Top Sellers
|
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Mas Gelcoat Repair Kit, White from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.
|
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
A popular choice for gas and diesel inboard engines, White Premier instruments feature white dials with modern black and blue graphics and superior light pipe illumination. When illuminated, black dial grads and pointer become red. Fog-resistant design for enhanced readability.
|
|
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
AC 36-Position Circuit Breaker Panel, 27 Circuit Breakers, 14-3/4" x 11-1/4" from BLUE SEA SYSTEMS
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
|
CP Bronze Strap Hinge - 1.125" H x 6" W from PERKO
Chrome plated bronze. Pin Height: 1-1/8" by 6" open width. Each hinge requires six #10 fasteners.
|
Gas Deck Fill, Locking from PERKO
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
|
|
Step Pad, 10-3/4" x 5-1/4", Blue from LEWMAR
Maintain your footing under all conditions! Self-adhesive, diamond-patterned, nonskid pads are great for decks, steps, dinghy floors, personal watercraft, etc. They resist wear and tear, peeling, saltwater, fuels and chemicals. Pads have rounded edges and are precut to fit most common step sizes. Trim with scissors for a custom fit. Peel-and-stick installation. Sold in pairs.
|
G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
|
Shrink Tape, 2" x 180', Blue from DR. SHRINK
Heat Shrinkwrap Tape Heat Shrink Tapes are designed for repairing holes in the shrinkwrap, for taping pleats and also for attaching zipper access doors. Heat shrink tape is not designed to be stuck to the hull or other parts of the boats as it will leave an adhesive residue.
|
|
|
|
from KENT, White from PERKO, 1, 1-1, Blue from DR, Quart from STERLING
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Shaft/Prop Nut Anodes->Anodes & Anode Kit
Mercury/MerCruiser Anodes and Anode Kit - VPN - - Description - - Fits - A 31640Q 4 Trim Tab Anode Fits most Mercury/Mariner outboards 35 hp. & above and all MerCruiser except Bravo. & above and all MerCruiser except Bravo. C 806189Q 1 Trim Cylinder Anode Fits Alpha One Gen II drives. D 806190Q 1 Trim Cylinder Anode Fits Bravo I, II, III, X, XR, XZ and Blackhawk drives. F 826134Q Side Pocket Anode Fits Mercury/Mariner 30-300hp outboards, Force 90 & 120hp 1995 and newer outboards.
Part No: 818298Q1
|
|
|
|
Home -> Engine Systems -> Engine Parts->NGK Spark Plugs
**BR8ES *.
Part No: 3961
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Gunnel Guards
These polyester-covered guards will protect your boat from dings and scratches and they won’t rot in the sun or saltwater like cotton guards. Great for use on dinghies and swim platforms, too. Fabric tabs attach easily with screws or nails. Half Round is for flat surfaces; 3/4 Round is for 90° edges. Sold in 10' or 20' lengths or by the foot up to 50'. Material: Polyester fabric/closed-cell foam . Attachment Method: Screws or nails . Shock Absorption Mechanism: Foam padding .
Part No: GG1.5HR.20
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Bi-Color and Sidelights
For powerboats and sailboats less than 20m or 65. 6'. Plastic frames with ultrasonically welded lenses and gasketed plastic bases. 2nm visibility. Per pair, except bi-color. Case Material: Plastic . Case Dimensions: 3-1/2"L x 2-1/4"W x 13/16"H . Mounting Hardware: #8 FHMS (sold separately) . Volts: 12V . Draw: 0. 7A .
Part No: 0254W00DP1
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot->MFP (Multi-Filament Polypropylene) Floatine
Multi-filament Polypropylene Floating Line 2-in-1 braid with a multi-filament polypropylene cover and floating core. Yellow with red ID. A versatile, general purpose line that floats. Soft hand feels like a Dacron double braid. Accepts knots well; doesn't slip. Perfect for dinghy painters. Polypropylene double braid . Floats . Highly visible . Makes great stern tie lines⁄tow lines . Easy knot tying .
Part No: 461024106020
|
|
|
|
Home -> Engine Systems -> Engine Parts->Replacement Fuel Water Separator Elements
Remove harmful contaminants without filtering detergent additivesRemove harmful contaminants without filtering detergent additives. Engineered for long life, low restriction and efficient filtering performance.
Part No: 18-7931
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
Orange, 11. 75"W polycarbonate steps collapse into a 6"H bundle for easy storage. Steps are connected by nylon rope with a top loop that quickly secures to cleat or railing.
Part No: 582501-1
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Mechanical Steering->Transom Support Master Mounting Kits
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
Part No: SA27256P
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Barb-Fuel 1/4Fnp x 1/8Mnpt Brs|Barb-Fuel 1/4Fnp x 1/8Mnpt Brs.
Part No: 033417-10
|
|
|
|
Home -> Engine Systems -> Engine Parts->Parts for 500, 900 & 1000 Turbine Series Filters
Parts for 500, 900 and 1000 Turbine Series Filters.
Part No: RK 30488
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil
Chris Craft Stain - Pint Fills grain while staining wood, reducing the number of coats of varnish needed. May also be used on bare mahogany planking before applying primer or sanding surfacer.
Part No: Y573/PT
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon In-Line Check Valves
Noncorroding nylon.
Part No: G#74-9
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil
Reflects spotlights and headlamps for increased night visibility and safety. Use on a variety of surfaces, including metal, wood, fiberglass, plastic and more. 10oz.
Part No: 214944
|
|
|
|
Home -> Engine Systems -> Motor Mounts->Nova Lift™
Forespar's Nova Lift products combine elegant styling with superb strength and function. Other brands swing left and right without control. Nova Lift comes with a stainless-steel lower mounting tube that will accommodate 30" height rails. Vessels with rails higher than 30" will require the use of a deck pad (not included) to raise the installation to the proper height. The Nova Lift with Winch is ideal for trawlers and motor yachts where sailboat winches are not available. 220 lbs.
Part No: 153311
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Finish Trim Moldings
Assorted Teak Finish Trim Moldings.
Part No: 60826
|
|
|
|
|
The new MAX Megawide charts let you see animated NavAids on your display exactly as they appear and in real time, get at-a-glimpse info about current strength and direction, and even get an aerial view of an unfamiliar inlet before you enter. Get details for more than 1,000 U. S. MAX Megawide chart technology also includes data on fishing spots, hazards, points of interest, land elevation contours, bottom depth contours and more. View charts in 3-D mode and pan or zoom for more detailed info.
Part No: MAX Lakes North
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Chain Stoppers
18" long stainless steel; PVC coated with 4" bolt, nut and snap link Fits 1/4", 5/16" and 3/8" chain.
Part No: SS180001
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
Handy when you need it, but out of the way when you don't! Projects just 13/16" when folded. Chrome-lated brass wtih a stainless steel spring.
Part No: 322620-1
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers
Allows you to set up two operation stations for your windlass. A footswitch at the bow and a hand held remote at the helm or two foot switches, it's all up to you.
Part No: 0052507
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->2-Part Linear Polyurethane Enamel
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
Part No: U-3656 QT
|
|
|
|
Home -> Cordage -> Nylon Rope By The Foot -> 3-strand Nylon Line->Premium Three-Strand Nylon Line
Dramatic resistance to damaging internal and external abrasion Combining premium nylon fiber with a high-quality marine coating and New England Rope’s superior manufacturing processes produces line that is five times more abrasion-resistant wet than any other nylon line. You can actually feel this critical performance advantage when you handle the supple line. Stretch: 16% at 15% of breaking strength. *Approximately 10–15% less strength than White Premium Three-Strand Nylon.
Part No: 7014-14-00600
|
|
|
|
Bows moounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water-collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gasket provides snug fit for fiberglass bows. Super strong and flexible, will not take a “set”. Cut to desired length. Incude rubber end covers to grab socket.
Part No: 925
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Swim Platforms/Steps->Teak & Poly Swim Platforms
.
Part No: 67902
|
|
|
|
Home -> Fishing -> Tackle Boxes & Lures -> Soft Tackle Boxes
Carry tackle on your back and leave your hands free Designed with a durable internal frame, breathable foam back support and padded shoulder straps to make carrying heavier loads of fishing gear easier. Features: Fold-out lure storage pockets. Waterproof pouch system. Padded horizontal security pocket . 10" sink compartment.
Part No: CT3000BP
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->3" Registration Letters and Numbers
Popular vinyl letters to meet USCG requirementsSelf-adhesive, 3"H vinyl, block, letters and numbers. Meet Coast Guard requirements when applied on contrasting background with proper spacing. Black or white. Sold individually or by the kit. Four of each letter and number for a total of 144 pieces in the kit. Meet USCG requirements when affixed to a contrasting background and properly spaced. Self-adhesive vinyl.
Part No: 3-SCW-P-U
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Valves, Deck Fills, Misc.->Marelon Intake Scoop Strainers
Made of durable composite material and engineered to exceed ABYC and ISO standards.
Part No: 906062
|
|
|
|
Home -> Safety -> Life Jackets -> Commercial Life Jackets->Type I Commercial Life Vest
Designed to extend survival time in rough waters, these vests represent an excellent value in commercial safety gear. Capable of turning an unconscious person to a vertical or slightly backward position in the water. Sturdy, durable foam flotation won’t waterlog. Adjustable strap for a snug fit. USCG-approved and is required on commercial craft. USCG Type: I. Intended Use: Commercial. Features: Reflective patches. Buoyancy: Adult: 23lb. Flotation Material: Polyethylene foam.
Part No: 882000
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses->Deck Brush Accessories
Designed to fit the handles of our Admiral- and Captain-Series Deck Brushes. All have positive-locking, pushbutton, quick-connector sockets that prevent accessories from rotating when in use.
Part No: 581191
|
|
|
|
Home -> Paint & Maintenance -> Winterizing & Storage -> Winter Covers->Heat Shrinkwrap Tape
Heat Shrinkwrap Tape Heat Shrink Tapes are designed for repairing holes in the shrinkwrap, for taping pleats and also for attaching zipper access doors. Heat shrink tape is not designed to be stuck to the hull or other parts of the boats as it will leave an adhesive residue.
Part No: WM-704B
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-2383
|
|
|
