Top Sellers
|
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
RigTune Pro Digital Rig Tension Gauge from HARKEN
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.
|
Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
|
Impeller Kit - Neoprene (K) 2-1/4x2 from JABSCO
JABSCO Impellers Tough, long-lasting replacement impellers from the inventors of the flexible impeller pump. Use neoprene for most water-pumping applications.
|
|
Gasket 1189-0000 from JABSCO
Jabsco gaskets & gasket kits.
|
24V Diaphragm Bilge Pump, 10.8gpm, 1" Port from JABSCO
Jabsco Diaphragm Bilge Pumps Self-priming design so you can mount the pump in a convenient location. Each includes a Pumpgard pump strainer (except 10. 8-gpm models). 10.
|
|
Centrifugal/Vane Pump O-Ring - 18580, 45710 & 45740 Series from JABSCO
Fits Jabsco: Centrifugal 18580-0000, Reversible Rotary Vane 45710, Rotary Vane 45710-0000 to 02 and 115 Vac Rotary Vane 45740-0000 pumps.
|
Replacement Control Switch from JABSCO
Replacement Control Switch for Jabsco Electric Head Conversion Kit.
|
Electric Head Conversion Kit from JABSCO
Fits Raritan PH or Compact, Wilcox Crittenden Head Mate, Groco HC, Sealand 750 Series, or PAR 29090/29120 Series and virtually any other marine toilet using 3-3/4" diameter bolt circle with a four-hole with a four-hole bowl-base pattern. High Capacity Macerator and Bowl Scavenger Pump . Also converts most toilets with a 4 bolt screw pattern on a 3 3/4" (95mm) diameter bolt circle such as Groco, Raritan, Wilcox Crittenden, Mansfield and Sealand. Flexible Impeller Flush Pump .
|
|
|
C.P. Marine Toilet Bowl and Drain Cleaner from RARITAN
Raritan C. P. cleans potties! This is the only bowl cleaner that can be combined with K. O. It eliminates the worst raw odors from the intake line. Cleans without brushing. Bio-enzymatic.
|
Quiet Flush Electric Head, Compact Size Bowl, 12V from JABSCO
The Quiet Flush head features a very quiet flush cycle just like your household toilet. Incorporates a powerful waste water evacuation pump with built-in macerator. Select normal flush or bowl-fill/bowl-empty flush. Water control solenoid valve with anti-siphon breaker to prevent contamination of potable water supply. Includes 6' hose for connecting to the remote mounted solenoid valve and a siphon-breaker assembly. Port Sizes: 3/4" Hose Barb intake, 1" Hose Barb discharge.
|
500gph 12V Bilge Pump, 1.9A Draw at 12V DC, 3/4" Port, 4"H x 2-3/8"W from RULE INDUSTRIES
An internal computer chip cycles these pumps on every 2. 5 minutes, then quickly shuts them down if no water is detected. Built-in strainer bases snap off to make cleaning easy. Completely submersible, rust-proof, corrosion-proof and ignition-protected. Three-way wiring enables connection to a switch for manual override or indicator light. Small 500gph pump is designed to handle spray and rainwater. Built-In Switch: Yes, cycles every 2. 5 min.
|
|
from HARKEN, SWL from HARKEN, 12V from JABSCO, #ADPRFK24 from RARITAN
|
|
Home -> Engine Systems -> Motor Mounts->4-Stroke Auxiliary Outboard Brackets
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
Part No: 71090:01
|
|
|
|
Home -> Safety -> First Aid & Medical -> First Aid Kits
The Marine Series 1000 is designed to provide the medical supplies you need for coastal cruising when professional medical care can be reached within a 12 hour time period. The floating, foam padded case protects items and its abrasion-resistant, textured rubber bottom keeps case from sliding on wet surfaces. It’s made of 420 denier nylon with durable, water-resistant coating and a water-resistant zipper to seal out moisture. 5"/420 denier nylon with durable, water-resistant coating.
Part No: 0115-1000
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->PAR-Max 4 Water-System Pumps
Flow rate: 16. 3 Litres/min (4. 3 gallons/min) Self-priming from dry up to 2. 4m (7. 8ft) Smooth flow. Dry running capability. Soft noise absorbing mounts. Snap-fit port fittings. Corrosion resistant materials. Meets USCG Regulation 183. 410 and ISO 8846 MARINE (ignition protection).
Part No: 31620-0092
|
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts
Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape. no more varnishing. Comes complete with hardware to attach to any standard 1'' (2. 5cm) stainless rail. Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount.
Part No: 521-100ST
|
|
|
|
Home -> Plumbing -> Bilge Pumps
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
Part No: BP3740
|
|
|
|
The fast and easy way to change your oil With a sealed switch and splash-proof "Shurcote II" seamless motor shell, this pump thrives in wet environments, such as continuous-duty live well (tanks under 35 gallons) or wash down applications. It features a run-dry capability and is designed to not overheat with extended use. Switch Type: Sealed 45 psi pressure switch . Material: Glass-reinforced nylon body and base-plate . Port Sizes: 1/2" NPS male . Dimensions: 5. 4"H x 5.
Part No: 4901-6212
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Filters & Chemicals->Boji Water Softener
Softens your water supply, yielding water that tastes fresher, is less corrosive to onboard plumbing and leaves fewer unsightly stains and water spots. Consists of a PVC cylinder containing a special Ion Exchange Resin that attracts hard substances in water (iron, calcium, etc. Complete kit includes the Boji Softener, a prefilter housing with activated carbon filter, 36" hose to connect Boji to prefilter, 3/4" hose fittings to plumb into water supply and molded integral feet.
Part No: SS4015
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.
Classic Italian styling at an affordable price. Our Folletto wheels feature modern styling that will enhance the look of any power boat. These wheels feature aluminum spoke with polyurethane grips. The 3/4" tapered hub fits most steering systems. Black aluminum spoke. Black polyurethane grip. Burlwood inserts. 13-3/4" Diameter.
Part No: PU021111
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Alternators and Regulators
Simply select one of five preset program choices based on battery type, and the belt size setting that matches your alternator’s drive belt width and alternator output rating. Battery settings include standard and deep-cycle flooded, gel, AGM, and Optima programs. When used with MC-TS-A and MC-TS-B alternator and battery temperature sensors, the ARS-5 ensures even greater charging performance, as well as critical protection for your alternator and batteries. Controls a single alternator only.
Part No: ARS-5-H
|
|
|
|
Home -> Electronics -> Global Positioning Systems->BlueChart g2 Vision, Americas, U.S., Northeast Coast, SD Card
Plug a Vision card into any Garmin 5000/4000, 500/400 Series chartplotter to add premium mapping features and enhanced graphical capabilities. All the new Garmin plotters feature a worldwide basemap that, when optional Vision cards are added, offers the high-detail charting of BlueChart g2, plus high-resolution satellite imagery, above and below the water 3D perspective, auto guidance technology, aerial photographs for real-world reference and coastal roads with points of interest.
Part No: 010-C0708-00
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories
The Stainless Portlight features a highly polished stainless outer frame with a mirror finish quality. The handles and hinge systems are from the Standard Portlight and leave the lens clear of obstructions for a cleaner look. Smoked gray acrylic lens, stainless steel frame. Latches with quick action handles. Friction hinges hold position without stays or straps. Cutout template included. Comes with trim ring, fasteners, template and instructions.
Part No: 393820862
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Paragon Jr. Pressure Water Pump
Paragon Jr. Pressure Water System The Paragon Jr. can handle the demands of multiple outlets, either as a saltwater washdown or freshwater system pump. Includes a 12V bronze rotary pump, pressure gauge, strainer and PST-1 accumulator tank. Solid-state dry-tank shutoff Operates between 20 and 40psi For boats to 45' 7 GPM Draw: 30A starting, 26A running Self Prime: 6' Dimensions: 12"L x 7"H x 8"dia. (pump) 12"L x 8"dia.
Part No: IPS-38
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->Collapsible Box Anchor
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
Part No: SSSBA
|
|
|
|
Home -> Safety -> Man Overboard Gear
It can be used as a lifting sling if the crewmember needs help out of the water . The Lifesling2 system consists of a flotation collar which is a blend of the traditional horseshoe buoy and a helicopter rescue sling. Graphics on the bag illustrate the instructions for recovering a person in the water. Note: This USCG-approved Lifesling2 is for powerboats with a lifting point 10' above the water, and sailboats over 20' LOA. USCG Type: Type V which substitutes for a Type IV . Buoyancy: 21 lb.
Part No: WMLS2
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->57mm Black Magic® AirBlocks®
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
Part No: 1961
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Carts->Kart-Ahoy Dock Carts
Compact, lightweight, affordable cart features 12" plastic wheels that roll smoothly over bumpy docks. Extra cargo baskets can be stacked on top for added capacity. For storage, the plastic basket folds flat and the powdercoat steel handle detaches. Material: Plastic/steel . Maximum Load Capacity: 100lb. . Cargo Area: 2. 71cu ft. . Wheel Type/Size: Plastic, 12" . Dimensions: 23.
Part No: 11200
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Marine Utility Carts
It’s solidly built from corrosion-resistant, aircraft-grade aluminum and holds 330lb. of gear. Large wheels roll easily over any terrain. Also great around the house and garden! The huge 20" dia. pneumatic tires mean stable, effortless maneuverability over ramps, docks, gravel, and uneven terrain, even with up to 330 lbs. Easy-folding, removable legs and retractable handle make for convenient storage in your car, onboard, or on the bulkhead of your boat, house, or garage .
Part No: 2100
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->VC-Offshore Antifouling Bottom Paint
Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon® yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints.
Part No: R3950/1
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis->Boat Guard SST (Self Supporting Technology) Boat Covers
.
Part No: 70307
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Titan Bilge Pumps
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".
Part No: BP4402
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
**Atlantes Diaphragm Pump 24V|**ATLANTES DIAPHRAGM PUMP 24V.
Part No: ADPRFK24
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Horns
White epoxy powder-coated finish over solid brass. Noncorrosive Lexan® diaphragm. 12vDC. . Draws 20 amps max. Includes compressor, air tubing, fittings, and hardware. 5" W x 3-3/4"H x 9-1/2" L.
Part No: 10121
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival
It is designed to protect the Fastfind PLB range from the harsh diving environment. Turned from a solid block of marine grade aluminium, anodised to 25 microns and pressure tested to 150mtrs (500ft), the canister is designed to be opened at the surface allowing quick and easy access. The double ring seal protects the threads providing watertight integrity to 15atm, preventing ingress of sand or other debris, and a convenient nylon clip is provided to attach the Canister.
Part No: 85-754A
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Bruce-Type Anchors->Stainless-Steel Horizon™ Claw Anchors
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.
Part No: 0058905
|
|
|
|
Home -> Safety -> Life Jackets -> Recreational Life Jackets->Ocean Series Hydrostatic Inflatable Life Vests
The Hammar 1F auto inflator is maintenance-free for five years and automatically inflates only when submerged in 4" of water. Designed for comfort with a low profile for maximum mobility. Soft neoprene Comfort Collar™ won’t chafe your neck. Patented SecureZip™ closure system breaks open easily when inflated, is easy to repack and stays closed during rigorous activities. Inflation cylinder is inside the bladder to protect against corrosion. Buoyancy: 35lb.
Part No: MD3183-Yl/Bk/Cr
|
|
|
|
|
Two Year PLUS Product Protection Plan.
Part No: 2 DOP 2000-2499
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Roll Control Devices->Rock 'N' Roll Stabilizer System
This proven, hinged wing design operates without noisy flapper valves for quiet anchoring day and night. Sailors can easily suspend the stabilizer from their boat’s boom or spinnaker pole. Powerboaters can deploy it with the optional telescoping, aluminum outrigger. The outrigger includes Dacron support lines, a soft rubber hull pad, and an anodized mounting boot. Stabilizer includes bridle and storage/carry case. Stabilizer measures 36" x 21" when fully open, which creates 756sq.
Part No: R10-702
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars -> Spinnaker Poles & Gear->Captive Ball Bearing Spinnaker Pole Cars
Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load.
Part No: 3188
|
|
![Piston Lever, Skipper from WILCOX]( "Piston Lever, Skipper from WILCOX")
|
|
Home -> Plumbing -> Fittings & Valves->Wilcox-Crittendon Service and Repair Kits
We stock an extensive selection of parts and service kits for virtually all products. In addition, we can quickly get any part you need to repair your Wilcox-Crittenden, Jabsco, Shurflo, Raritan or Groco equipment directly from the manufacturer through our Special Order department. If you know the part number you need simply order the part using the Model or manufacturer's part number. Visit www. wilcoxcrittenden. com/replacement_parts.
Part No: PO168-40
|
|
|
|
Home -> Engine Systems -> Engine Parts->Gen-Sep Water Separators
Position the water drain from the Gen-Sep just below the water line to eliminate water splash, especially important for nighttime operation. Gen-Sep will remove nearly all of the cooling water from the exhaust. That water can then be drained to a hull fitting just below the waterline, thus eliminating excess noise often created by splashing and pulsating water flow at the exhaust outlet. A slight downward angle is required for both the exhaust outlet and the exhaust gas tube. Dimensions: 10.
Part No: 1020200
|
|
|
