Top Sellers
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
Ultra Blue Three-Strand Line, 1/4" Dia., 1,700lb. Breaking Strength from SAMSON ROPE
Ultra-strong line outlasts polypro two to one Made from bi-polymer olefin fiber, ultra-strong Ultra Blue is 30%–35% stronger than polypropylene and has more than twice the wear life. UV light resistance is excellent, it is easy to grip and it floats.
|
3/16" AmSteel-Blue Rope, Red from SAMSON ROPE
AmSteel-Blue is a 12-strand braided rope utilizing Parallay design with our proprietary blue Samthane coating with Dyneema® SK-75 fiber. This rope yields the maximum in strength-to-weight ratio and is stronger than wire rope constructions—yet it floats. Superior flex, fatigue and wear resistance. Stronger than AmSteel. Much stronger than steel. Very low stretch. Easily spliced. Superior flex.
|
Teleflex-Bezel For 2' Gauges from TELEFLEX
New! Aircraft Style Square Bezels No cutting or drilling necessary. Fits Amega Pro Series, between gauge and dash.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
A popular choice for gas and diesel inboard engines, White Premier instruments feature white dials with modern black and blue graphics and superior light pipe illumination. When illuminated, black dial grads and pointer become red. Fog-resistant design for enhanced readability.
|
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
|
Bottom Support Pole Caps, Non-skid from DR. SHRINK
Bottom Support Pole Caps Dr. Shrink carries a full line of premium installation supplies to ensure a professional shrinkwrap job from start to finish.
|
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
|
LED, 12V 30W from DR. LED
Medium screw-base (Edison E26/E27) LED bulbs offer an energy-saving solution to incandescent lighting. Soothing warm white light. Offer low power draw and ultra-long service life: 50,000 hours. Impact and shock resistant. 8-18V DC. . U. S. made high flux LED. *Click here for the Dr.
|
AC 36-Position Circuit Breaker Panel, 27 Circuit Breakers, 14-3/4" x 11-1/4" from BLUE SEA SYSTEMS
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
|
Repl. Cylinder - Repl. Hynautic Model K2 from TELEFLEX
Hydraulic Cylinders -- the same quality steering components that comprise the many Hynautic systems may also be ordered independently for both new or retrofit applications.
|
SeaStar 1.7 Front Mount Helm from TELEFLEX
Replacement front mount hydraulic helms for your steering system. Each helm has a 4-7/16" footprint, 3/4" tapered shaft and nut. To verify which helm you have, simply look at the end of your steering shaft for a 1. 7, 2. 0 or 2. 4 stamping. This is the helm only, but we recommend during installation that you thoroughly inspect hoses and connections for signs of excessive wear.
|
Water Temperature Gauge, IB, SD from TELEFLEX
Light grey dial, black graduations and numerals, white pointer staff. Scratch-resistant curved glass lenses with black, near flush bezels. U. S. and metric scales with ISO symbols where appropriate.
|
|
|
|
0–100psi from TELEFLEX, Blue from DR, 000SWL from SCHAEFER
|
|
OIL PRESSURE, 0-100 PSI, AMEGA.
Part No: 57929P
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Tsunami Bilge Pumps
Versatile Tsunami pumps feature interchangeable, twist-and-lock cartridges that reduce maintenance time. All wires are caulked and tinned to prevent water wicking. Rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents and the compact, low-profile design eases installation in tight spaces.
Part No: 4608-7
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Cooling Systems->Exhaust Flapper Valves
Heavy duty rubber flapper valve keeps following seas from entering exhaust outlet when moving slowly or stopping.
Part No: 18-4457D
|
|
|
|
Home -> Paint & Maintenance -> Winterizing & Storage -> Winter Covers->Heat Shrinkwrap Tape
Heat Shrinkwrap Tape Heat Shrink Tapes are designed for repairing holes in the shrinkwrap, for taping pleats and also for attaching zipper access doors. Heat shrink tape is not designed to be stuck to the hull or other parts of the boats as it will leave an adhesive residue.
Part No: WM-704B
|
|
|
|
OIL PRESSURE, 0-80 PSI AMEGA 2.
Part No: 57903P
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->600A Control Cables
Fits all Mercury and MerCruiser (1965–present) and Mariner 40hp and over (1993–present) engines. Engine and controls must both be Mercury or MerCruiser to work with these cables. Check engine or throttle ends for stamped length or measure tip-to-tip.
Part No: CC17918
|
|
|
|
Home -> Sailboat -> Winches -> Winch Repair Parts
Contains 10 pawls and 10 springs.
Part No: BK4512
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Above Deck Fuel Tanks Replacement Fuel Caps
Externally threaded cap fits Moeller tanks 031103, 031106, 031109, 031112, 031212. Scepter cap fits 4158, 4921, 3780 & 3781 tanks. Internal threaded cap fits 31612, 31615, 31515, 31818, 31620 & 31526 tanks.
Part No: 395008
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Spare Parts for Raritan Heads
.
Part No: G13W
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps->Transom Mounting Extension Shim
Extends ladder farther off the transom. Use with spacer and face plate included with ladder.
Part No: 99181:01
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps
For storing ladder on side coaming or transom. Identical to brackets included with each ladder.
Part No: 99193:01
|
|
|
|
Environmentally safe air horn uses air as a propellant, instead of the traditional gas-filled designs. It's economical too. no more expensive refills to buy. Recharges in seconds with a gas station air pump, air compressor, or any other mechanical compressed air source including hand pumps. Works in all weather extremes and can safely be used or stored near sources of heat. Provides approximately 20 blasts per charge. This loud horn puts out a powerful 120db. Meets all USCG regulations.
Part No: 616
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Wilcox-Crittendon Service and Repair Kits
We stock an extensive selection of parts and service kits for virtually all products. In addition, we can quickly get any part you need to repair your Wilcox-Crittenden, Jabsco, Shurflo, Raritan or Groco equipment directly from the manufacturer through our Special Order department. If you know the part number you need simply order the part using the Model or manufacturer's part number. Visit www. wilcoxcrittenden. com/replacement_parts.
Part No: PO195-96
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
Create a non-stick wax finish for your boatAfter you apply this wax with a soft deck brush, dirt, soot, bird droppings and even fish blood rinse off easily. One application lasts up to two months and protects against corrosion, oxidation, water spots and the effects of the sun. 16oz. provides four applications for a 25' center console boat. Requires no rubbing or buffing. 16oz. 16oz.
Part No: WW16
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cleats & Chocks -> Chain And Rode Pipes
Accepts up to 3/4" line. Material: Chrome-plated brass . Flange: 4"Dia. I. D. : 1. 75"Dia. .
Part No: C3808-0001
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Cam-Matic Cleat Kits with Fairleads
Micro Cam-Matic cleats are legendary for smooth, positive operation when holding and releasing control lines. Mounted aft of the cam, fairleads allow you to engage and release a line up to 45° on either side of the cam. Mounted ahead of the cam, fairleads allow moving lines, such as small catamaran traveler controls, to lead properly. Cam kits include: Cam-Matic® cam cleat: Pawls open/close easily on ball bearings . Large diameter low-friction guides with stainless steel tubes protect lines .
Part No: 358
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Heavy Duty Grab Handles
6" x 3 3/8" with base diameters of 2 5/8".
Part No: F61-9000BR-1W
|
|
|
|
Because they produce only a small amount of heat, these highflux bulbs make ideal replacements for most “third degree burn” halogen reading, map and cockpit lights with bi-pin and bayonetstyle bases. Light is soothing and warm with cutting edge internal circuitry and high-quality U. Power consumption is just 1W (less than 0. 08A!) except for three-watt Model 9980111. For forward pointing reading fixtures only. Application: Works with most MR11 fixtures . Amps: 0. 08A (Model 9980111 draws 0.
Part No: 8001238
|
|
|
|
Home -> Sailboat -> Rigging Products->Fiberglass Tapered Battens
Made for West Marine, tapered battens for every sail These battens are used by many well-known sail lofts. They are tapered for better sail shape and have protective vinyl tips. Label indicates which end to insert first.
Part No: TAP39X2
|
|
|
|
Home -> Plumbing -> General Purpose Pumps -> General Purp Pump Parts->Repair and Service Kits, Spare Parts
Parts service and repair kits for Whale Water Systems Units.
Part No: AK0553
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Stainless Steel Bar Handles
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
Part No: F16-5526-1W
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Submersible Electric Bilge Pumps
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.
Part No: 25D
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Ports
This window track is ideal for window glass or for installing sliding cabinet doors. Each channel groove is slightly (. 005") narrower than 1/4" window glass so there is positive pressure against the glass at all times. It seals out leaks and prevents glass from rattling. Made of B-FLEX marine plastic, it will not crack or discolor. The elevated slide at the bottom of the channel makes windows or doors easy to open and close. Sold in 8' lengths.
Part No: CH-1-08
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories
Heavy-duty stainless steel, combined with a positive-locking butterfly nut, provide a rust and corrosion-resistant hatch adjuster that delivers exceptional strength and holding power. Closed: 12"; extended: 21".
Part No: 7084SS
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Mushroom Heads, Barbed
253 Series Hose tailpipe/Mushroom Head.
Part No: 906032
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Solenoids
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
Part No: 18-5834
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> D & Headboard Shackles->Stamped Halyard Shackles
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
Part No: 93-42
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->Krazy Clean All-Purpose Cleaner
Nontoxic, nonflammable formula Biodegradable.
Part No: MDR-655
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
Cleans non-skid surfacesDesigned to clean hard-to-reach ground-in dirt and stains on non-skid surfaces. Safe for use on fiberglass, metal and painted surfaces. One Liter (34oz. ) One liter (34oz.
Part No: 09063
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Lock
Construction keeps out debris and protects your valuables against scratching.
Part No: 06112
|
|
|