heat settings—1500W (5200Btu), 900W (3120Btu) and “energy saver” 600W (2080Btu), which draws just 5A. Adjustable thermostat control keeps you comfortable. Antifreeze setting automatically turns on when temperature drops to 38°F. Overheat protector will not clog with dust or dirt. Draw: 5A–13A. Warranty: Three years.
|
Marine Silicone Sealant, Clear, 10oz. Tube from WEST MARINE
Use wherever a flexible, removable seal is required A specially-formulated marine silicone that won’t sag, shrink or turn yellow. Can be used above and below the waterline wherever a flexible, removable seal is required. Excellent for bedding deck fittings and hardware that you may want to remove at some time. Also good for insulating between dissimilar metals to prevent galvanic corrosion. Formulation: One-part silicone sealant . Bonds to non-oily woods, metal, fiberglass, glass, plastics .
|
Premium Gold Teak Oil - Pint from WEST MARINE
For a rich golden finish, try this oil!If you prefer teak with a golden color, try this premium oil. A blend of natural oils, it penetrates deeply into teak and other hardwoods. UV-resistant golden finish is ideal for exterior wood applications. It’s easy to apply, quick-drying and it beautifies and protects all onboard wood against cracking or peeling.
|
Engine Winterizing Kit from WEST MARINE
Winterize your outboard or sterndrive with this convenient kitUses your existing flusher and a garden hose to winterize your outboard or sterndrive engine, even while it’s on the trailer. Kit includes a five-gallon jug, hose fittings and instructions for winterizing. You supply five gallons of nontoxic antifreeze for each engine. Complete instructions are included.
|
Head & Holding Tank Neutralizer & Flush, Pint from WEST MARINE
Use this preparation to neutralize, flush, and prepare your head and holding tank for use with new treatments. Eliminates cross contamination which can render a holding tank treatment useless when switching from one type to another. Also ideal for spring commissioning or as preparation for winter layup.
|
G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
|
2-5/8" x 1-1/2" Euro Utility Hinge from WEST MARINE
Stamped utility hinge with 1/2" offset from TACO. Made of marine grade 304 stainless steel with polished finish, non-corrosive utility hinge is ideal for hatches, cabinets, and doors inside and outside the boat. Measures 2-5/8" x 1-1/2" x .
|
|
from STA-BIL, Gallon from STARBRITE, Gold from WEST MARINE
|
|
Home -> Engine Systems -> Engine Lubrication -> Fuel Additives->Marine Formula Sta-Bil
Marine Formula Sta-BilNew, concentrated formula designed to fight the damaging effects of Ethanol Improves engine performance year-round — not just for seasonal storage.
Part No: 22240
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Gelcoat Repair Kits->Gelcoat Repair Kits
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.
Part No: 95-742PS
|
|
|
|
Home -> Cordage -> Rigging Products
Two sizes make for neater, smoother splices. One fid is for 1/4"–3/8" line; the other is for 7/16" and larger line. Packed in a plastic storage tube.
Part No: 9100-00-00000
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Kart-Ahoy Dock Carts
Compact, lightweight, affordable cart features 12" plastic wheels that roll smoothly over bumpy docks. Extra cargo baskets can be stacked on top for added capacity. For storage, the plastic basket folds flat and the powdercoat steel handle detaches. Material: Plastic/steel . Maximum Load Capacity: 100lb. . Cargo Area: 2. 71cu ft. . Wheel Type/Size: Plastic, 12" . Dimensions: 23.
Part No: 11200
|
|
|
|
Silver or gold tubes are anodized for long life in the marine environment. Fabricated from cold drawn aluminum with no unsightly weld seams. Available in aluminum schedule pipe sizes 3/4" thru 1 1/4" in horizontal and vertical models. If using stainless steel tube, please go down 1/4" in size. Type:Clamp on. # of Rods:One. Material:Aluminum. Lining:White vinyl. Diameter:Rod holder is 1 5/8" ID. Mount:Clamp on.
Part No: 88164-1
|
|
|
|
Home -> Cordage -> Rigging Products -> Wind Instruments
Improved with bird-proof spike Super-sensitive to slight changes in wind direction at the masthead, Windex Wind Indicators are popular around the world because they offer such an exceptional value. They feature sapphire jewel suspension bearings, large fin/low inertia vanes and easy-to-read, fully adjustable tacking-tab system for quick reference. The choice for most sailors, the Windex 15 features a 15" vane and reflectors for high visibility day and night.
Part No: 3150
|
|
|
|
Home -> Safety -> Man Overboard Gear -> Lifesling
It can be used as a lifting sling if the crewmember needs help out of the water . The Lifesling2 system consists of a flotation collar which is a blend of the traditional horseshoe buoy and a helicopter rescue sling. Graphics on the bag illustrate the instructions for recovering a person in the water. Note: This USCG-approved Lifesling2 is for powerboats with a lifting point 10' above the water, and sailboats over 20' LOA. USCG Type: Type V which substitutes for a Type IV . Buoyancy: 21 lb.
Part No: WMLS2
|
|
|
|
Home -> Engine Systems -> Motor Mounts
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
Part No: 521-125AL
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> Oil Change Pumps
"We don’t know anyone who looks forward to changing engine oil, but this pump should make the job a little easier. The handle makes it easy to carry the goo to a harbor recycling location or your local gas station that accepts used oil. Your engine will appreciate it!" Improved durability and capable of inflating high-pressure This value-priced oil changer makes changing oil a snap! Simply place the transfer probe down the dipstick tube and start pumping.
Part No: 1175
|
|
![Flap Valve, Head-Mate from WILCOX]( "Flap Valve, Head-Mate from WILCOX")
|
|
Home -> Plumbing -> Fittings & Valves->Wilcox-Crittendon Service and Repair Kits
We stock an extensive selection of parts and service kits for virtually all products. In addition, we can quickly get any part you need to repair your Wilcox-Crittenden, Jabsco, Shurflo, Raritan or Groco equipment directly from the manufacturer through our Special Order department. If you know the part number you need simply order the part using the Model or manufacturer's part number. Visit www. wilcoxcrittenden. com/replacement_parts.
Part No: PO195-96
|
|
|
|
Home -> Engine Systems -> Engine Parts->NGK Spark Plugs
**CR9EB *.
Part No: 6955
|
|
|
|
Home -> Anchor & Docking -> Anchors->River Anchors
Combines the features of a traditional mushroom anchor with flukes for better bottom penetration. PVC coating is easy to clean and won’t scuff your boat. Recommended for use in protected inland waters only.
Part No: 530-E-UPC
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
Specially formulated to prevent ethanol and non-ethanol gasoline related problems. ValvTect Marine Gasoline Ethanol Treatment is designed to stabilize fuel up to one year, prevent octane loss, control moisture, prevent phase separation, prevent corrosion, clean up carbon deposits and reduce fuel consumption. 12oz.
Part No: VEGA12
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass
Excellent for sealing hairline cracks in gelcoatThis penetrating copolymer sealant is formulated to be so thin that by using capillary action it can find its way inside fine cracks and set to a clear, flexible seal. Use on wood, rubber, glass, metals, fiberglass, Lexan, ceramic and concrete. Formulation: One-part water-based acrylic polymer sealant. Recommended Usage: Fixing leaks in wood, rubber, glass, metal, ceramics, and other materials . until saturated. Color: Milky . Quantity: 2oz.
Part No: CCC02
|
|
|
|
Home -> Engine Systems -> Steering Systems
Replacement front seal kits for both front and rear mount helms. HS5147 fits BayStar front mount and SportTilt helms . Contains 3 screws, shaft seal and o-ring seal.
Part No: HS5147
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Chemicals & Tissue
Raritan C. P. cleans potties! This is the only bowl cleaner that can be combined with K. O. It eliminates the worst raw odors from the intake line. Cleans without brushing. Bio-enzymatic.
Part No: 1PCP22
|
|
|
|
Home -> Cordage -> Rigging Products->Waxed Whipping Twine
Very strong Dacron twince for whipping and seizing line of all types. Includes a sailmaker's needle . Available in white or brown . 3oz.
Part No: TY-KIT
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes
Designed for easy installation, this hidden horn mounts from the outside. Compact in size, but capable of 107db loudness. Comes with both black and white snap-on ASA plastic grilles. A weatherproof fabric liner lets sound through, but keeps water out. Prewired for 12V installation. Material: ABS plastic . Loudness dB: 107dB . Design Standards: Meets ABYC specs for boats up to 12 meters . Dimensions: 2"H x 3-3/8"W x 3-1/4"D . Power Requirements: 12 Volts .
Part No: 10079
|
|
|
|
Home -> Sailboat -> Rigging Products->Dacron Sail Repair Tape
Make emergency sail repairs with tough, sticky Dacron tape For temporary, emergency sail repairs. Much tougher, stronger, and stickier than spinnaker repair tape.
Part No: J613WT
|
|
|
|
Chesapeake Bay and the Intracoastal Waterway to Florida The Mid Atlantic Waterway Guide is updated annually to provide the most comprehensive and current data available. Information like marina listings, distance tables, cruising tips, repair yards, significant harbors, restaurants, rules of the road, customs, mail drops, pump-outs, holding tanks, and bridge schedules. 5” x 11”, spiral bound and 512 pages. These guides also include detailed coast information on the below locations.
Part No: MID-ATLANTIC 08
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlasses
Compact, deck-mounted windlass has power up/free-fall down capabilities and includes a built in light for added convenience. With low power draw and free fall deployment, this anchor winch puts less stress on your battery for longer battery life. Its small footprint takes up less deck space to mount and the spur gear train allows fast retrieval speeds and minimal current draw. Gear feature prevents rope from over running during anchor deployment. Style: Horizontal . Boat Length: Up to 25'' .
Part No: P44200
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.
Classic Italian styling at an affordable price. Our Folletto wheels feature modern styling that will enhance the look of any power boat. These wheels feature aluminum spoke with polyurethane grips. The 3/4" tapered hub fits most steering systems. Black aluminum spoke. Black polyurethane grip. Burlwood inserts. 13-3/4" Diameter.
Part No: PU021111
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging, Sewing, Splicing
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.
Part No: 7850
|
|
|
|
Home -> Safety -> Man Overboard Gear -> Type IV PFD's->Type IV Standard Buoyant Cushions
Conventional throwable cushions meet USCG requirements for Type IV PFDs. Comfortable to sit on or to use as a backrest. Durable fabric covers. Heavy polypropylene straps make them easy to throw. Buoyancy: 18 lbs. Dimensions: 15"L x 16"W x 2. 5"H.
Part No: 807802
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
Protects bearings against salt air, saltwater and atmospheric chemical corrosion. For wheel bearings (including disc brake wheel bearings), swivel hinges, pins, winches and anchor chain reels. Lubricates and protects bearings. Great for wheel bearings, swivel hinges, pins, and winches. Avaialble in two 3oz. cartridges, 14oz. cartridge, 1lb. can or 5. 2oz.
Part No: 3704715
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes -> Specialty Cleaners->Star Brite Instant Hull Cleaner
Formulated extra strong to get the job doneSimply spray or wipe on. Removes scum, algae and rust stains from fiberglass, metal and painted surfaces without rubbing. Extremely strong cleaner, avoid contact with galvanized metal. Removes scum, algae and rust stains. For use on fiberglass, metal and painted surfaces. Avoid contact with galvanized metal.
Part No: 081700N
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Titan Bilge Pumps
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".
Part No: BP4402
|
|
|
|
Home -> Engine Systems -> Steering Systems
Replacement shaft seal kit HS5176 fits various post-1990 SeaStar 1. 4, 1. 7 (I), 2. 0, 2. 4 (II), SeaStar Pro and SeaStar helms.
Part No: HS5176
|
|
|
|
Home -> Anchor & Docking -> Anchors
Safe off-the-deck stowage for Danforth-style anchors to 22lb. This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel.
Part No: AH-100
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot->Spyderline by the Spool
Very low stretch with a variety of uses This spiderweb sized, high-performance line has a Dyneema SK-75 core inside a polyester double braid cover that provides superior strength for its tiny diameter. It is flexible, yet firm enough to be led through small leads, micro blocks and purchase systems and is also a great choice as sail ties for the performance Opti sailor. Best Use: Performance dinghy cascade systems and control lines . Core Fiber/Construction: Dyneema SK-75 braid .
Part No: 2977-04-00050
|
|
|
