Top Sellers
Acrylic Canvas Drink Holder, 5-1/8"W x 5-1/8"H x 3-9/16"L from RONSTAN
Ronstan rope bags can be removed and stored inside the boat when not in use; all that remains in sight is the soft white plush side of the loop attachment panel—and no sharp hooks! RF3700 Series Acrylic Canvas Bags Acrylic rope bags have a classic navy style. They are lightweight, water resistant and will retain shape. Made of white, water-repellent PVC with black water-draining polyurethane mesh, these rope bags are extremely durable. Technical features include carbon tubes for easy opening.
|
Series 40 Ratchet Block, Single/Cleat, 385lb. SWL, 3.4oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. " The newest addition to Ronstan’s Orbit range of super lightweight, fiber-reinforced blocks. Ideal for sheet applications on dinghies up to 16' and control line applications for small keel boats. There are two styles of Series 40 ratchet blocks. Many of the top Grand Prix Laser sailors are switching to Orbit blocks.
|
Arrow Style Windvane from RONSTAN
Small boat wind indicators feature quality construction at a fraction of the price of other windvanes, so they are a great choice for junior sailors who might be rough on the equipment. Ronstan's new vanes are balanced for accuracy and molded in UV-stabilized nylon. The aluminum shaft can be removed from the mast bracket for trailering or security. Both the Pennant and Arrow style indicators include adjustable tacking angle arrows.
|
Telescopic Tiller Extension 29" - 48" from RONSTAN
Ronstan tiller extensions feature fluted anodized aluminum tubing for durability and rigidity and a tapered, non-slip Hyperlon grip with ball end. The Urethane universal joint can be removed without tools. Adjustable-length versions feature a fast-action adjustable shaft for additional versatility. 4732913 Aluminum Fixed 24” RF3128 5/8"Tubing Dia. , 1"Grip Dia. , 24"L, 5. 3Lbs. 1133131 Lightweight Aluminum 33” RF3129 5/8"Tubing Dia. , 1"Grip Dia.
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
|
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
Furling Lead Block from RONSTAN
A sleek, snag-free way to lead your furler's lines back to the cockpit. Clamps around the 7/8" or 1" stanchion tubing, so you don't have to drill any holes.
|
Pintle Retaining Clip from RONSTAN
Strong, reinforced nylon fittings have compact profiles and minimal weight. Insert molded nylon bushings provide a firm fit between gudgeon and pintle, and prevent corrosion and fatigue. Constructed for precision performance and dependability. Hole dia.
|
|
|
|
|
Mast Hound, 3IN X 4 1/2IN from RONSTAN
A simple effective fitting for terminating wire rigging. 304 Stainless. Fits masts 3" -4. 5" dia. Weight 3. 9oz.
|
|
from RONSTAN, SWL from SCHAEFER, MWL from WICHARD, 16"L from RONSTAN
|
|
Designed to lay over your boat’s gunnel, and with your choice of design, salutation or admonition, these mats are a great way to protect your gelcoat and greet your guests. Mats feature non-skid backings, are made of heavy marine canvas and weighted at each end to assure that they stay put in a breeze.
Part No: BM-20 NAVY
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Black Rubber Rail Inserts
Rubber inserts add cushioning to your aluminum rubrails. . These fit styles #5, #6 and #7. Rub rails and inserts sold separately. .
Part No: V12-0334BKA50-1
|
|
|
|
Home -> Sailboat -> Blocks->5 & 7 Series Deck Plates with Universal Adapter
Swivel base for deck mounting blocks.
Part No: 704-02
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->Replacement BilgeKleen Filters
We recommend that filters be checked or changed every 3 months.
Part No: 8-BF-1-1R
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock Pro™ Vinyl Dock Edging
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
Part No: 46098
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->Star Brite Instant Hull Cleaner
Formulated extra strong to get the job doneSimply spray or wipe on. Removes scum, algae and rust stains from fiberglass, metal and painted surfaces without rubbing. Extremely strong cleaner, avoid contact with galvanized metal. Removes scum, algae and rust stains. For use on fiberglass, metal and painted surfaces. Avoid contact with galvanized metal.
Part No: 081700N
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Repair and Service Kits, Spare Parts
Parts service and repair kits for Whale Water Systems Units.
Part No: AK3706
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Bi-Color and Sidelights
For powerboats and sailboats less than 20m or 65. 6'. Plastic frames with ultrasonically welded lenses and gasketed plastic bases. 2nm visibility. Per pair, except bi-color. Case Material: Plastic . Case Dimensions: 3-1/2"L x 2-1/4"W x 13/16"H . Mounting Hardware: #8 FHMS (sold separately) . Volts: 12V . Draw: 0. 7A .
Part No: 0254W00DP1
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Snap Hooks
Drop-forged from 316L stainless steel for outstanding strength.
Part No: 2482
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Snap Shackles->Fixed Bail Snap Shackles
All our snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by increasing its elasticity and maximizing the steel's internal strength. A forged snap shackle will deform long before breaking; it will not burst or break suddenly.
Part No: 2472
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->Shore Power One-Piece Adapters
Marinco straight adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of dissimilar power configuration. They are integral fittings with no wire between the end fittings. They are high-quality, but do not have sealing boots and are not recommended for use in wet applications.
Part No: 81A
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Bomar & Nibo Hatch Parts
With these spare parts for your Nibo or Gray hatch, you can replace worn or damaged parts for a fraction of the cost of replacing the hatch. Low-Profile Gasket in a 9' length. 9/16" Gasket in a 10' length. Available for the 100 series: Riser Arm Male Hatch Knob Female Hatch Knob. Hatch Tiedown Dog. Left-Locking Quick Dog.
Part No: NS2070--EX
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cleats & Chocks -> Mooring Cleats->Stainless-Steel Pop-Up "Neat Cleats"
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
Part No: 66515-7
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Sail Covers & Sheet Bag->Gear Organizers
Ronstan rope bags can be removed and stored inside the boat when not in use; all that remains in sight is the soft white plush side of the loop attachment panel—and no sharp hooks! RF3700 Series Acrylic Canvas Bags Acrylic rope bags have a classic navy style. They are lightweight, water resistant and will retain shape. Made of white, water-repellent PVC with black water-draining polyurethane mesh, these rope bags are extremely durable. Technical features include carbon tubes for easy opening.
Part No: RF3821
|
|
|
|
Home -> Ventilation -> Dehumidifiers, Air Purifiers
Cast off moisture, mold and mildew A built-in fan circulates dry, warm air within your boat to prevent mold and mildew. Designed for safe, continuous dockside operation, the spark-free Turbo Dryer draws less current than a 100W light bulb so it’s inexpensive to operate all year ‘round. Housing is anodized aluminum for corrosion resistance. 10"dia. x 4 1/2"H. 110V AC.
Part No: 9406WM-ABX
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Cotter & Clevis Pins
Assorted sizes of stainless-steel clevis and cotter pins. Small Boat kit contains 46 pieces ranging from 3/16"–5/16".
Part No: 37-504
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail->Flexible Trim
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
Part No: V30-1316B25-1
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->33C Red Jacket™ Control Cables
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
Part No: CC33218
|
|
|
|
Home -> Sailboat -> Blocks -> Snatch Blocks->Dinghy Snatch Blocks
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.
Part No: HA1375/1
|
|
|
|
Home -> Sailboat -> Blocks->Series 55 Ratchet Orbit Blocks™
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. It can be set at a 0 or 90 degree orientation, provides stress-free articulation without allowing the block to over-rotate, and is locked in place with a security clip that doesn’t require tools to fit. The Dyneema link is also more compatible with carbon, Dyneema and webbing connection points than steel loop tops or shackles.
Part No: RF56151A
|
|
|
|
An economical solution for high amperage loads where dependability is required in marine environments. Waterproof and ignition-protected (conforming to SAE J1171) so these circuit breakers are safe for installation aboard gasoline-powered boats. Ideal for branch circuits, windlasses, inverters and watermakers. False-trip free—designed to trip when subjected to a fault current. Available in panel and surface mounts. Interrupt Rating: 3000A at 12V DC. Voltage Compatibility: 42V DC.
Part No: 7000
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Snap Shackles->Forged Snap Shackles
Highest quality drop-forged 17-4 PH stainless-steel shackles are beautifully polished, with smooth contours. Great strength and reliability.
Part No: 2473
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Tillers Extensions & Ac
Lamp Pod, 10-33v LED Available factory fitted to pod or as optional accessory. 10-33 volt DC power required .
Part No: 89400206
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters
Keep your Genset AIRSEP system running in peak condition with this washable replacement air filter element. Rated for 250 hours between filter cleanings. Washable replacement air filter.
Part No: CD171A
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils->Trim Tab Accessories
Installation and replacement parts for Bennett Trim Tabs.
Part No: VP1135R
|
|
|
|
Home -> Safety -> Flares & Signaling Devices
Flares, flag and whistle in one handy, watertight kitA good choice for inland boating this kit contains four handheld red signal flares, a distress flag and a safety whistle, stored in an international orange, watertight, floating case that lays flat and stores easily.
Part No: 534
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Horns
Designed for easy installation, this hidden horn mounts from the outside. Compact in size, but capable of 107db loudness. Comes with both black and white snap-on ASA plastic grilles. A weatherproof fabric liner lets sound through, but keeps water out. Prewired for 12V installation. Material: ABS plastic . Loudness dB: 107dB . Design Standards: Meets ABYC specs for boats up to 12 meters . Dimensions: 2"H x 3-3/8"W x 3-1/4"D . Power Requirements: 12 Volts .
Part No: 10079
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Anchor Chocks & Accessories
Safe off-the-deck stowage for Danforth-style anchors to 22lb. This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel.
Part No: AH-100
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Docks And Accessories->Bird Spiders
Stainless steel “arms” of the Bird Spider move with the breeze, deterring birds from landing and causing damage to your boat, rooftop, lights, signs and more. It’s easy to install and maintain and will not harm people or birds.
Part No: MMBS800/BT
|
|
|
|
Home -> Plumbing -> Fittings & Valves
This combination water regulator, entry screen and check valve with Shurflo’s exclusive diaphragm design provides continuous protection from pressure surges. Pressure will not exceed 50psi. For installation on bulkheads of any thickness. Made of chromed plastic. 4-3/4" x 4-3/4" x 3-3/4".
Part No: 183-029-04
|
|
|
