Top Sellers
Fiberglass Boat Repair and Maintenance - Book from WEST SYSTEM
WEST SYSTEM® Technical Books—Guide you through a wide range of projects and repairs These books are chock-full of important of information on recommended product usage, applications, and step-by-step instructions for a wide variety of projects, including blister repair, deck reinforcement, lamination repair, closing of punctures and holes, dry rot repairs and more. Specific step-by-step instructions. Helpful illustrations.
|
423 Graphite Powder - 6 OZ from WEST SYSTEM
423 Graphite Powder is a fine black powder that can be mixed with WEST SYSTEM epoxy to produce a low-friction exterior coating with increased scuff resistance and durability. Epoxy/graphite is commonly used as a bearing surface, and as a coating on rudders and centerboards, or on the bottoms of racing craft that are dry sailed. The epoxy/graphite mixture can also be used in teak deck construction to simulate the look of traditional seams and to protect the epoxy from sunlight. 7 oz.
|
G/Flex 655 Resin 4.75 Gal. from WEST SYSTEM
G/flex 655 Thickened Epoxy Adhesive comes with a thickening agent already added. G/flex offers important features: Toughness and Flexibility G/flex has been toughened. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. Bonds to wet and damp surfaces G/flex has the ability to glue damp woods.
|
#810 Fillable Caulking Tubes from WEST SYSTEM
These applicators are great for injecting large amounts of epoxy, laying a lengthy bead of epoxy or making fillets. Large-volume applicators for use with a standard caulking gun. . Suitable for refilling during continuous use. Should be disposed of after epoxy cures. . Holds approximately 10 fl. oz. . Package of 2.
|
#809 Notched Spreader from WEST SYSTEM
4'' x 4'' plastic spreader with 1/8'', 3/16'' and 1/4'' notches on three sides for quickly applying modified epoxy at a constant thickness.
|
Spring Loaded Ring Pull, Square 2 x 2 3/8" from WEST MARINE
Spring-loaded ring immediately returns to flush when released. Type 304 stainless steel . Size: 2 x 2 3/8" .
|
|
|
Antifreeze, -100 Engine & Water System - Gallon from SEAFIT
West Marine Pure Oceans -100° (-73°C) Marine Antifreeze provides the ultimate in extreme cold weather and corrosion protection for drinking water systems and all engines. Its premium additive package prevents corrosion of aluminum, copper, brass and solder, but will not harm rubber, seals or hose materials. Provides burst protection to -100°F (-73°C) and freeze protection within a range of -58°F to -63°F (-50°C to - 52°C).
|
2-Tank System, 30/35” Gauge from HART SYSTEMS, INC.
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
|
Rejuvenate 2-Cycle Engine Oil, Pint from MERCURY MARINE
Rejuvenate is unlike anything on the market today. It rolls back the clock on engines by quickly removing performance robbing carbon deposits while stabilizing fuel. Powerful detergents remove carbon deposits on piston skirt, crowns and under crowns, power valves, cylinder intake, exhaust and heads. For air-cooled or water-cooled 2-cycle engines with premixed fuel or oil injection systems.
|
Fillet Spoon Knife 12 1/2" from WEST MARINE
West Marine's Fillet Knives have been developed with real anglers in mind. Highest-quality surgical stainless-blades are molded into non-slip rubberized soft grip handles for maximum sharpness, comfort and safety. Tang hilt protects your hand. Bright orange plastic boosts visibility in low-light conditions. The spoon model makes scraping out entrails and blood veins easy and mess-less.
|
West Marine 1000/Offshore PFD Rearming Kit from WEST MARINE
West Marine 1000/Offshore PFD Rearming Kit Style: Manual. Cylinder Weight: 33g. Cylinder Neck Diameter: 1/2" bayonet. Inflator Type: Secumar 401. Kit Contents: Cylinder with seal indicator. PFD Brands Commonly Used With*: West Marine 1000/Offshore PFD . Inflator Number: 401. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
|
|
Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
|
TC-W3 100% Synthetic 2-Cycle Outboard Oil from PENNZOIL
This high-flash, ashless 2-cycle engine oil with biodegradable formulation meets or exceeds 2-cycle outboard manufacturer's warranty requirements. It provides excellent lubricity and wear and rust protection in both pre-mix and injection systems. Exceeds NMMA requirements.
|
|
from HARKEN, 2" from SEAFIT, from WEST SYSTEM, Bulk from EVERCOAT
|
|
Home -> Engine Systems -> Fuel Tanks
3/8 NPT X 3/8" Aluminum hose barb with male threads.
Part No: 033443-10
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
Great for boats with small transoms. Includes a unique bracket for attaching to most angled or curved transoms in an area only 12"W x 6. 5"H. Both steps fold down for boarding.
Part No: 18017:01
|
|
|
|
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
Part No: 40235
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->Fiberglass Boat Cleaner 920
Removes rust, exhaust, oil, grease, and oxidation stains from fiberglass. Restores the original color quickly without hard rubbing or buffing, leaves a chemically clean surface to which waxes can bond. Use with fiberglass boat wax or heavy-duty paste Fleetwax . Made in U. S. A.
Part No: 920 1/2 GALLON
|
|
|
|
Home -> Engine Systems -> Engine Parts
Installs on outlet line and shows when to change filters by indicating an increase in suction. Complete kit includes gauge as well as male and female fittings for installation.
Part No: 1606B
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Portable Fuel Tanks->Gas Caddy
Move 28 gallons of Gas in our smooth-rolling caddy Store and transport fuel safely on docks or onboard. Gas Caddy holds 28 gallons of fuel. Includes 10' of UL Approved hose with static wire, molded hose brackets, UL Approved spring loaded nozzle, 3/4" UL Approved ball valve, aluminum non sparking axle, pneumatic tires with nylon bearings, nylon wheel hubs, vented cap and a molded-in baffle for strength & durability. All Caddies bear the UN Marking, “UN3H1W. ” Color-coded red.
Part No: P93-2400
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass
Complete kit for a custom color matchYour complete solution for color-matching gelcoat and making minor repairs. Includes verything you need to make minor surface gelcoat repairs. Kit includes:1/4 pint of premium gelcoat paste. 1/4 oz. liquid hardener. six tubes of coloring agents (white, black, yellow, brown and blue). mixing cup & mixing sticks. release film. cleaning solvent.
Part No: 100668
|
|
|
|
Home -> Safety -> Life Jackets
Keep extra lifejackets contained & easy to find Keep your life jackets readily accessible and protect them from damage while not in use with our bright, sturdy storage bag. We use hook-and-loop closures because zippers in a marine environment tend to freeze-up when least convenient. The fabric is heavy-duty fiber-reinforced vinyl, plainly marked for instant identification in an emergency. Accommodates 4–6 adult life jackets (depending on style).
Part No: SG-18
|
|
|
|
Home -> Safety -> Life Jackets -> Life Jacket Accessories->Inflatable PFD Rearming Kits
Inflatable PFD Rearming Kits.
Part No: V86000-85202Z
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Trim Tabs
Automatic controls for your Bennett Trim Tab system Give your trim tab system real smarts! The Auto Tab Control dials in the perfect running attitude. Just turn it on and it does the rest. Constantly monitors your boat's position and uses your trim tabs to maintain a perfect cruising attitude. Saves fuel and creates the perfect ride .
Part No: AC3000-SV
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->Orpine Boat Soap
Fresh pine scent!Replaces musty mildew odors with a pleasant fresh pine scent. Just one ounce in three gallons of fresh or saltwater will clean a 45'L boat. Biodegradable. Biodegradable.
Part No: OP8
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Dock Line
The easiest docking you've ever done! The 4' Stretch 'N Slide dock line stretches to 8' long and has 7 individual loops, so you'll always have the perfect length for easy tie up. Secures your boat to the dock in seconds.
Part No: SNS-B
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Replacement Strainer Bases for Rule Bilge Pumps
Original replacement strainer base for your Rule Bilge Pump.
Part No: 279
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Maxxflow Drains, Barbed
Flush head fits most standard showers and allows complete drainage, decreasing the likelihood of clogging.
Part No: 14142
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Hydrofoils->SE Sport Performance Marine Hydrofoils
Especially good for deck boats and pontoon boats Adding this hydrofoil gives you a whole new level of control. Corner tighter, defeat cavitation and prop blow out. The patented sleek shape is rated the fastest hydrofoil plate in its class by independent testing. Narrow footprint translates to less resistance drag in the water for greater speed and lower rpm. Maintains top end speed smoothly and pops you out of the hole quicker. Turn a sluggish deck/pontoon boat into a sharp-turning machine.
Part No: 71615
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->G/Flex 650 Epoxy
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. G/flex offers these important features: Toughness and Flexibility G/flex has been toughened. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. .
Part No: 650-CH
|
|
|
|
Home -> Plumbing -> Freshwater Systems
Complete with spray nozzle, polished-chrome deck holder and 6' heavy-duty white hose. ON/OFF trigger allows for intermittent water flow or continuous spray.
Part No: 135-0011-WH
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Fiberglass Cloth
Suitable for a wide variety of building jobsMedium-density (6oz. ) E-glass. Use with polyester or epoxy resin for light building jobs, covering large areas or reinforcement when laying up or repairing a damaged area. Most commonly used fabric for repair and light building jobs. Medium-density (6oz. ) fiberglass cloth is ideal for covering large areas.
Part No: 100906
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Hose Reducers, Barbed
Nylon Hose Reducers, Barbed.
Part No: 139951
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Git Rot Penetrating Epoxy
Easy-to-use epoxy rescues dry-rotted wood from oblivionSoaks into wood fibers and restores strength to rotten sections. By drilling small holes into fiberglass laminations, underlying wood can be saturated and much of its original strength can be restored. Can be sanded, painted, drilled, tapped and is compatible with most sealants and paints. Recommended Usage: Inject into dry-rotted wood, wood deck or hull cores. Coverage: Volume required for saturation—about half the volume of rotted wood.
Part No: 1065
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware->Travel and Driver's Mugs
Wide-bottom stainless-steel vacuum travel mug is safe to take anywhere. It has a non-skid bottom which makes it almost spill-proof. This mug has a sip-through top and can be used for hot and cold beverages. Stainless-steel, vacuum driver’s mug is designed specifically to fit securely in most cup holders. This mug holds your favorite hot or cold beverage, has a secure sip-through top and stays cool to the touch. Travel style wide base Drivers style cup-holder size base.
Part No: CG-KFD-ISM4
|
|
|
|
Home -> Sailboat -> Rigging Products->Sail Gaskets With Ball Ends
Securing your mainsail to the boom is simpler and quicker when you use sail lashes instead of conventional ties. Dual lengths of durable, UV-resistant polyester plastic cord have polyethylene ball ends with brass stops and damping rings. Color-coded balls.
Part No: 067116
|
|
|
|
Home -> Cordage -> Rigging Products->Sail Slugs
Available with plastic or nylon/stainless bails.
Part No: PA017/5
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
Quickly and safely removes stubborn fecal stainsRemoves stains that result from bird, and in certain locals, spider droppings. Safe for all surfaces. Meets EPA National Clean Marina guidelines. 22oz.
Part No: 892261000802
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Gas Deck Fills
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.
Part No: 1324DP0BLK
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
An 80W90 synthetic gear lube that protects high-performance lower units in extreme operating conditions. Highly recommended for engines over 100hp. Meets or exceeds API MT-1 and GL-5 ratings.
Part No: 3704624
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->Simple Green Marine
Here's a dependable cleaner/degreaser for your boatEasy to use just spray and wipe for spot cleanups. Cleans grease, oil, dirt and stains. Safe for fiberglass, painted surfaces and vinyl. 20oz.
Part No: 19520
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
This compact unit with galvanized exterior is an improved version of its predecessor, the DE-451. For starters, it’s nearly 10% quieter. Its corner-mounted compressor is more secure. Hinges, latches and shelves are stronger, freezer shelf is larger and reversible door affords flexible installation. Removable, black door panel included. This refrigerator fits into the same cutout as the older, DE451 version; making an update/upgrade easy. Overall size: 20-3/4" x 19-3/4" x 23".
Part No: DE0051
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes
Product Features: For use with Drop-In Hidden Horn - Marinco #11095 (and #11079).
Part No: 11090
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Small Boat Furling Kits
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
Part No: 434
|
|
|