Top Sellers
Quicksilver Gear Lube Pump from MERCURY MARINE
Fits all models except Mercury Mariner 2. 2, 4 and 5; Mariner 2, 4, 5, 15, 30, 40 (Japanese origin).
|
Shrink Tape, 2" x 180', Blue from DR. SHRINK
Heat Shrinkwrap Tape Heat Shrink Tapes are designed for repairing holes in the shrinkwrap, for taping pleats and also for attaching zipper access doors. Heat shrink tape is not designed to be stuck to the hull or other parts of the boats as it will leave an adhesive residue.
|
Crab Pot Puller from ENDURANCE MARINE
This powerful workhorse makes hauling prawn and crab pots quick and easy. Designed for high-speed retrieval with a robust 1. The heavy-gauge, marine-grade aluminum frame is powder coated for corrosion-resistance and can handle loads up to 150lb. The included foot control switch provides safety, ease of use and allows both hands free to bail line. Engineered to mount on the Scotty downrigger mount #1023, Model 435050, found on page 922. Stainless-steel internal shafts, fasteners and hardware.
|
|
|
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
Speedometer Kit 80mph, 20-80mph, Includes pitot, 20' tubing, Dia, 3.78", Mounting Hole Max/Min, 3.41"/3.44", D 2.7" from TELEFLEX
White dial, black numerals, black pointer with fire-orange tip. Scratch-resistant curved glass lenses with polished stainless steel, near flush bezels. U. S. and metric scales with ISO symbols .
|
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
A popular choice for gas and diesel inboard engines, White Premier instruments feature white dials with modern black and blue graphics and superior light pipe illumination. When illuminated, black dial grads and pointer become red. Fog-resistant design for enhanced readability.
|
SeaStar Helm Seal Kit from TELEFLEX
Replacement shaft seal kit HS5176 fits various post-1990 SeaStar 1. 4, 1. 7 (I), 2. 0, 2. 4 (II), SeaStar Pro and SeaStar helms.
|
2-Tank System, 30/35” Gauge from HART SYSTEMS, INC.
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
|
Ultra Blue Three-Strand Line, 1/4" Dia., 1,700lb. Breaking Strength from SAMSON ROPE
Ultra-strong line outlasts polypro two to one Made from bi-polymer olefin fiber, ultra-strong Ultra Blue is 30%–35% stronger than polypropylene and has more than twice the wear life. UV light resistance is excellent, it is easy to grip and it floats.
|
AC 36-Position Circuit Breaker Panel, 27 Circuit Breakers, 14-3/4" x 11-1/4" from BLUE SEA SYSTEMS
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
|
Red/Green (for port, starboard and bi-color nav. lights) from DR. LED
Aqua Signal series 25 navigation lights LED replacement bulbs. 2nm brightness. Base Type: Gold plated dimpled festoon. *Click here for the Dr.
|
|
SD from TELEFLEX, Blue from DR, 2"W from ATTWOOD, 30 Series from TELEFLEX
|
|
Home -> Plumbing -> Fittings & Valves->Stainless Steel Deck Fills
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
Part No: 99M 6123C
|
|
|
|
High-quality, marine-grade mats will add spice to any deck or door. Made from plush carpet that is waterproof, stain- and fade-resistant. Mats are mold- and mildew-resistant and feature a nonskid rubber backing.
Part No: 44000
|
|
|
|
OIL PRESSURE, 0-80 PSI AMEGA 2.
Part No: 57903P
|
|
|
|
Home -> Engine Systems -> Engine Parts->Replacement Fuel Water Separator Elements
Remove harmful contaminants without filtering detergent additivesRemove harmful contaminants without filtering detergent additives. Engineered for long life, low restriction and efficient filtering performance.
Part No: 18-7931
|
|
|
|
Home -> Paint & Maintenance -> Winterizing & Storage -> Winter Covers->Heat Shrinkwrap Tape
Heat Shrinkwrap Tape Heat Shrink Tapes are designed for repairing holes in the shrinkwrap, for taping pleats and also for attaching zipper access doors. Heat shrink tape is not designed to be stuck to the hull or other parts of the boats as it will leave an adhesive residue.
Part No: WM-704B
|
|
|
|
Home -> Engine Systems -> Engine Instruments -> Engine Instr. Components->Driftwood Instruments
Light grey dial, black graduations and numerals, white pointer staff. Scratch-resistant curved glass lenses with black, near flush bezels. U. S. and metric scales with ISO symbols where appropriate.
Part No: 61552P
|
|
|
|
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
Part No: 40235
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass
Keep onboard for use when neededUse to strengthen, repair, and rebuild fiberglass, metal, plastic, and most woods. Includes 8oz. of polyester resin with hardener, 3sq. ft. fiberglass cloth, plastic spread-stick, mixing tray, and instructions. For use above or below the waterline. Strengthen, repair, or rebuild fiberglass, metal, plastic, and wood. Kit includes 8oz. of polyester resin with hardener, 3sq. ft. fiberglass cloth, plastic spread-stick, mixing tray, and instructions.
Part No: 100637
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Cooling Systems->Exhaust Flapper Valves
Heavy duty rubber flapper valve keeps following seas from entering exhaust outlet when moving slowly or stopping.
Part No: 18-4457D
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->Tsunami Bilge Pumps
Versatile Tsunami pumps feature interchangeable, twist-and-lock cartridges that reduce maintenance time. All wires are caulked and tinned to prevent water wicking. Rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents and the compact, low-profile design eases installation in tight spaces.
Part No: 4608-7
|
|
|
|
Home -> Safety -> Flares & Signaling Devices
This waterproof, corrosion-resistant PFD light delivers more than eight hours of intense one-second interval flashes on two AA alkaline or 1. 5V lithium batteries (not included). Waterproof (to 10'), corrosion- impact- and temperature- resistant ABS case Twist "ON-OFF" control can be operated by gloved hands and in adverse conditions Slim, lightweight design. Comes with an adjustabe Velcro® strap and wrist loop Meets USCG (161. Flash rate: 60 ± 10 flashes per minute nominal.
Part No: 3959
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Valves, Deck Fills, Misc.
For use with Groco strainers and deck plates with holes up to 7" apart. Cast bronze with 1/4" dia. stainless steel pins on one side and 5/16" pins on the other. Made in USA.
Part No: SW-2531
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes -> Specialty Cleaners
Quickly and safely removes stubborn fecal stainsRemoves stains that result from bird, and in certain locals, spider droppings. Safe for all surfaces. Meets EPA National Clean Marina guidelines. 22oz.
Part No: 892261000802
|
|
|
|
Home -> Engine Systems -> Control Systems
S-controls In-Series Dual Station Kit.
Part No: 039489-002
|
|
|
|
Home -> Engine Systems -> Engine Parts->Gasoline Filter Spin-On Replacement Elements
Gasoline Filter Spin-On Replacement Elements.
Part No: R11T
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware->Travel and Driver's Mugs
Wide-bottom stainless-steel vacuum travel mug is safe to take anywhere. It has a non-skid bottom which makes it almost spill-proof. This mug has a sip-through top and can be used for hot and cold beverages. Stainless-steel, vacuum driver’s mug is designed specifically to fit securely in most cup holders. This mug holds your favorite hot or cold beverage, has a secure sip-through top and stays cool to the touch. Travel style wide base Drivers style cup-holder size base.
Part No: CG-KFD-ISM4
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Fiberglass Cloth
Suitable for a wide variety of building jobsMedium-density (6oz. ) E-glass. Use with polyester or epoxy resin for light building jobs, covering large areas or reinforcement when laying up or repairing a damaged area. Most commonly used fabric for repair and light building jobs. Medium-density (6oz. ) fiberglass cloth is ideal for covering large areas.
Part No: 100906
|
|
|
|
Home -> Safety -> Man Overboard Gear->Type IV Standard Buoyant Cushions
Conventional throwable cushions meet USCG requirements for Type IV PFDs. Comfortable to sit on or to use as a backrest. Durable fabric covers. Heavy polypropylene straps make them easy to throw. Buoyancy: 18 lbs. Dimensions: 15"L x 16"W x 2. 5"H.
Part No: 807802
|
|
|
|
Home -> Engine Systems -> Engine Instruments -> Engine Instr. Components
The slotted mounting plate means no drilling required for replacement installments.
Part No: 56973P
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> Fuel Additives
Specially formulated to prevent ethanol and non-ethanol gasoline related problems. ValvTect Marine Gasoline Ethanol Treatment is designed to stabilize fuel up to one year, prevent octane loss, control moisture, prevent phase separation, prevent corrosion, clean up carbon deposits and reduce fuel consumption. 12oz.
Part No: VEGA12
|
|
|
|
This compact, easy-to-use reference offers boaters a complete set of full-color navigation charts for the coastal waterway running from Miami all the way to Mobile, including charts for all the major inlets and coastal passages en route. All chart segments are presented at the same scale as the original NOAA charts from which they are reproduced and are arranged in linear flip-chart order as in an AAA trip=map book. GPS waypoints on the charts . Marine facilities listings . Distance tables .
Part No: 0071422102
|
|
|
|
Home -> Sailboat -> Winches -> Winch Repair Parts
Contains 10 pawls and 10 springs.
Part No: BK4512
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Heavy Duty Grab Handles
6" x 3 3/8" with base diameters of 2 5/8".
Part No: F61-9000BR-1W
|
|
|
|
Because they produce only a small amount of heat, these highflux bulbs make ideal replacements for most “third degree burn” halogen reading, map and cockpit lights with bi-pin and bayonetstyle bases. Light is soothing and warm with cutting edge internal circuitry and high-quality U. Power consumption is just 1W (less than 0. 08A!) except for three-watt Model 9980111. For forward pointing reading fixtures only. Application: Works with most MR11 fixtures . Amps: 0. 08A (Model 9980111 draws 0.
Part No: 8001238
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes -> Kits & One Step Product->Cleaner & Wax
One-step processDesigned to remove light-to-medium oxidation, clean, polish and protect fiberglass gel coat and marine topside paints. A unique liquid formulation combines a compound with a special blend of waxes which restore shine and protect in one application.
Part No: 09010
|
|
![Replacement Cap with Gauge from MOELLER]( "Replacement Cap with Gauge from MOELLER")
|
|
Home -> Engine Systems -> Fuel Tanks->Above Deck Fuel Tanks Replacement Fuel Caps
Externally threaded cap fits Moeller tanks 031103, 031106, 031109, 031112, 031212. Scepter cap fits 4158, 4921, 3780 & 3781 tanks. Internal threaded cap fits 31612, 31615, 31515, 31818, 31620 & 31526 tanks.
Part No: 395008
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Transom Mounting Extension Shim
Extends ladder farther off the transom. Use with spacer and face plate included with ladder.
Part No: 99181:01
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
For storing ladder on side coaming or transom. Identical to brackets included with each ladder.
Part No: 99193:01
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
Create a non-stick wax finish for your boatAfter you apply this wax with a soft deck brush, dirt, soot, bird droppings and even fish blood rinse off easily. One application lasts up to two months and protects against corrosion, oxidation, water spots and the effects of the sun. 16oz. provides four applications for a 25' center console boat. Requires no rubbing or buffing. 16oz. 16oz.
Part No: WW16
|
|
|
|
Environmentally safe air horn uses air as a propellant, instead of the traditional gas-filled designs. It's economical too. no more expensive refills to buy. Recharges in seconds with a gas station air pump, air compressor, or any other mechanical compressed air source including hand pumps. Works in all weather extremes and can safely be used or stored near sources of heat. Provides approximately 20 blasts per charge. This loud horn puts out a powerful 120db. Meets all USCG regulations.
Part No: 616
|
|
|
