Top Sellers
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
|
|
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
Screen Kit Hinge from LEWMAR
Allows the aluminum framed screen included with Lewmar Trim and Screen Kits to be hinged for easier access to the hatch.
|
45lb. CQR Anchor, Boats 32'–58', 40-5/8"L x 14"W x 17"H from LEWMAR
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
|
Drop-In Hidden Horn Grill - White from MARINCO
Product Features: For use with Drop-In Hidden Horn - Marinco #11095 (and #11079).
|
Adapter—3/4" BSP Female to 15mm (Qty. 2) from WHALE PUMPS
Just cut the tubing to length and fully push the end into the appropriate fitting. The collet automatically secures the hose. If you ever need to alter the system, the connections can be disassembled and reused. All components are manufactured from nontoxic, food-grade materials and are designed to allow unrestricted flow. To gain the advantages of the Whale system, it is not necessary to replumb your entire boat, as unique adapters enable connection to most boat’s existing plumbing systems.
|
|
|
1-7/8" Brass Standard Hasp from ABI
Highly polished brass . Fixed eye (does not swivel). 1"w x 1-7/8"L. Padlock hole diameter 5/16" .
|
Whale Swim 'N' Rinse Transom Shower from WHALE PUMPS
Whale Swim 'N' Rinse Transom Shower Add the convenience of a hot and cold shower to your transom. The easy-to-install shower connects directly to the Whale Quick Connect 15 mm freshwater system. Durable, ABS plastic housing with cover hides the shower when not in use. 7' retracting hose . Water conservation control on the handset . Base plate: 6-1/2" x 11-1/2" . Allow 3-1/2" behind surface .
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
Shower/Mixer Faucet Combo from SHURFLO
This shower mixer has a water conservation button built-in to the handle. Chrome-plated with an easy grip handle, ceramic disc valves and 72" retractable hose. Includes flexible 1/2" NPT connection hoses for easy installation. Material: Brass . Dimensions: 6"H x 6-3/8"W x 7-1/4"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" . Cutout Size: 2-1/2". Manufacturer's Documents Installation Guidelines.
|
|
from LEWMAR, 000SWL from SCHAEFER, 7 from GILL, connections) from MARINCO
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Webbing Ladders
Lightweight, portable, and easy-to-store. Strong 4" cargo webbing provides a soft cradle for your foot for easy, comfortable boarding.
Part No: DSS01W
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks
HD 5,000lb. Drop-Leg Trailer Jack Heavy-duty fixed-mount with a 5,000lb. capacity and a corrosion-resistant zinc finish.
Part No: HD 5000 0101
|
|
|
|
Home -> Plumbing -> Bilge Pumps
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
Part No: BP3740
|
|
|
|
Home -> Engine Systems -> Steering Systems->TFXtreme 4300 BC Performance Cables
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
Part No: CCX43020
|
|
|
|
Home -> Sailboat -> Rigging Products->Stainless-Steel Tangs
High-quality stainless steel tumbled and polished.
Part No: 85-03
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Marine Utility Carts
It’s solidly built from corrosion-resistant, aircraft-grade aluminum and holds 330lb. of gear. Large wheels roll easily over any terrain. Also great around the house and garden! The huge 20" dia. pneumatic tires mean stable, effortless maneuverability over ramps, docks, gravel, and uneven terrain, even with up to 330 lbs. Easy-folding, removable legs and retractable handle make for convenient storage in your car, onboard, or on the bulkhead of your boat, house, or garage .
Part No: 2100
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> Lubricants->Lower Unit Lube Tube
Marine lower unit drain, flush and fill tool. Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefishier lower units. Quick, easy and clean way to change marine lower unit gear lube. For use with all 8- and 10-oz.
Part No: 3704756
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stamped Halyard Shackles
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
Part No: 93-42
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Cooling Systems->Sierra Impellers
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
Part No: 18-3062
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Boathooks
Use it to easily loop your dock lines around posts or pilings. Especially useful at low tide when the piling is too high to reach. Mounts to any boat pole.
Part No: 134
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Spin-On Series Gasoline Fuel Filter/Water Separators
Racor's famous Aquabloc® filter media separates water into the bottom of the drain bowl and ensures virtually 100% removal of water and solid contaminants. Filters come in different sizes for gasoline engines and any rate of fuel flow. Designed for use on the suction side of pump. All filters feature a die-cast aluminum head which is anodized and painted. Standard pipe-to-hose barbs are used for installation. Inlets/Outlets: 1/4" NPT, except 3/8" NPT on 660 series .
Part No: 110A
|
|
|
|
Home -> Engine Systems -> Engine Parts->NGK Spark Plugs
NGK spark plugs are designed to operate over a much wider heat range than ordinary plugs. Each NGK features high alumina ceramics for better heat transfer and electrical insulation. Patented triple gasket sealing process eliminates the possibility of combustion gas leakage.
Part No: 3133
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Bruce-Type Anchors->Stainless-Steel Horizon™ Claw Anchors
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.
Part No: 0058905
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
One combined product eliminates the need to install both a fuel line vent and a surge protector. Inertia of surging fuel drives the surge ball against upper seat, closing the large vent opening and limiting passage to smaller openings, which reduces fuel flow and minimizes spillage. Operates in any orientation within 45° of vertical. Baffles resist water intrusion during normal sea conditions and washdown. Constructed of glass filled polypropylene to withstand oil, gas, alcohol blended fuels.
Part No: 1684-6
|
|
|
|
Home -> Cordage -> Rigging Products->Waxed Whipping Twine
Very strong Dacron twince for whipping and seizing line of all types. Includes a sailmaker's needle . Available in white or brown . 3oz.
Part No: TY-KITBLU
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->Inflatable Boat Seats
Inflatable Boat Seats.
Part No: SSL430800
|
|
|
|
Replacement outboard starter, fits: Mercury 1999-UP 2. 5 DFI . 1996-1999 200 HP V6 DFI . 1998-Up 225 HP V6 DFI . 1999-Up 3. OL V6 .
Part No: 5381
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Shear Pin Kits
Assorted Sizes.
Part No: 550151
|
|
|
|
Troll with ease! Troll multiple lines hassle-free, by using Pompanette's rocket launcher. Rugged and sleek, the rocket launcher comes with 4 Pompanette rod holders, bait tray and drawer. Features: Padded Back. 4 rod holders. Bait tray.
Part No: INT4555DRAWER
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Snap Shackles->Fixed Bail Snap Shackles
All our snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by increasing its elasticity and maximizing the steel's internal strength. A forged snap shackle will deform long before breaking; it will not burst or break suddenly.
Part No: 2472
|
|
|
|
Home -> Sailboat -> Blocks->60mm Racing Fiddle Blocks
For chafe-free, low-friction tackles. Sheave: Anodized aluminum alloy . Ball Bearings: Delrin® . Sheave Size: 2-3/8" (60mm) & 1-5/8" (40mm) . Line Dia. : 3/8" max. . Cheek Material/Finish: Anodized aluminum alloy . Shackle/Strap Type: Swivel with three-way locking, drilled-out head . Cleat: Model with cleat: adjustable arm, aluminum cam cleat .
Part No: 29901639
|
|
|
|
Home -> Shoes & Boots -> Waterproof Boots -> Boots->Aquatech Boots
2mm double-lined neoprene boots are idea for dinghy and small boat performance sailing and offer protection and secure footing in demanding conditions. They feature a wraparound, non- marking natural rubber sole for improved grip, flatlocked seams for comfort and an adjustable strap for maximum support. .
Part No: BLACK-7
|
|
|
|
Home -> Electronics -> Global Positioning Systems->BlueChart g2 Vision, Americas, U.S., Northeast Coast, SD Card
Plug a Vision card into any Garmin 5000/4000, 500/400 Series chartplotter to add premium mapping features and enhanced graphical capabilities. All the new Garmin plotters feature a worldwide basemap that, when optional Vision cards are added, offers the high-detail charting of BlueChart g2, plus high-resolution satellite imagery, above and below the water 3D perspective, auto guidance technology, aerial photographs for real-world reference and coastal roads with points of interest.
Part No: 010-C0708-00
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Stainless Swivel Anchor Connectors
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
Part No: 644.10
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Docks And Accessories->Gull Sweep Gull Deterrent
Keep your decks clean with this proven bird deterrent! This large, 6' diameter, wind-driven rotator keeps gulls from roosting on hardtops, awnings, biminis, flying bridges, sail booms and decks—and eliminates the mess they create. Powered by the slightest breeze, its motion deters even the most determined bird. Installation is easy and so is removal whenever you want to use your boat. Folds in half for compact storage and includes Standard Two-Screw Mounting Block.
Part No: GS-RM
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->Shore Power One-Piece Adapters
Marinco straight adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of dissimilar power configuration. They are integral fittings with no wire between the end fittings. They are high-quality, but do not have sealing boots and are not recommended for use in wet applications.
Part No: 81A
|
|
|
|
Home -> Cordage -> Rigging Products->Spreader Bar Trapeze Harness
Worn by many top sailors around the world, the spreader bar on this harness positions the weight over the hips, reducing painful pressure points and increasing comfort during long periods in the harness. Features the RWO “QRH” pushbutton Quick Release Hook for safer trapezing. Includes multiple adjustment points and a padded lumbar support.
Part No: 4901GCM
|
|
|
|
Home -> Engine Systems -> Engine Parts->200 & 400 Series Spin-On Replacement Elements
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.
Part No: R26T
|
|
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line -> Chafe Gear and Snubbers->Stainless-Steel Rub Strakes
Polished stainless steel guards protect lines against chafe from cap rails, gunwales, etc. Material: Marine-grade stainless steel .
Part No: S11-1800P24
|
|
|
|
Home -> Engine Systems -> Engine Parts->Marine Spark Plugs
High-quality plugs with all the features that make Champion the industry’s leader. Triple-coated shell for excellent corrosion resistance. Triple seal assembly that’s the strongest in the industry. Precision rolled threads that conform to all manufacturers’ specs. * Q and R type plugs only. Some plugs have been redesigned to accommodate the different heat ranges required for reformulated fuel. Before you order a spark plug, be sure to consult the manufacturer’s most current reference guide.
Part No: 938M
|
|
|
