Top Sellers
Gas Fill & Tank Vent - Black from PERKO
Perko Gas Fill and Tank Vent This ingenious plastic deck fill has a vent with a flame arrestor built right into the fill flange. A flip-up cap eliminates the need for a deck key and no ground wire is required.
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
|
Replacement Cap with Gauge from MOELLER
Externally threaded cap fits Moeller tanks 031103, 031106, 031109, 031112, 031212. Scepter cap fits 4158, 4921, 3780 & 3781 tanks. Internal threaded cap fits 31612, 31615, 31515, 31818, 31620 & 31526 tanks.
|
Clamshell Vent, 9/16"H x 2"W x 2"L from PERKO
Type: Passive clamshell vent Material: Chrome-plated brass Warranty: Five years.
|
Bottom Support Pole Caps, Non-skid from DR. SHRINK
Bottom Support Pole Caps Dr. Shrink carries a full line of premium installation supplies to ensure a professional shrinkwrap job from start to finish.
|
Kit, 800/900 Vacuum Breaker from SEALAND
Heads need to be properly maintained to ensure proper functioning Genuine Sealand parts Maintenance kitsTreatment kits.
|
TankWatch® 4 Water/Holding Tank Monitor from SEALAND
Reliable micro float switches activate empty, low, mid and full tank levels on the indicator panel. No electrical components contact water or waste. Easy to install using universal flange (sold separately). Includes cap with micro float switches . Indicator panel . Gasket and stainless mounting hardware . Adapts to fit any water or holding tank up to 22" . 45" adjustable probes available by Special Order .
|
Kit, Sanipottie Latch - White from SEALAND
Heads need to be properly maintained to ensure proper functioning Genuine Sealand parts Maintenance kitsTreatment kits.
|
Footman’s Loop, Fits 2" Webbing from SEAFIT
Low-profile stainless-steel straps for attaching webbing to flat surfaces.
|
12 Gallon Topside Fuel Tank from MOELLER
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 6"H.
|
|
|
|
|
Gas Caddy from TODD ENTERPRISES
Move 28 gallons of Gas in our smooth-rolling caddy Store and transport fuel safely on docks or onboard. Gas Caddy holds 28 gallons of fuel. Includes 10' of UL Approved hose with static wire, molded hose brackets, UL Approved spring loaded nozzle, 3/4" UL Approved ball valve, aluminum non sparking axle, pneumatic tires with nylon bearings, nylon wheel hubs, vented cap and a molded-in baffle for strength & durability. All Caddies bear the UN Marking, “UN3H1W. ” Color-coded red.
|
Vent, Chrome Plated Brass, Thru Hull, 90 degree Elbow from MOELLER
90° Elbow Chrome Plated Brass Thru Hull Vent Accommodates 5/8" I. D.
|
Five Louver Stainless Steel Vent from WHITECAP INDUSTRIES
Mount on doors, bulkheads, in the cockpit and on hatch boards. Helps to eliminate mildew. . Pre-drilled for six #8 screws. . Mfr. 's lifetime limited warranty. . Ship 0. 5 lbs.
|
|
Vented Loop Cap, MWL from WICHARD, Platinum from SEALAND
|
|
Home -> Sailboat -> Tiller & Rudder
Solid Teak Table Double-Leaf with Fitting Kit, unvarnished.
Part No: 89400283
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Carts->Kart-Ahoy Dock Carts
Identical dimensions to the Lightweight Dock Cart (Model 412403), but with larger diameter wheels for added mobility and greater loadbearing capacity. Handles 185lb. of payload and boasts 15" wheels. The handle and cargo baskets are interchangeable between the two models. Recommended for freshwater use only. Material: Plastic/steel . Maximum Load Capacity: 185lb. . Cargo Area: 2. 71cu. ft.
Part No: 11210
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Replacement Parts and Service
Heads need to be properly maintained to ensure proper functioning Genuine Sealand parts Maintenance kitsTreatment kits.
Part No: 385310105
|
|
|
|
Home -> Plumbing -> Bilge Pumps
The 1800gph pumping capacity and extra-long 24' power cord make this pump great for boats with shore power or protecting basements from flooding during wet weather. Motor and durable housing will last for years on the boat or in the home. 5/8" garden hose adapter. gph: 1800. Draw: 1. 1A@110V AC. Built-In Switch: Yes. Material: Plastic. Dimensions: 7-3/4" x 4-3/4". Port Size: 1-1/8".
Part No: A53S-24
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Small Bronze Ball Valves with Brass Ball
Free-floating, chrome-plated brass ball. NPT threads. Stainlesssteel handle. Note: These are for inline, non-saltwater applications.
Part No: 70-102-10
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Snap Shackles->Forged Snap Shackles
Highest quality drop-forged 17-4 PH stainless-steel shackles are beautifully polished, with smooth contours. Great strength and reliability.
Part No: 2473
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Replacement Gas Struts for Dock Boxes & Hatches
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
Part No: 1837
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
Leaves a high gloss finish without wheel or swirl marksRemove fine scratches from production gel coat. Unique formulation reduces slinging while buffing and leaves a high gloss finish without wheel or swirl marks. Contains no wax or silicone.
Part No: 06025
|
|
|
|
Home -> Sailboat -> Blocks->29mm Carbo AirBlocks®
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
Part No: 371
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Freedom Series Windlasses
These low-profile windlasses feature a patented tension system that maintains resistance required to feed chain/rope rode into the locker instead of jamming it in the windlass. Designed for easy installation, the motor can be oriented in any of 12 positions below decks. Two pieces bolt together quickly. Gasketed, watertight base. For decks to 2 3/4" thick. Capstan models and extra-long shafts for thick decks are available by Special Order. Style: Vertical . Rode Type: Rope/chain .
Part No: RC50012V
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Sail Covers & Sheet Bag->Mast Sheet Bags
Keep the mast area tidy with this handy sheet and gear bag. Large 2" webbing hook-and-loop straps secure bag to the mast and out of the way.
Part No: BP560
|
|
|
|
Home -> Safety -> First Aid & Medical
Drug-free, electronic motion sickness relief! The only electronic drug-free, FDA cleared remedy for motion sickness, this medical device utilizes gentle user-controlled electrical stimulation to send messages to your brain that block the signals that cause nausea. Usage is easy—just strap it on the underside of your wrist and adjust to the setting that is most comfortable. No drowsiness or drug like side effects! Features include simple ON/OFF push-button control and five stimulation levels.
Part No: RB-EL
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Black Rubber Rail Inserts
Rubber inserts add cushioning to your aluminum rubrails. . These fit styles #5, #6 and #7. Rub rails and inserts sold separately. .
Part No: V12-0334BKA50-1
|
|
|
|
Home -> Engine Systems -> Engine Lubrication->Delo 400 Engine Oil
Premium quality, heavy-duty motor oil exceeds all OEM requirements and provides exceptional protection, even under severe conditions Largest selling heavy duty engine oil in the USA. Premium quality engine oil exceeds industry and factory performance specifications. Recommended for all 4-cycle diesel and 4-cycle gasoline engines operating under severe conditions. Formulated with the most advanced additive technology. Superior results with either low or normal sulfur diesel fuels.
Part No: 222220448
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac
Smooth, adjustable control of tiller movement, for short periods of "self-steering. " Particularly useful when changing sails, motoring, etc. on short-handed boats.
Part No: 2205
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring
Durable polypropylene rope through a solid foam float has ample bright at one end for boathook pickup. Galvanized thimble at opposite end accomodates pennant from mooring buoy. Red band makes it more visible Made in U. S. A.
Part No: 1203
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->Classic Spun Three-Strand Polyester Line
.
Part No: 7230-10-00600
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->Automatic 12V Bilge Pumps
An internal computer chip cycles these pumps on every 2. 5 minutes, then quickly shuts them down if no water is detected. Built-in strainer bases snap off to make cleaning easy. Completely submersible, rust-proof, corrosion-proof and ignition-protected. Three-way wiring enables connection to a switch for manual override or indicator light. Small 500gph pump is designed to handle spray and rainwater. Built-In Switch: Yes, cycles every 2. 5 min.
Part No: 25S
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Power Tilt/Trim->Tilt/Trim Motors, Outboard Applications
Tilt/Trim Motors, Outboard Applications.
Part No: 18-6780
|
|
|
|
Home -> Safety -> First Aid & Medical -> Seasickness
Comfortable, elastic, acupressure wrist bands exert a gentle pressure on wrist points helping many people avoid the discomfort of rough seas or bumpy travel. Safe and easy to use—just slip them on over your wrists and position them for enjoyable travel. Long-lasting fabric is comfortable and washable. Carry case included. One size fits all.
Part No: 00400
|
|
|
|
Recessed fuse contacts, no cover required. Black thermoplastic.
Part No: 46379-10-BP
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives -> Caulking Compounds->Fast Cure 5200 Polyurethane Adhesive/Sealant
Cures tack-free in just two hours The same performance as standard 5200, but becomes tack-free in just two hours and cures in 24 hours. White. Formulation: One-part polyurethane adhesive/sealant . Recommended Usage: Permanent bonding, above or below water. Extremely strong & flexible . Material Incompatibilities: Acrylics, Some plastics (ABS, Lexan) . Cure Time: Tack-free: 2 hrs. ; Complete cure: 24 hrs. . Cleanup: Mineral spirits or kerosene .
Part No: 05220
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Stainless Dished Destroyer™ Wheels
These 5-spoke wheels are the latest addition to Edson’s line of Destroyer™ Wheels. Attractive, dished shape and newly-styled, straight hub. Tapered, hollow spokes. Lightweight 1" ovalized grip tubing is the industry standard for smooth wheel steering. 1" bore fits most Edson wheel shafts. Requires Wheel Nut fastener.
Part No: 645ST-26-5
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Aluminum Battlestick Tiller Extension Accessories
Accessories for Aluminum Battlestick Tiller Extensions.
Part No: RF3133
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Female Pipe-to-Hose Adapters
Nylon Fittings, Female Pipe-to-Hose.
Part No: 139920
|
|
|
|
Home -> Engine Systems -> Engine Parts->Gen-Sep Water Separators
Position the water drain from the Gen-Sep just below the water line to eliminate water splash, especially important for nighttime operation. Gen-Sep will remove nearly all of the cooling water from the exhaust. That water can then be drained to a hull fitting just below the waterline, thus eliminating excess noise often created by splashing and pulsating water flow at the exhaust outlet. A slight downward angle is required for both the exhaust outlet and the exhaust gas tube. Dimensions: 10.
Part No: 1020200
|
|
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line->Anchor Rodes
These super flexible nylon anchor lines are designed for trailerable watercraft up to 26'.
Part No: 75-7010
|
|
|
|
Home -> Plumbing -> Fittings & Valves
Loop Cap Replacement for marelon vented loops.
Part No: 903002
|
|
|
|
Home -> Safety -> Life Jackets->Manual Inflatable PFD Rearming Kits
West Marine/Stearns PFD Rearming Kit Style: Manual. Cylinder Weight: 16g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin. PFD Brands Commonly Used With*: West Marine/Stearns PFD. Inflator Number: 840. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
Part No: 0925KIT-00-WMP
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers -> Refrigerators
ColdMachine parts and accessories for Adler/Barbour systems.
Part No: F1701
|
|
|
