Top Sellers
Fiberglass Boat Repair and Maintenance - Book from WEST SYSTEM
WEST SYSTEM® Technical Books—Guide you through a wide range of projects and repairs These books are chock-full of important of information on recommended product usage, applications, and step-by-step instructions for a wide variety of projects, including blister repair, deck reinforcement, lamination repair, closing of punctures and holes, dry rot repairs and more. Specific step-by-step instructions. Helpful illustrations.
|
#809 Notched Spreader from WEST SYSTEM
4'' x 4'' plastic spreader with 1/8'', 3/16'' and 1/4'' notches on three sides for quickly applying modified epoxy at a constant thickness.
|
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
|
|
12 Gallon Topside Fuel Tank from MOELLER
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 6"H.
|
|
Replacement Cap with Gauge from MOELLER
Externally threaded cap fits Moeller tanks 031103, 031106, 031109, 031112, 031212. Scepter cap fits 4158, 4921, 3780 & 3781 tanks. Internal threaded cap fits 31612, 31615, 31515, 31818, 31620 & 31526 tanks.
|
Flo N’ Go Gas Pump from MOELLER
Stop the slosh! Save gas and prevent spills with a precision pump Still filling the fuel tank by pouring from a heavy can into a funnel? Stop the slosh with Moeller's precision Flo'n'Go Pump. Pump gives you more control for clean filling, less spillage, fumes and pollution. NOT available in CARB states due to state restrictions. * Simple, reliable bellows pump. Made of high-density polyethylene plastic. Pumps gas in any direction. NOT available in CARB states due to state restrictions*.
|
Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
|
5 Gallon CARB Kerosene Square Jerry Can with CRC (Blue) from MOELLER
A new generation of jerry jugs, these special fuel containers feature a spill-proof fueling system that meets new, tough ARB regulations in CA, NY, MD, DE and PA. Those environmental regulations prohibit the sale of open, vented fuel cans within the state. Containers are made from HDPE and DuPont’s Selar RB Barrier resin to meet strict permeation requirements. The ECO Spout is easy to use and helps to prevent spills. Fuel flow will automatically stop when the container is full.
|
#810 Fillable Caulking Tubes from WEST SYSTEM
These applicators are great for injecting large amounts of epoxy, laying a lengthy bead of epoxy or making fillets. Large-volume applicators for use with a standard caulking gun. . Suitable for refilling during continuous use. Should be disposed of after epoxy cures. . Holds approximately 10 fl. oz. . Package of 2.
|
#875 Scarfer™ from WEST SYSTEM
Use to create scarf joints like a pro A unique tool designed by Gougeon Brothers for cutting accurate scarf joints in plywood up to 3/8" thick.
|
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
|
Antifreeze, -100 Engine & Water System - Gallon from SEAFIT
West Marine Pure Oceans -100° (-73°C) Marine Antifreeze provides the ultimate in extreme cold weather and corrosion protection for drinking water systems and all engines. Its premium additive package prevents corrosion of aluminum, copper, brass and solder, but will not harm rubber, seals or hose materials. Provides burst protection to -100°F (-73°C) and freeze protection within a range of -58°F to -63°F (-50°C to - 52°C).
|
|
from HARKEN, from WEST SYSTEM, 16" from MOELLER
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Footman’s Loops
Low-profile stainless-steel straps for attaching webbing to flat surfaces.
Part No: C0224-0050-W
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Solenoids
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
Part No: 18-5834
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Oil Filter Elements
Replaceable screw-on type canister filter. Fits the 75/90/115 hp.
Part No: 877761Q01
|
|
|
|
Home -> Fishing -> Tackle Boxes & Lures -> Soft Tackle Boxes
Carry tackle on your back and leave your hands free Designed with a durable internal frame, breathable foam back support and padded shoulder straps to make carrying heavier loads of fishing gear easier. Features: Fold-out lure storage pockets. Waterproof pouch system. Padded horizontal security pocket . 10" sink compartment.
Part No: CT3000BP
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Filters & Chemicals
To ensure clean, fresh-tasting water, consider sanitizing your freshwater tanks and hoses. Utilizing a two-step process with chemistry similar to that used in medical facilities, this sanitizer has been shown to kill more than 99% of bacteria—staph, e-coli and other micro-organisms on surfaces in 60 seconds. Not a water additive, this system is meant for sanitizing freshwater tanks and hoses only. Package contains one 24-ounce bottle of Tank Cleaner and one 24-ounce Bottle of Tank Sanitizer.
Part No: 36662
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters
FILTER Replaces: Mercruiser 35-866171A01 Fits: 350 Mag MPI Alpha/Bravo, 350 Mag MPI Horizon Alpha/Bravo, 350 Mag MPI Horizon MIE, 350 Mag MPI MIE, 496 MAG, 496 MAG H. O. , 5. 0 MPI Alpha/Bravo, 8. 1L Inboard, 8. 1L Inboard H. O. , MX 6.
Part No: 18-7977
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Groco Service Kits and Repair Parts
Groco Replacement Parts and Service Kits We stock an extensive selection of parts and service kits for virtually all products. In addition, we can quickly get any part you need to repair your Jabsco, SHURflo, Raritan or Groco equipment directly from the manufacturer through our Special Order department. If you know the part number you need simply order the part using the Model or manufacturer's part number. If you don't know either number, please call us for assistance.
Part No: GF-376
|
|
|
|
Home -> Engine Systems -> Engine Parts->Water Separating Kit with Fuel Filter
1662576 is a kit for gasoline outboard and MerCruiser models, except 1992 MCM 4. 3L Gen II engines equipped with an in-line fuel filter. 1662550 is an individual replacement element. Model 4531430 is located under the cowl on all Mercury/Mariner V6 outboards, up to 1995, and includes black screw-in sensor. Similar 5037320 is under-cowl filter for Mercury/Mariner V6, 1996 and up, with blue screw-in sensor. OMC model replaces OMC# 502905. Fuel Type: Gasoline. Filtering Efficiency: 25 micron .
Part No: 802893Q01
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters
Prime your fuel line reliably every timeRetrofit this kit to most Racor 1000 or 900 series fuel filters, and you can easily reprime your filter and fuel system. Activate a switch, and fuel is drawn into the pre-screen and pumped through the housing, re-filling the unit. When not in use, the filter pump is bypassed and the fuel/water separator system functions normally. Assembly is only 3. 3" tall .
Part No: RKP1912
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Spin-On Series Gasoline Fuel Filter/Water Separators
Racor's famous Aquabloc® filter media separates water into the bottom of the drain bowl and ensures virtually 100% removal of water and solid contaminants. Filters come in different sizes for gasoline engines and any rate of fuel flow. Designed for use on the suction side of pump. All filters feature a die-cast aluminum head which is anodized and painted. Standard pipe-to-hose barbs are used for installation. Inlets/Outlets: 1/4" NPT, except 3/8" NPT on 660 series .
Part No: 110A
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Fuel Lines & Accessorie->Fuel Hose
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.
Part No: 034313
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".
Part No: 034395-10LP
|
|
|
|
Home -> Engine Systems -> Engine Instruments -> Engine Instr. Components->Universal Electric Fuel Gauge & Sending Unit Kit
Complete kit includes a reliable dash-mount gauge with a black face and white numerals. The triple patented sending unit has an adjustable float arm and U-channel that fits virtually all tanks from 4"-24" deep. Compatible with 12V DC systems with common or insulated ground.
Part No: 90424P
|
|
|
|
Home -> Engine Systems -> Engine Parts
Used to prevent fresh fuel from undergoing degradation and oxidation during fuel storage. For use with 2- and 4-cycle engines. 1fl. oz. treats 1gal. of fuel.
Part No: 858071Q01
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> Fuel Additives
Fuel System Treatment & Stabilizer Prevents fresh fuel from degradation and oxidation. 1oz. treats six gallons of fuel. For two-and four-cycle engines. 16oz. plastic bottle.
Part No: 858072Q01
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Yamaha 1/4 NPT Brass Male Tank Connector.
Part No: 033470-10
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Full-Flow In-Line Ball Valves
These in-line ball valves permit unrestricted flow in all sizes. Each features a compact bronze body, chrome-plated brass ball with Teflon seats for long life, 304 stainless steel handle, bonding attachment screw and a drain plug.
Part No: 99M IBV-1000
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Small Boat Furling Kits
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
Part No: 434
|
|
|
|
Home -> Sailboat -> Headsail Furling
A sleek, snag-free way to lead your furler's lines back to the cockpit. Clamps around the 7/8" or 1" stanchion tubing, so you don't have to drill any holes.
Part No: RF3
|
|
|
|
Recessed fuse contacts, no cover required. Black thermoplastic.
Part No: 46379-10-BP
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Laminated Replacement Tillers
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
Part No: 2900
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->G/Flex 650 Epoxy
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. G/flex offers these important features: Toughness and Flexibility G/flex has been toughened. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. .
Part No: 650-CH
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->G/Flex 655 Thickened Epoxy
G/flex 655 Thickened Epoxy Adhesive comes with a thickening agent already added. G/flex offers important features: Toughness and Flexibility G/flex has been toughened. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. Bonds to wet and damp surfaces G/flex has the ability to glue damp woods.
Part No: 655-CR
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Halogen Replacement Lamps
Keep spare bulbs handy in case of burnouts or breakage.
Part No: 529338
|
|
|
|
Because they produce only a small amount of heat, these highflux bulbs make ideal replacements for most “third degree burn” halogen reading, map and cockpit lights with bi-pin and bayonetstyle bases. Light is soothing and warm with cutting edge internal circuitry and high-quality U. Power consumption is just 1W (less than 0. 08A!) except for three-watt Model 9980111. For forward pointing reading fixtures only. Application: Works with most MR11 fixtures . Amps: 0. 08A (Model 9980111 draws 0.
Part No: 8001238
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Portable Fuel Tanks->Gas Caddy
Move 28 gallons of Gas in our smooth-rolling caddy Store and transport fuel safely on docks or onboard. Gas Caddy holds 28 gallons of fuel. Includes 10' of UL Approved hose with static wire, molded hose brackets, UL Approved spring loaded nozzle, 3/4" UL Approved ball valve, aluminum non sparking axle, pneumatic tires with nylon bearings, nylon wheel hubs, vented cap and a molded-in baffle for strength & durability. All Caddies bear the UN Marking, “UN3H1W. ” Color-coded red.
Part No: P93-2400
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Gas Deck Fills
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.
Part No: 1324DP0BLK
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Gas Deck Fills
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.
Part No: 0126DP0BLK
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Gas Deck Fills
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.
Part No: 1399DP0CHR
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Gas Fill & Tank Vent
Perko Gas Fill and Tank Vent This ingenious plastic deck fill has a vent with a flame arrestor built right into the fill flange. A flip-up cap eliminates the need for a deck key and no ground wire is required.
Part No: 1319DPGBLK
|
|
|
