Top Sellers
110V AC Automatic Bilge Pump from RULE INDUSTRIES
The 1800gph pumping capacity and extra-long 24' power cord make this pump great for boats with shore power or protecting basements from flooding during wet weather. Motor and durable housing will last for years on the boat or in the home. 5/8" garden hose adapter. gph: 1800. Draw: 1. 1A@110V AC. Built-In Switch: Yes. Material: Plastic. Dimensions: 7-3/4" x 4-3/4". Port Size: 1-1/8".
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Removable Chafe Gear Wrap, 4', for 3/4"– 7/8" Line from MEGAFEND
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
|
Folding Dock/Raft ladder 3 step from GARELICK
Unique flip-up hinge mechanismUnique hinged ladder flips up and out of the water to prevent marine growth. Features a 10° angle for effortless boarding. Quick-release pins make it easy to remove for storage. 16"W steps have anodized aluminum tread and a curved step to make boarding more comfortable. Overall ladder width is 18". One-year warranty. Wide track 18"W ladder with full width 16" steps. Anodized aluminum heavy-walled 1"dia. tube construction.
|
304 Stainless-Steel Hose Clamp, 3-1/8" to 4", SAE Size 56 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
|
Brushed Aluminum 4-Rod Rack from TACO PRODUCTS
Stylish, brushed aluminum rod storage racks feature slotted rod holders to lock in reels for safe, secure transport. Each holder is 12" long, with a 1. 9" dia.
|
|
|
|
|
Replacement Delrin Roller, 2-1/2" Dia., 1-3/4 Width from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
3/16" Stock Dia. U-Bolt, 1-3/8” Thread Length, 1-3/16" Hole Spacing, 1" Eye Dia. from SEAFIT
Stainless steel U-Bolts have metric threads. The top plate is held in place by small ears that are forged into the U-bolt. Includes matching backing plate. ShWt .
|
Large Funnel - 5GPM, 10"H x 8-1/2"Dia., 100 Micron from WEST MARINE
Fuel/Water Separator These filters were tested by Powerboat Reports (March 2003) and rated better than other more expensive funnels. Teflon-coated, stainless-steel filter separates water and dirt from gasoline, diesel and kerosene fuels. Made from industrial standard electroconductive polypropylene that can be grounded for extra safety. Tested and rated by Powerboat Reports (March 2003) better than other more expensive funnels. Separate water and dirt from gasoline, diesel and kerosene fuels.
|
Super Kart Ahoy from KART-AHOY
Identical dimensions to the Lightweight Dock Cart (Model 412403), but with larger diameter wheels for added mobility and greater loadbearing capacity. Handles 185lb. of payload and boasts 15" wheels. The handle and cargo baskets are interchangeable between the two models. Recommended for freshwater use only. Material: Plastic/steel . Maximum Load Capacity: 185lb. . Cargo Area: 2. 71cu. ft.
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
Mast Hound, 3IN X 4 1/2IN from RONSTAN
A simple effective fitting for terminating wire rigging. 304 Stainless. Fits masts 3" -4. 5" dia. Weight 3. 9oz.
|
|
Plastic, 1" Bulb Dia, 4" from SUNCOR, Dyform Wire - 6MM 1X19, 16Dia, 7
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Diamond Pad Eye 3-1/4"
Diamond Pad Eyes. Heavy-Duty, one-piece precision casting.
Part No: C3702-0000
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking
Using only plantation-grown teak, these fine accessories make life aboard more pleasant.
Part No: 60329
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line->"Dock Buddy" Dock Line
The dock line that stretches Hook one end of the Dock Buddy to your boat cleat . Stretch the other end to dock cleat .
Part No: DB4-B
|
|
|
|
Home -> Safety -> Safety Harnesses -> Safety Harness->ISAF Specification Safety Tethers
Is your safety tether still safe? This tether will tell you Meeting all ISAF (International Sailing Federation) requirements for strength, design and features for sailboat racing, these safety tethers incorporate a lightweight aluminum double-action safety hook and a built-in stress indicator for improved security offshore, whether racing or cruising. The stress indicator features a bright overload flag that is exposed when the tether is stressed to the point of needing replacement (about 900lb.
Part No: 283.SET.A
|
|
|
|
Standard replacement light bulb used in many navigation lights.
Part No: 0337014DP
|
|
|
|
Home -> Sailboat -> Tiller & Rudder
Solid Teak Table Double-Leaf with Fitting Kit, unvarnished.
Part No: 89400283
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Downhaul Hooks
Stainless steel hook with closed perpendicular eye.
Part No: C0179-H008-W
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Sink Drain Fittings
1-1/4" Straight, 3/4" Hose, Plastic.
Part No: 907013
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Rubber Drain Plugs
These expanding rubber plugs are great for live-well tanks, buoyancy tanks on day sailors and small thru-hulls. Made from brass and neoprene. Cam-action lever.
Part No: 7535A3
|
|
|
|
Home -> Engine Systems -> Engine Parts->Plug Boss
Don’t forget to install your trailerable boat’s drain plug and get that sinking feeling! Get the Plug Boss instead. Put the bright red anodized aluminum plug holder in the most logical place possible, on the trailer winch handle, and never forget to reinstall your drain plug when you launch your boat (or remove it when you haul out). Choose a Plug Boss to fit either the 1" rubber tee handle drain plug or a 1/2" pipe threaded bronze drain plug.
Part No: 2402
|
|
|
|
Home -> Engine Systems -> Engine Parts->Drive/Bell Housing Gaskets
A special coated gasket and the correct "O" rings to properly seal drives to the bell housing.
Part No: 64818Q4
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes
Designed for easy installation, this hidden horn mounts from the outside. Compact in size, but capable of 107db loudness. Comes with both black and white snap-on ASA plastic grilles. A weatherproof fabric liner lets sound through, but keeps water out. Prewired for 12V installation. Material: ABS plastic . Loudness dB: 107dB . Design Standards: Meets ABYC specs for boats up to 12 meters . Dimensions: 2"H x 3-3/8"W x 3-1/4"D . Power Requirements: 12 Volts .
Part No: 10079
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes
Product Features: For use with Drop-In Hidden Horn - Marinco #11095 (and #11079).
Part No: 11090
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlass Accessories
Allows you to set up two operation stations for your windlass. A footswitch at the bow and a hand held remote at the helm or two foot switches, it's all up to you.
Part No: 0052507
|
|
|
|
Home -> Engine Systems -> Engine Instruments
Works with oil pressure, temperature, halon extinguishers, etc Use with grounded or ungrounded switches For use with Marine Engine Warning Alarm Kit Steel case measures 1-7/8"D x 1"W x 1-11/32"H Fits panels to 13/64" thick 12V DC .
Part No: 4112-RC-BP
|
|
|
|
Home -> Books & Videos -> Videos & DVDs->Electronic Instruments DVDs
DVD-GARMIN GPS MAP 3006|DVD-GARMIN GPS MAP 3006.
Part No: N1320DVD
|
|
|
|
Home -> Sailboat -> Rigging Products->Dyform Wire Rigging
Control your rig and sail plan more accurately with a low-stretch, high-performance wire strand. Dyform is an essential performance requirement on many racing sailboats and on cruising yachts seeking higher performance and greater margins of safety. It has 30% greater breaking strength and 25% less stretch than conventional wire strand. Wire strands are specially shaped to fill more cross sectional area for greater resistance to elastic stretch. Same corrosion resistance of 316S31 stainless.
Part No: SD19-M06
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil
Why paint when you can wax? If your boating is in low fouling fresh water or cold saltwater, consider new waxing technology instead of anti-fouling bottom paint. An easy-to-use, nontoxic, soft-wax coating for full-season protection. One bottle will cover a 24' boat. Recommended Usage: Fresh or intermittent salt water use; lasts one full season . Clear, nontoxic alternative to bottom paints . Coverage: One pint covers 24' hull . Drying Time: Dries in minutes, overnight curing before launch .
Part No: RM103E
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses -> Scrubbers,Sponges,Buckets
Restore clarity to yellow, hazy or cloudy eisenglass, Plexiglass, plastics, gelcoat and fiberglass the fast and easy way with this kit. Kit includes: 7" diameter. Washable Flitz Buffing Ball for use with any 3/8" drill motor. 1. 76oz. tube Flitz Metal, Fiberglass & Plastic Polish. 1. 7oz.
Part No: PL 31503
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Elbows
Bow Rail and Handrail Replacement Products Stainless steel fittings are made from high-quality cast and polished 316 stainless steel. Chrome Zamak fittings are made from double-chrome-plated zinc. Fittings are drilled and countersunk for #10 fasteners and include 1/4"-28 stainless set screws. Type 304 stainless steel tubing is TIG (ultra high heat) welded, polished and buffed.
Part No: F15-0176-1W
|
|
|
|
Home -> Plumbing -> Bilge Pumps
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
Part No: 407001
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Electric Fuel Gauge Sending Units
These sending units fit the industry-standard bolt-hole pattern and 240-33 Ohm gauges. Internal measurement components will not rust or corrode.
Part No: 035722-10
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Heads
Fits Raritan PH or Compact, Wilcox Crittenden Head Mate, Groco HC, Sealand 750 Series, or PAR 29090/29120 Series and virtually any other marine toilet using 3-3/4" diameter bolt circle with a four-hole with a four-hole bowl-base pattern. High Capacity Macerator and Bowl Scavenger Pump . Also converts most toilets with a 4 bolt screw pattern on a 3 3/4" (95mm) diameter bolt circle such as Groco, Raritan, Wilcox Crittenden, Mansfield and Sealand. Flexible Impeller Flush Pump .
Part No: 37010-0092
|
|
|
|
Simple alternative to installing a second battery for single-battery systems, it ensures ample starting capacity and prolongs battery life. This switch automatically disconnects non-critical loads from a battery when the battery voltage falls below a predefined threshold. Overcurrent, short-circuit and over-temperature protections assure safe and reliable operation. Eliminates contact wear and extends service life up to 1,000,000 On-Off cycles. 200A, 12V. Includes manual override capability.
Part No: 48510
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Inboard, I/O Engine Paint & Outboard Paint
Durable, heat- and solvent-resistant acrylic lacquers formulated for use on all outboard and inboard engines, stern drive and lower unit applications. They are color-matched to original OEM colors and are a great way to protect your engine and make it look like new. 12oz.
Part No: 025454
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Inboard, I/O Engine Paint & Outboard Paint
Durable, heat- and solvent-resistant acrylic lacquers formulated for use on all outboard and inboard engines, stern drive and lower unit applications. They are color-matched to original OEM colors and are a great way to protect your engine and make it look like new. 12oz.
Part No: 025469
|
|
|
|
Home -> Paint & Maintenance -> Winterizing & Storage
Winterize your outboard or sterndrive with this convenient kitUses your existing flusher and a garden hose to winterize your outboard or sterndrive engine, even while it’s on the trailer. Kit includes a five-gallon jug, hose fittings and instructions for winterizing. You supply five gallons of nontoxic antifreeze for each engine. Complete instructions are included.
Part No: 520411
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> Fuel Additives
Specially formulated to prevent ethanol and non-ethanol gasoline related problems. ValvTect Marine Gasoline Ethanol Treatment is designed to stabilize fuel up to one year, prevent octane loss, control moisture, prevent phase separation, prevent corrosion, clean up carbon deposits and reduce fuel consumption. 12oz.
Part No: VEGA12
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Paint Brushes, Rollers->Europa Pure Badger Brushes
For smooth paint and varnish applicationBadger-like bristles have tip “flags” for smooth paint and varnish finishes. For fine finishes. Flagged tips for sharper cutting edge.
Part No: 160383
|
|
|
|
Home -> Engine Systems -> Engine Parts->Exhaust Flapper Valves
Heavy duty rubber flapper valve keeps following seas from entering exhaust outlet when moving slowly or stopping.
Part No: 18-4457D
|
|
|
