Top Sellers
Scotch General Painting Masking Tape #2050 - 2" from 3M PRODUCTS
Use in a wide range of painting applicationsGeneral-purpose. Not for critical or extended outdoor use. Recommended Usage: General purpose masking or binding tape; adheres to previously painted or varnished surfaces . Material: Crepe paper with rubber resin adhesive . Removal Time: Three days .
|
PAR-Max 4 Water-System Pump, 12V from JABSCO
Flow rate: 16. 3 Litres/min (4. 3 gallons/min) Self-priming from dry up to 2. 4m (7. 8ft) Smooth flow. Dry running capability. Soft noise absorbing mounts. Snap-fit port fittings. Corrosion resistant materials. Meets USCG Regulation 183. 410 and ISO 8846 MARINE (ignition protection).
|
High Gloss Gelcoat Compound Gallon from 3M PRODUCTS
Leaves a high gloss finish without wheel or swirl marksRemove fine scratches from production gel coat. Unique formulation reduces slinging while buffing and leaves a high gloss finish without wheel or swirl marks. Contains no wax or silicone.
|
303 Aerospace Protectant - Pint from 303 PRODUCTS
This is the maintenance product manufacturers recommend most. Only `303’ beautifies as intensely, protects as powerfully or lasts as long. Powerful UV screening protection for colored gel-coat fiberglass, inflatable boats, vinyl, clear vinyl (isinglass) windows, rubber, plastics & leather. Spray on/wipe dry. Treated surfaces repel dirt, soiling, staining, water spots, salt water and mildew.
|
Standard Capacity Boji Water Softener, 5" x 24" from GENOVA PRODUCTS
Softens your water supply, yielding water that tastes fresher, is less corrosive to onboard plumbing and leaves fewer unsightly stains and water spots. Consists of a PVC cylinder containing a special Ion Exchange Resin that attracts hard substances in water (iron, calcium, etc. Complete kit includes the Boji Softener, a prefilter housing with activated carbon filter, 36" hose to connect Boji to prefilter, 3/4" hose fittings to plumb into water supply and molded integral feet.
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
Rope Deck Pipe from SUNCOR
Accepts up to 3/4" line. Material: Chrome-plated brass . Flange: 4"Dia. I. D. : 1. 75"Dia. .
|
303 High Tech Fabric Guard, Pint from 303 PRODUCTS
Excellent protectant for Sunbrella upholstery and breathable foul weather gear The only repellency product recommended by and for Sunbrella. Restores lasting water repellency to marine canvas. Stops leaks and protects against soiling and water and oil-based stains. Resists mildew formation and UV sun damage. Spray on, let dry. One pint treats 75–100 square feet of marine canvas. Also a great choice for fabric upholstery, carpeting and breathable foul-weather gear.
|
Wet/Dry Sandpaper (AO) - P500A-Grit from 3M PRODUCTS
3M Imperial Wetordry Sanding Sheet, 9" x 11" Used in wet sanding, fine featheredging or last final sanding step before priming. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product. 500G.
|
Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .
|
101 Polysulfide Marine Sealant - White, 10 OZ from 3M PRODUCTS
Adhesive/sealant for a wide variety of materialsOne-part polysulfide product seals joints between similar and dissimilar surfaces wood, fiberglass, metal and glass above and below the waterline. Non-sagging, non-shrinking and permanently flexible. Excellent resistance to weathering. White. Recommended Usage: Seals mechanically fastened joints, above or below water; fiberglass, wood, metal, most plastics. Cure Time: Tack free: 5 hrs; complete cure in 14-21 days; remains permanently flexible.
|
Stretch 'N' Slide Dock Line from GREENFIELD PRODUCTS
The easiest docking you've ever done! The 4' Stretch 'N Slide dock line stretches to 8' long and has 7 individual loops, so you'll always have the perfect length for easy tie up. Secures your boat to the dock in seconds.
|
Windshield Screw Cover Foam, 5/8"H x 1-1/4"W x 8'L from TACO PRODUCTS
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.
|
|
|
Universal Bungee with Plastic Coated Hook Ends from STARBRITE
Natural rubber core covered with polyethylene braid is rot proof, UV-resistant and long-wearing plastic coated steel hooks.
|
|
from STARBRITE, from DUCKY PRODUCTS, 4" from SUNCOR
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Diamond Pad Eye 3-1/4"
Diamond Pad Eyes. Heavy-Duty, one-piece precision casting.
Part No: C3702-0000
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives->Marine Grade Silicone Sealant
Formulation: One-part silicone sealant Recommended Usage: Lexan®, Plexiglass™, gelcoat, fiberglass, glass, wood, metal, rubber, and vinyl Material Incompatibilities: None, compatible with acrylics; not as strong as polyurethane Cure Time: Tack free: 1 hr; complete cure: 24 hrs Cleanup: Soap and water Removal: Mechanical removal. Material Incompatibilities: None, compatible with acrylics; not as strong as polyurethane. Cure Time: Tack free: 1 hr; complete cure: 24 hrs. Cleanup: Soap and water.
Part No: 08017
|
|
|
|
Home -> Engine Systems -> Engine Lubrication->Premium 4-Cycle Heavy Duty Engine Oil
Exceeds OEM requirements— will not void engine warranty. Recommended for engines requiring API CF-2 level performance. Exceeds warranty requirements for all diesel and gasoline engines specifying SAE 30 or SAE 40 grade and API service classifications including Caterpillar, Cummins, Detroit Diesel, Mack, Navistar, Volvo and Mann. Heavy-duty formulation minimizes engine wear to provide long engine life. Exceeds Mack EO-K/2 and Allison C4 specifications and CID A-A-52306A requirements .
Part No: 3704814
|
|
|
|
Home -> Sailboat -> Rigging Products->Ripstop Nylon Tape
Fix sail tears with this high-strength nylon tape High-strength nylon. Adhesive-backed.
Part No: PJ601WT
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->Plastic Restorer & Plastic Polish
Restore clarity and shine to exterior plastic, including polycarbonate, Lexan and acrylic hatches and windows. Use Plastic Restorer to remove hazing and stains. Follow up with Plastic Polish to remove minor imperfections and create a high-gloss shine. 8oz.
Part No: 09095
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Striping Tape->Solid-Color Striping Tape
Great for use along the waterline or as an accent along the gunnelsThese self-adhesive vinyl accent stripes liven up the look of any boat. Vibrant, long lasting colors add just the right touch of pizzazz to your boat's exterior, changing it from drab and ordinary to bright, clean and beautiful. Sold in 50' rolls.
Part No: 1-BLUE
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Garboard Drain Plug/Replacements
Cast brass construction Flange diameter is 2" and is drilled and countersunk for #8 screws Neck depth: 3/8".
Part No: 7553-3
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Honda Fuel Line Connectors
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
Part No: 033501-10
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
Environmentally-friendly formula safely cleans marine canvassThe only cleaners recommended by and for Sunbrella®. Dilute for spot cleaning. Safely removes even the most difficult stains and rinses residue free. Non-toxic, non-hazardous formula meets or exceeds EPA standards for biodegradability. Quart. Non-toxic, non-hazardous formula meets or exceeds EPA standards for biodegradability. Use to pre-clean marine canvas prior to re-treating. The only cleaner recommended by and for Sunbrella.
Part No: 30552
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Boathooks
Polished stainless steel holders for poles to 1. 5" dia. 3. 5" L x 1" W. . . Sold in pairs.
Part No: 0492DP0STS
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
Engineered for air or liquid-cooled watercraft engines or engines which specify the use of API-TC type oils including WaveRunner, Sea-Doo and Polaris watercraft.
Part No: 858035Q01
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang
Superior dry lubrication for moving or stationary parts. Displaces moisture and inhibits corrosion. Fortified with PTFE to provide a micro-thin film that won’t attract dust or dirt. Dries in seconds. Will not stain sails or clothes. Great for mast track, genoa or traveler T-track, headsail grooves, hinges, zippers, headfoils, and sliders.
Part No: 06114
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->Water Spot Remover
Specfically developed to remove hard water spots.
Part No: D1000
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses->Deck Brush Accessories
Designed to fit the handles of our Admiral- and Captain-Series Deck Brushes. All have positive-locking, pushbutton, quick-connector sockets that prevent accessories from rotating when in use.
Part No: 581191
|
|
|
|
Home -> Sailboat -> Rigging Products->Lev-O-Gage Clinometers
The perfect device for attaining an optimum angle of heel. Black bodies with flex tubes and white engraved numerals and an easy-to-read scale.
Part No: 7301-C
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
Removes stains from grassy marine growth, scum lime, and rust stain. . No rubbing required! . Contains no harmful acids, safe and easy to use .
Part No: 092832
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Bilge Pro Replacement Motor Cartridges
In the event of a problem, replacing your cartridge bilge pump motor is easy— provided you keep one of these on hand. Just pop out the old cartridge and pop in the new. Fit Johnson, West Marine Bilge Pro and Mayfair cartridge-style bilge and livewell pumps.
Part No: 28552
|
|
|
|
Home -> Paint & Maintenance -> Winterizing & Storage -> Winterizing Chemicals->-100°F Engine & Water System Antifreeze
West Marine Pure Oceans -100° (-73°C) Marine Antifreeze provides the ultimate in extreme cold weather and corrosion protection for drinking water systems and all engines. Its premium additive package prevents corrosion of aluminum, copper, brass and solder, but will not harm rubber, seals or hose materials. Provides burst protection to -100°F (-73°C) and freeze protection within a range of -58°F to -63°F (-50°C to - 52°C).
Part No: 363798
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid
Reflects spotlights and headlamps for increased night visibility and safety. Use on a variety of surfaces, including metal, wood, fiberglass, plastic and more. 10oz.
Part No: 214944
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Resin Coloring Agent
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.
Part No: 100507
|
|
|
|
Home -> Engine Systems -> Engine Parts->NGK Spark Plugs
**CR9EB *.
Part No: 6955
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Parts for Manual Heads
.
Part No: 18753-0181
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
An 80W90 synthetic gear lube that protects high-performance lower units in extreme operating conditions. Highly recommended for engines over 100hp. Meets or exceeds API MT-1 and GL-5 ratings.
Part No: 3704624
|
|
|
|
Home -> Cabinet & Deck Hardware -> Deck Plates & Storage -> Deck Plates->Screw In Deck Plate
These innovative deck plates provide an attractive, economical way to access horizontal and vertical storage areas. They have two seals and an O-ring for complete waterproofness.
Part No: DPS-6-1-DP
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts->NGK Spark Plugs
NGK spark plugs are designed to operate over a much wider heat range than ordinary plugs. Each NGK features high alumina ceramics for better heat transfer and electrical insulation. Patented triple gasket sealing process eliminates the possibility of combustion gas leakage.
Part No: 4495
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
Fits the replaceable screw-on type canister oil filters found on current Mercury / Mariner 4-Stroke outboards 9.
Part No: 802653Q02
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-2383
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
Safe for use on your inflatable boatSpecially developed for all butyl, hypalon, rubber and vinyl boats and surfaces. Quickly removes oxidation, grease and dirt. Retards dulling and cracking and slows down the aging process of inflatable boats. Removes marks from tar, diesel oil and the soles of shoes. Also great for cleaning fenders and ensures that the surfaces do not become sticky in the sun. 16oz.
Part No: SIBC-1
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Yamaha 1/4 NPT Brass Male Tank Connector.
Part No: 033470-10
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Pumps
Compact, high-pressure hand pump for filling fenders, rafts, footballs, etc.
Part No: 1005
|
|
|
