Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
F8B-9 Direct Bolt-On Engine Cooling Pump, Detroit Diesel OEM from JOHNSON PUMPS
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.
|
Power Pack - Johnson/Evinrude -18-5758 from SIERRA
Replacement part for Johnson/Evinrude Outboard #582453, 583380 OEM #0582452.
|
Ultima Electronic Bilge Switch from JOHNSON PUMPS
The same switch that comes preinstalled on Johnson Ultima Combo Automatic Bilge Pumps. With no moving parts and totally sealed solid state electronics, this mercuryfree switch never corrodes or jams on debris. Activates/deactivates at 2" and 3/4" fluid levels. A three second delay prevents false starts. Rated to handle pumps up to 20 amps at 12V or 24V DC. Activation Method: Solid-state electronic . Dimensions: 2-3/8"H x 2-11/16"L x 1-1/8"D .
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
Engine Spray Paint - Johnson/Evinrude, Light Blue Metallic (1978-87) from MOELLER
Durable, heat- and solvent-resistant acrylic lacquers formulated for use on all outboard and inboard engines, stern drive and lower unit applications. They are color-matched to original OEM colors and are a great way to protect your engine and make it look like new. 12oz.
|
13-1/4" x 17" Propeller for Evinrude/Johnson Outboards from MERCURY MARINE
Three-blade aluminum one-piece propellers for Evinrude/Johnson outboards. 8–15hp, 9. 9–15hp 2–stroke 1974 & up, 8/9. 9/15hp 4–stroke 1995 & up: Model 5026695. 20–35hp, 20hp 1984–97, 25/30hp 1984 & up, 35hp 1976 & up: Models 4744207, 8640492. 40–75hp, 40hp 1984 & up, 65hp 1980–85, 48hp 1987–96, 75hp 1975–85, 50hp 1975 & up, Sprint 1986–92, 55hp 1976–79, Formula E 1986–92, 60hp 1980–85: Models 8640484, 4744173, 4744181. 45–75hp large gearcase, OMC Cobra 2. 3–2.
|
12-1/4" x 15" Propeller for Evinrude/Johnson Outboards from MERCURY MARINE
Three-blade aluminum one-piece propellers for Evinrude/Johnson outboards. 8–15hp, 9. 9–15hp 2–stroke 1974 & up, 8/9. 9/15hp 4–stroke 1995 & up: Model 5026695. 20–35hp, 20hp 1984–97, 25/30hp 1984 & up, 35hp 1976 & up: Models 4744207, 8640492. 40–75hp, 40hp 1984 & up, 65hp 1980–85, 48hp 1987–96, 75hp 1975–85, 50hp 1975 & up, Sprint 1986–92, 55hp 1976–79, Formula E 1986–92, 60hp 1980–85: Models 8640484, 4744173, 4744181. 45–75hp large gearcase, OMC Cobra 2. 3–2.
|
10" x 13" Propeller for Evinrude/Johnson Outboards from MERCURY MARINE
Three-blade aluminum one-piece propellers for Evinrude/Johnson outboards. 8–15hp, 9. 9–15hp 2–stroke 1974 & up, 8/9. 9/15hp 4–stroke 1995 & up: Model 5026695. 20–35hp, 20hp 1984–97, 25/30hp 1984 & up, 35hp 1976 & up: Models 4744207, 8640492. 40–75hp, 40hp 1984 & up, 65hp 1980–85, 48hp 1987–96, 75hp 1975–85, 50hp 1975 & up, Sprint 1986–92, 55hp 1976–79, Formula E 1986–92, 60hp 1980–85: Models 8640484, 4744173, 4744181. 45–75hp large gearcase, OMC Cobra 2. 3–2.
|
Impeller 09-812B - For pump size F6B from JOHNSON PUMPS
More durable, longer lasting replacement pump has a one-piece bronze body and bronze end-plate with a replaceable cam and wear-plate so it can be rebuilt when needed.
|
Impeller article number 09-821B from JOHNSON PUMP
Impeller-Fuel Transfer Nitrile|Impeller-Fuel Transfer Nitrile.
|
12 Gallon Topside Fuel Tank from MOELLER
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 6"H.
|
|
Rating from TAYLOR, 18654A1 from SIERRA, 87"H from MOELLER, L from JOHNSON
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Exhaust Bellows
Seals the exhaust/water flow from the manifold to the exhaust outlet in the drive.
Part No: 18-2750
|
|
|
|
Home -> Safety -> Life Jackets -> Life Jacket Accessories->Inflatable PFD Rearming Kits
Rearming kits are easy to use and will keep your inflatable PFD up to date with replacement CO2 cylinders, bobbins and green inflator pins. Regular maintenance can reduce the possibility of premature inflation.
Part No: MA7172
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Topside Fuel Tanks
Ideal for storage in transom wells and other small areas, these tanks hold their rated capacity and include reserve areas as well. Polyethylene construction with UV inhibitors meet all ABYC and USCG standards.
Part No: 031103
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories->Replacement Gas Struts for Dock Boxes & Hatches
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
Part No: 1837
|
|
|
|
Home -> Cordage -> Rigging Products->Tubular-Body, Stainless-Steel Turnbuckles
Series 03 and 04 include LH upper terminals (unless designated RH).
Part No: 03-113
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories->Replacement Gas Struts for Dock Boxes & Hatches
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
Part No: 1827
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Oil Filter Elements
Replaceable screw-on type canister filter. Fits the 75/90/115 hp.
Part No: 877761Q01
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
Works quickly on stubborn algae and waterline stainsEasy spray-and-wipe application makes short work of a dirty chore. Meets EPA National Clean Marina guidelines. 22oz.
Part No: 892261001007
|
|
|
|
Home -> Safety -> Life Jackets
Keep extra lifejackets contained & easy to find Keep your life jackets readily accessible and protect them from damage while not in use with our bright, sturdy storage bag. We use hook-and-loop closures because zippers in a marine environment tend to freeze-up when least convenient. The fabric is heavy-duty fiber-reinforced vinyl, plainly marked for instant identification in an emergency. Accommodates 4–6 adult life jackets (depending on style).
Part No: SG-18
|
|
|
|
Home -> Safety -> Life Jackets->Rearming Kits and CO2
West Marine SOS Kid’s Hybrid Rearming Kit Style: Automatic. Cylinder Weight: 12g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: SOS Kid’s Hybrid. Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
Part No: V85000-81123Z
|
|
![Scupper Valve Assembly from PERKO]( "Scupper Valve Assembly from PERKO")
|
|
Home -> Engine Systems -> Fuel Tanks
Scupper valve assembly is molded white plastic with soft black flapper valve. Without tru-hull and mounting hardware . For surface mount applicaions .
Part No: 0365DP
|
|
|
|
Home -> Plumbing -> Freshwater Systems
WhiteCap Washdown Faucet Chrome-plated brass faucet is ideal for saltwater washdown systems.
Part No: P-2452C
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Fiberglass Paint Stripper
Fiberglass Paint Stripper is specially formulated to remove paint from fiberglass. Water-washable.
Part No: GAF354
|
|
|
|
Home -> Sailboat -> Rigging Products -> Shock Cord->Super Shock Cords
Unaffected by chemicals, sunlight, salt water and oil. Perfect for cover tie-downs, lashing jibs on deck when the chute is up, etc. Molded elastomers with glass-reinforced nylon hooks always return to original length.
Part No: VALUE PACK
|
|
|
|
Temperature, false-trip-free, AC/DC breakers For use with either AC or DC current. Magnetic circuit breakers are temperature-stable. A false-trip free mechanism prevents breaker from being held with contacts closed during overload. Switch Type: Toggle . Voltage Compatibility: AC, DC . Safety Features: Temperature stable, false-trip free. Housing Material: Plastic Housing . Dimensions: 2" x 1. 64" x . 75" . Terminal Type: Screw .
Part No: 551530
|
|
|
|
Home -> Sailboat -> Sailboat Canvas->Winch / Compass Covers in Sunbrella
Protect winches from rain, dust, and other damaging elements. Made from Sunbrella® with elastic cord in the crown for a secure fit. They make great compass covers, too! Pacific Blue color.
Part No: H338543
|
|
|
|
Home -> Sailboat -> Rigging Products
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.
Part No: 3200
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking
Even a gentle breeze will cause this Great Horned Owl’s head to bob or turn 360°, giving it a fully realistic and fierce look that will scare off pesky birds. Just fill with sand through the hole in the base, replace included plug and place it on deck. Or, remove the bottom plug and place it on a pole.
Part No: RHO-4
|
|
|
|
Home -> Engine Systems -> Engine Parts
Lower Unit Seal Kit.
Part No: 18-8362-1
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail -> SS Rail Fittings->Elbows
Bow Rail and Handrail Replacement Products Stainless steel fittings are made from high-quality cast and polished 316 stainless steel. Chrome Zamak fittings are made from double-chrome-plated zinc. Fittings are drilled and countersunk for #10 fasteners and include 1/4"-28 stainless set screws. Type 304 stainless steel tubing is TIG (ultra high heat) welded, polished and buffed.
Part No: F15-0176-1W
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring
Durable polypropylene rope through a solid foam float has ample bright at one end for boathook pickup. Galvanized thimble at opposite end accomodates pennant from mooring buoy. Red band makes it more visible Made in U. S. A.
Part No: 1203
|
|
|
|
Home -> Plumbing -> Bilge Pumps
Interchageable, twist-and-lock cartridges reduce maintenance time and even enable an angler to switch cartridges between an aerator and bilge pump. The rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents.
Part No: 4622-6
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories
The 5' braided handle section is attached to 70' of 12-strand polypropylene line.
Part No: 6040.5.00.1
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->Spray Nine All-Purpose Cleaner
All-purpose cleanerHeavy-duty all-purpose cleaner and degreaser is nontoxic, nonflammable and biodegradable. 25oz.
Part No: 26901
|
|
|
|
Home -> Casual Apparel -> Swimwear->Beer Can Swim Trunks
Lightweight swim trunks with real pockets! Sporty, lightweight, quick-drying trunks have cargo side pockets and secure zip pocket on the inside waistband. Imported . Men’s sizes M-XXL .
Part No: KHAKI-XL
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses->West Marine Self-Coiling Hoses
Featuring an improved flow rate and field-serviceable couplings! With an improved flow rate of 360gph, this hose delivers a powerful stream of water to make deck and boat wash-downs quick and easy. In the unlikely event of a rupture, the couplings can be removed with common hand tools, the hose shortened and the couplings replaced, which is a big advantage if you happen to be offshore! 90% usable length. Field-serviceable couplings. Strain relief at hose connection end'. 360gph flow rate.
Part No: HS1500W
|
|
|
|
Chesapeake Bay and the Intracoastal Waterway to Florida The Mid Atlantic Waterway Guide is updated annually to provide the most comprehensive and current data available. Information like marina listings, distance tables, cruising tips, repair yards, significant harbors, restaurants, rules of the road, customs, mail drops, pump-outs, holding tanks, and bridge schedules. 5” x 11”, spiral bound and 512 pages. These guides also include detailed coast information on the below locations.
Part No: MID-ATLANTIC 08
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG-Series Strainer Parts & Repair Kits
ARG-Series Strainer Parts & Repair Kits Baskets: Stainless steel or nylon. Sight glass.
Part No: ARG-2
|
|
|
|
Produces orange smoke that’s visible for up to five miles during the day. USCG approved for daytime use only. Signal Type: Orange smoke hand flare . Burn Time: One minute . Deployment Method: Match strike igniter . Type Approval: USCG daytime .
Part No: 956
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Nautilus Combination Lock
Set your own easy-to-remember combination on these padlocks with four-pin tumblers. You set the combination using the key provided. All brass internal components and a stainless steel shackle for superior corrosion protection. Type: Combination . Combination Type: Reset-able four tumbler . Material: Brass body and internal components, solid stainless shackle .
Part No: 15812
|
|
|
