Top Sellers
Super Sub Pump 500, 500gph from WHALE PUMPS
With a low-profile design and horizontal or vertical discharge positions, these versatile pumps are a great choice for narrow/low clearance bilges where others just won’t fit. Twist-lock assembly/ disassembly makes these pumps easy to clean. Following on the heels of the original award-winning design of the Super Sub 500, the new Super Sub 650 features a built-in electronic switch and increased capacity of 650gph. Port Size: 3/4" . Built-in Switch: Super Sub 500: No; Super Sub 650: Yes .
|
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .
|
Whale Gulper 220 Pump, 12V DC, Draw: 2.4A from WHALE PUMPS
Use this 3. Large 3/4" inlet and outlet valves are cut at 45° angles to minimize flow restriction. Ports rotate to the position you need to facilitate hose connections and it mounts vertically or horizontally—making installation a snap! It can run dry for extended periods without burnout and boasts a large diaphragm that generates up to 13' of lift. Rubber mounting feet reduce noise. Features: Will run dry without damage and pump a mixture of air and water . Large single diaphragm .
|
Super Sub Pump 650 Auto, 650gph from WHALE PUMPS
With a low-profile design and horizontal or vertical discharge positions, these versatile pumps are a great choice for narrow/low clearance bilges where others just won’t fit. Twist-lock assembly/ disassembly makes these pumps easy to clean. Following on the heels of the original award-winning design of the Super Sub 500, the new Super Sub 650 features a built-in electronic switch and increased capacity of 650gph. Port Size: 3/4" . Built-in Switch: Super Sub 500: No; Super Sub 650: Yes .
|
Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".
|
Thru-Deck Mark V Manual Sanitation Pump from WHALE PUMPS
Reliable, high-capacity pumps for emptying holding tanks, bilges, gray water tanks, etc. Nitrile diaphragms ensure long service life. Offered in Surface-Mount and Universal configurations. Universal design may be surface- or thru-deck mounted—and when mounted thru-deck requires Deck Plate with Ring Kit (Model 182438) to complete installation. 16gpm capacity. Use 1. 5" hose. Type: Manual Diaphragm, bulkhead or thru-deck models . GPM: 14. 75 . Macerates: No .
|
Whale Gusher 30, Double Action Twin Diaphragm Pump from WHALE PUMPS
Gusher 30 Pump The Gusher 30 is a double-action pump with twin diaphragms so it will still function if one side becomes clogged. Constructed from epoxy-coated anodized aluminum with a brilliant white finish. Nitrile valves and diaphragms perform well under harsh conditions . Accepts low-resistance 2" hose adapters for maximum performance . 31 GPM @ 70 strokes/min. @ 0 head. . Body: Anodized aluminum .
|
Whale Swim 'N' Rinse Transom Shower from WHALE PUMPS
Whale Swim 'N' Rinse Transom Shower Add the convenience of a hot and cold shower to your transom. The easy-to-install shower connects directly to the Whale Quick Connect 15 mm freshwater system. Durable, ABS plastic housing with cover hides the shower when not in use. 7' retracting hose . Water conservation control on the handset . Base plate: 6-1/2" x 11-1/2" . Allow 3-1/2" behind surface .
|
Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
|
Spares Kit for Whale Gulper 220 Pump from WHALE PUMPS
Parts service and repair kits for Whale Water Systems Units.
|
Gusher 25 Service Kit from WHALE PUMPS
Parts service and repair kits for Whale Water Systems Units.
|
Gusher 8 Mark III Service Kit from WHALE PUMPS
Parts service and repair kits for Whale Water Systems Units.
|
Whale-X 15mm Tubing, Blue (sold per foot) from WHALE PUMPS
Just cut the tubing to length and fully push the end into the appropriate fitting. The collet automatically secures the hose. If you ever need to alter the system, the connections can be disassembled and reused. All components are manufactured from nontoxic, food-grade materials and are designed to allow unrestricted flow. To gain the advantages of the Whale system, it is not necessary to replumb your entire boat, as unique adapters enable connection to most boat’s existing plumbing systems.
|
Adapter—3/4" BSP Female to 15mm (Qty. 2) from WHALE PUMPS
Just cut the tubing to length and fully push the end into the appropriate fitting. The collet automatically secures the hose. If you ever need to alter the system, the connections can be disassembled and reused. All components are manufactured from nontoxic, food-grade materials and are designed to allow unrestricted flow. To gain the advantages of the Whale system, it is not necessary to replumb your entire boat, as unique adapters enable connection to most boat’s existing plumbing systems.
|
Twist Shower, Cold Only from WHALE PUMPS
A refreshing departure from deck shower designs of the past, the innovative Twist offers simple operation in a space-saving, ergonomic design. Spray holes are located in the soft-body handle and a twist of the wrist is all you need to initiate water flow or mix hot with cold. Material: High-impact, glass-filled polypropylene and Nitrile . Dimensions: Side Mount: 4-3/4"dia. x 7-1/2"H (Requires 6"D clearance); Top Mount: 2-5/16"dia. x 7-1/2"D . 2' .
|
|
000SWL from SCHAEFER, 3"L from FORESPAR, from WHALE PUMPS
|
|
Home -> Sailboat -> Winches -> Winch Repair Parts
Contains 10 pawls and 10 springs.
Part No: BK4512
|
|
![Replacement Cap with Gauge from MOELLER]( "Replacement Cap with Gauge from MOELLER")
|
|
Home -> Engine Systems -> Fuel Tanks->Above Deck Fuel Tanks Replacement Fuel Caps
Externally threaded cap fits Moeller tanks 031103, 031106, 031109, 031112, 031212. Scepter cap fits 4158, 4921, 3780 & 3781 tanks. Internal threaded cap fits 31612, 31615, 31515, 31818, 31620 & 31526 tanks.
Part No: 395008
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
.
Part No: G13W
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps->Transom Mounting Extension Shim
Extends ladder farther off the transom. Use with spacer and face plate included with ladder.
Part No: 99181:01
|
|
|
|
Environmentally safe air horn uses air as a propellant, instead of the traditional gas-filled designs. It's economical too. no more expensive refills to buy. Recharges in seconds with a gas station air pump, air compressor, or any other mechanical compressed air source including hand pumps. Works in all weather extremes and can safely be used or stored near sources of heat. Provides approximately 20 blasts per charge. This loud horn puts out a powerful 120db. Meets all USCG regulations.
Part No: 616
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
Create a non-stick wax finish for your boatAfter you apply this wax with a soft deck brush, dirt, soot, bird droppings and even fish blood rinse off easily. One application lasts up to two months and protects against corrosion, oxidation, water spots and the effects of the sun. 16oz. provides four applications for a 25' center console boat. Requires no rubbing or buffing. 16oz. 16oz.
Part No: WW16
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cleats & Chocks -> Chain And Rode Pipes
Accepts up to 3/4" line. Material: Chrome-plated brass . Flange: 4"Dia. I. D. : 1. 75"Dia. .
Part No: C3808-0001
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Cam-Matic Cleat Kits with Fairleads
Micro Cam-Matic cleats are legendary for smooth, positive operation when holding and releasing control lines. Mounted aft of the cam, fairleads allow you to engage and release a line up to 45° on either side of the cam. Mounted ahead of the cam, fairleads allow moving lines, such as small catamaran traveler controls, to lead properly. Cam kits include: Cam-Matic® cam cleat: Pawls open/close easily on ball bearings . Large diameter low-friction guides with stainless steel tubes protect lines .
Part No: 358
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Heavy Duty Grab Handles
6" x 3 3/8" with base diameters of 2 5/8".
Part No: F61-9000BR-1W
|
|
|
|
Because they produce only a small amount of heat, these highflux bulbs make ideal replacements for most “third degree burn” halogen reading, map and cockpit lights with bi-pin and bayonetstyle bases. Light is soothing and warm with cutting edge internal circuitry and high-quality U. Power consumption is just 1W (less than 0. 08A!) except for three-watt Model 9980111. For forward pointing reading fixtures only. Application: Works with most MR11 fixtures . Amps: 0. 08A (Model 9980111 draws 0.
Part No: 8001238
|
|
|
|
Home -> Sailboat -> Rigging Products->Fiberglass Tapered Battens
Made for West Marine, tapered battens for every sail These battens are used by many well-known sail lofts. They are tapered for better sail shape and have protective vinyl tips. Label indicates which end to insert first.
Part No: TAP39X2
|
|
|
|
Home -> Plumbing -> General Purpose Pumps -> General Purp Pump Parts->Repair and Service Kits, Spare Parts
Parts service and repair kits for Whale Water Systems Units.
Part No: AK0553
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
Helps keep your boat fresh and looking like newUnique non-toxic formula provides long-lasting protection to help keep your boat fresh and looking like new. Works on virtually all surfaces above the waterline, including sails, seat cushions, carpeting, canvas, deck furniture, rub rails, showers, boat covers and vinyl. 16. 9oz. 16. 9oz.
Part No: 09065
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Ports
This window track is ideal for window glass or for installing sliding cabinet doors. Each channel groove is slightly (. 005") narrower than 1/4" window glass so there is positive pressure against the glass at all times. It seals out leaks and prevents glass from rattling. Made of B-FLEX marine plastic, it will not crack or discolor. The elevated slide at the bottom of the channel makes windows or doors easy to open and close. Sold in 8' lengths.
Part No: CH-1-08
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories
Heavy-duty stainless steel, combined with a positive-locking butterfly nut, provide a rust and corrosion-resistant hatch adjuster that delivers exceptional strength and holding power. Closed: 12"; extended: 21".
Part No: 7084SS
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Mushroom Heads, Barbed
253 Series Hose tailpipe/Mushroom Head.
Part No: 906032
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Solenoids
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
Part No: 18-5834
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> D & Headboard Shackles->Stamped Halyard Shackles
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
Part No: 93-42
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
Cleans non-skid surfacesDesigned to clean hard-to-reach ground-in dirt and stains on non-skid surfaces. Safe for use on fiberglass, metal and painted surfaces. One Liter (34oz. ) One liter (34oz.
Part No: 09063
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Lock
Construction keeps out debris and protects your valuables against scratching.
Part No: 06112
|
|
|
|
Home -> Safety -> Flares & Signaling Devices->Orion Flare Kit Accessories
12-gauge converter allows 25mm launcher to fire 12-gauge meteors (not shown). Mounting bracket for mounting 12-gauge launcher or 25mm bulkhead canister.
Part No: 957
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Carabiners
Feature spring-loaded, straight gates and are available with or without eye grommet.
Part No: 555.12
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking
The "one-way" locking peg provides secure and reliable mounting and allows the use of up to 1/2" diameter line.
Part No: 1001
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Stainless Steel Louvered Vent 5 x 6
Mount on doors, bulkheads, in the cockpit and on hatch boards. Helps to eliminate mildew. . Pre-drilled for six #8 screws. . Mfr. 's lifetime limited warranty. . Ship 0. 5 lbs.
Part No: S-1391
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Switches
Controls any pump equipped with an automatic float switch. This unit features a black plastic panel. It has a built-in fuse holder and an internally lighted rocker switch with 3 positions (automatic, off, or manual) with the Rule "fail-safe" spring return to "off" from the "manual" position.
Part No: 43
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Maxxflow Drains, Barbed
Flush head fits most standard showers and allows complete drainage, decreasing the likelihood of clogging.
Part No: 14142
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Switches
Clearly labeled "Bilge Pump" so you can find it fast Even somebody not familiar with your boat can find this lighted switch. Constructed of rugged, weather-resistant ABS plastic with built-in fuse holder (fuses sold separately). Three positions (Off/Manual/Auto). Dimensions: 3"W x 2-1/4"H . Capacity: 20A @ 12V DC.
Part No: 7205W
|
|
|
|
Home -> Engine Systems -> Steering Systems
Replacement front seal kits for both front and rear mount helms. HS5147 fits BayStar front mount and SportTilt helms . Contains 3 screws, shaft seal and o-ring seal.
Part No: HS5147
|
|
|
|
Home -> Sailboat -> Rigging Products->Hand Swaging Tools
Swage your own oval sleeves with this cadmium-plated steel tool. Pressure is transmitted to the copper sleeve by tightening two bolts on the tool with a socket wrench.
Part No: NO 2
|
|
|
|
Home -> Engine Systems -> Engine Parts->Standard Spin-On Replacement Elements
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.
Part No: RK 20075
|
|
|
