Top Sellers
Storage Locker with Hinged Door from SAIL SYSTEMS
Increase your available storage area and save space at the same time. This recessed storage locker uses a continuous stainless steel hinge on the access door for long-lasting strength. Made of weather-able, acrylic capped ABS plastic for superior gloss, color retention and UV protection. Measures 11 3/4"H x 19 3/4"W x 7 1/4"D.
|
33C Red Jacket Cable, 18' from TELEFLEX
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
|
Fiberglass Boat Repair and Maintenance - Book from WEST SYSTEM
WEST SYSTEM® Technical Books—Guide you through a wide range of projects and repairs These books are chock-full of important of information on recommended product usage, applications, and step-by-step instructions for a wide variety of projects, including blister repair, deck reinforcement, lamination repair, closing of punctures and holes, dry rot repairs and more. Specific step-by-step instructions. Helpful illustrations.
|
18' Control Cable from TELEFLEX
Fits all Mercury and MerCruiser (1965–present) and Mariner 40hp and over (1993–present) engines. Engine and controls must both be Mercury or MerCruiser to work with these cables. Check engine or throttle ends for stamped length or measure tip-to-tip.
|
|
|
|
|
423 Graphite Powder - 6 OZ from WEST SYSTEM
423 Graphite Powder is a fine black powder that can be mixed with WEST SYSTEM epoxy to produce a low-friction exterior coating with increased scuff resistance and durability. Epoxy/graphite is commonly used as a bearing surface, and as a coating on rudders and centerboards, or on the bottoms of racing craft that are dry sailed. The epoxy/graphite mixture can also be used in teak deck construction to simulate the look of traditional seams and to protect the epoxy from sunlight. 7 oz.
|
Snap-On Cable Cover, 1/4" Wire Dia. from DAVIS INSTRUMENTS
White vinyl cable covers in 6' lengths. Tubes split down length and install in seconds.
|
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
|
Dacron Sail Repair Tape, 3" x 15' from BAINBRIDGE
Make emergency sail repairs with tough, sticky Dacron tape For temporary, emergency sail repairs. Much tougher, stronger, and stickier than spinnaker repair tape.
|
Dacron Sail Repair Tape, 3" x 150' from BAINBRIDGE
Make emergency sail repairs with tough, sticky Dacron tape For temporary, emergency sail repairs. Much tougher, stronger, and stickier than spinnaker repair tape.
|
|
|
Antifreeze, -100 Engine & Water System - Gallon from SEAFIT
West Marine Pure Oceans -100° (-73°C) Marine Antifreeze provides the ultimate in extreme cold weather and corrosion protection for drinking water systems and all engines. Its premium additive package prevents corrosion of aluminum, copper, brass and solder, but will not harm rubber, seals or hose materials. Provides burst protection to -100°F (-73°C) and freeze protection within a range of -58°F to -63°F (-50°C to - 52°C).
|
Sail Tie, Ball End 16IN, Blue from STARBRITE
Securing your mainsail to the boom is simpler and quicker when you use sail lashes instead of conventional ties. Dual lengths of durable, UV-resistant polyester plastic cord have polyethylene ball ends with brass stops and damping rings. Color-coded balls.
|
Fuel System Treatment & Stabilizer from MERCURY MARINE
Fuel System Treatment & Stabilizer Prevents fresh fuel from degradation and oxidation. 1oz. treats six gallons of fuel. For two-and four-cycle engines. 16oz. plastic bottle.
|
|
Cable from XANTREX, 72-84IN from AFI, Fiddle from SAIL SYSTEMS
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
Great for boats with small transoms. Includes a unique bracket for attaching to most angled or curved transoms in an area only 12"W x 6. 5"H. Both steps fold down for boarding.
Part No: 18017:01
|
|
|
|
Home -> Engine Systems -> Engine Parts->AIRSEP® Diesel Air Filters and Accessories
These genuine replacement air filter elements are designed and manufactured to meet Walker's strict standards for high performance air flow, multi-ply construction, and product quality. Air filters are available in popular sizes to equip your Caterpillar®, Detroit Diesel®, or Cummins® marine engines. Please measure your filter carefully before ordering (shape and filter size should not be changed from original equipment as springs and tops will not fit properly).
Part No: CD196
|
|
|
|
Designed for use with SW and PS inverter/chargers, the SWRC is a full-function remote control with backlit LCD display. The remote control comes with a standard 25’ (7. 5 m) cable or a 50’ optional (15 m) cable.
Part No: SWRC/50FT
|
|
|
|
Home -> Plumbing -> General Purpose Pumps -> General Purp Pump Parts->Service Kits
Contain replacement parts for common pumps listed in chart below.
Part No: 90118-0001
|
|
|
|
For built-in or under-cabinet installation, the “hold-in-place” design of this coffee maker ensures that both carafe and reservoir remain securely in place in when seas get rough. Features include a 10-cup, press-to-pour, double-insulated, stainless-steel carafe that keeps coffee hot for up to four hours, clear reservoir and 24-hour clock/timer. Cord length is 42". Draws 8. 34A @ 120V AC.
Part No: CCM1000
|
|
|
|
Home -> Engine Systems -> Control Systems -> Engine Controls->Hot Foot Throttle
Replaces your hand throttle with a foot pedal that makes you feel like you're behind the wheel of your automobile. When released, the Hot Foot automatically returns your engine to the idle position thanks to a strong stainless spring. Mounts directly to the deck of the boat and uses standard control cables. Aluminum pedal. Stainless hardware. Non-stick bearing surfaces.
Part No: HF-1-DP
|
|
|
|
Home -> Cabinet & Deck Hardware -> Deck Plates & Storage -> Fixed Storage
Strong, UV-resistant ABS. Flanges are pre-drilled for #8 FHMS. Cut-out template included.
Part No: 49400000
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Automatic Pressure Water Pumps
Quiet and pulsation-free, even at low speeds, our pumps are designed to provide perfect water pressure for single and multiple outlet installations. Compared to older three or four chamber designs, the five chamber design, coupled with cushioned mounting feet, results in lower motor speeds, whisper-quiet operation and dramatically reduced pulsation. GPM: 2. 4Draw @ 12V DC: 7. 0 . Switch Type: Sealed 41 psi pressure switch . Material: Base: Powder-coated steel; Pump body: Powder-coated steel .
Part No: 10-24604-103W
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories->Hatch Riser Arms
Replacement arms for Taylor hatches from 1987 to the present. Universal arms can be left or right.
Part No: 1722
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars
Separates the up/down and side-to-side motions of the pole to make a bind-free, strong attachment. Shackles are supplied for uphaul/downhaul lines. Stainless steel cheeks, aluminum body and plastic liners. Ring Style Car RC-125 Although a screw-pin stop is supplied, this car is designed to be used with uphaul/downhaul blocks shackled to the bails at each end. Ring ID: 1 5/8". Investment cast stainless steel with plastic liners to reduce friction. Fits UXP and UTR pole end fittings.
Part No: 331000
|
|
|
|
Home -> Sailboat -> Rigging Products->Stanchion Base & Brace
Heavy-duty 1" stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16" oval dia. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16" welded rod reinforcement doubles as a bail for snatch blocks, etc. The gate brace mounts midway up the stanchion and has a welded base canted 60° for extra support at gate openings.
Part No: 36-09
|
|
|
|
Home -> Engine Systems -> Steering Systems
A replacement hydraulic seal kit for Seastar outboard front-mount hydraulic steering cylinders.
Part No: HS5157
|
|
|
|
Plug this coffee maker into any 12-volt outlet and enjoy great-tasting coffee wherever you go. Outstanding features include a 12-cup, double-walled, brushed stainless steel carafe that keeps coffee hot for hours; and a convenient “Brew Pause” feature that lets you pour a cup of coffee mid-cycle, without drips or spills. Includes auto-shut off, easy-fill, reservoir with magnified level indicator and a convenient brew-through, pour-through, hands-free lid that seals air out and keeps flavor in.
Part No: COF-10BK12
|
|
|
|
Home -> Safety -> Flares & Signaling Devices -> Lights, Strobes & Distress
Signal for help, warn oncoming boats of your presence or locate your gear at night Signal other boats and aircraft in search and rescue emergencies, locate an overboard crewmember in the dark or find mooring balls and fishing gear. Features a long-life red laser diode that lasts up to 10,000 hours. Runs 40 hours on an easily replaceable 3-volt lithium CR123 battery. Easy to carry on a keychain or in a pocket. Non-flammable, environmentally safe. Rugged, machined aluminum with knurled design.
Part No: RLL012-01
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Twist’n’Lock Compact Manual Head Service Kits & Parts
Twist’n’Lock Compact Manual Head Service Kits & Parts Technical Data Sheet.
Part No: 29040-3000
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes
Install your own windshield washer systemFits new or existing AFI Deluxe wiper arm and blade sets, with all the parts to outfit two wiper arms. The kit includes a 3 liter water tank with mounting bracket (8. 5"H x 7"W x 4. 5"D), 12V pump motor and 16' below deck clear tubing, 6' above deck black tubing, clips and sprayer fittings. You supply wiring, an in-line 3A fuse and On-Off momentary switch.
Part No: 33505
|
|
|
|
Designed to prevent the discharge of fuel overboard from the vent line while re-fueling or underway. The patented unit installs easily in the vent line. For diesel and gasoline boats. Use one Lifeguard for each vent line. Fits standard 5/8" hose. Can be installed up to 45° off vertical.
Part No: LG100
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Splash Zone Epoxy
Excellent for underwater application788 Splash Zone Epoxy Formulation: Two-part epoxy patching compound . Recommended Usage: Patching and repairing wet, damaged surfaces . Drying: One-hour working time. Four-hour set time.
Part No: A788-QT
|
|
|
|
Home -> Plumbing -> Freshwater Systems
Easy back-and-forth action produces one-way discharge. Spout swivels. Made of nylon, aluminum and synthetic rubber. For 1/2"ID hose. Material: Nylon, aluminum, rubber . Capacity: 2gpm . Dimensions: 7-1/8"H x 6"dia. . Cutout Size: 2". Clearance: 4-1/2" .
Part No: GP0418
|
|
|
|
Home -> Plumbing -> General Purpose Pumps -> General Purpose Pumps->Flo-Master Centrifugal Pump
Groco Flo-Master Centrifugal Pump Top-of-the-line pump for baitwell circulation, hot/cold water circulation, diesel transfer, shower pumpout or low-pressure washdown. Ignition-protected motor has a #316 stainless steel shaft for extra long life. Not self-priming, so a flooded inlet is required . Not submersible . 17 GPM at 0' . Ports: 3/4" NPT inlet; garden hose or 1/2" NPT outlet . Draw: 5. 5A at 12V DC .
Part No: P-2
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.->TFXtreme 4300 BC Performance Cables
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
Part No: CC69220
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Catches & Latches
Chrome plated zinc alloy with sliding lock button. For door thickness 3/4 to 1-1/8 inches. Supplied with black plastic spacer for surface mounting. Bevel/Strike Type: Regular w/Box. Case Dimensions: 2-1/8 x 1-3/4 .
Part No: 1279DP0CHR
|
|
|
|
Home -> Engine Systems -> Engine Parts
Exhaust Elbow Lower Swivel - 3" Outlet Replaces Crusader #97387 .
Part No: 7387
|
|
|
|
Home -> Engine Systems -> Engine Parts
Installs on outlet line and shows when to change filters by indicating an increase in suction. Complete kit includes gauge as well as male and female fittings for installation.
Part No: 1606B
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Swim Platforms/Steps->Swim Platform Brackets
A simple way to mount your swim platform. 304 stainless steel brackets, 1. 5"W flat bar stock for the underside of the platform and transom.
Part No: 60995
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
Part No: 0930DP0CHR
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
Contoured to hug the hull of inflatable boats. Attaches to floorboard or side with 3/8'' line and heavy-duty swivel snap. 1'' dia. anodized aluminum tubing with plastic rungs. Vinyl sleeves protect hull fabric.
Part No: 13002:01
|
|
|
|
Home -> Engine Systems -> Engine Lubrication->DELO 100 Diesel Engine Oil
Recommended for use in older 2 and 4 stroke marine diesel engines, Chevron DELO 100 motor oils utilize the latest technology to provide excellent performance in older engines using either normal, high, or low sulfur fuels. The SAE 30 and 40 grades are specifically designed for 2-stroke diesel engines requiring highly effective control of wear and deposits. DELO 100 oils comply with Detroit Diesel Corporation 2-stroke engine requirements, including the 0.
Part No: 222403448
|
|
|
|
Home -> Cordage -> Rigging Products
Find this knife in the dark! Half-serrated stainless steel blade cuts heavy materials and composite ropes without dulling. Glow-in-the-dark handle makes it easy to locate. Features a 2-7/8"L locking blade, shackle key, and marlin spike. 7-1/8"L open.
Part No: 10062
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Git Rot Penetrating Epoxy
Easy-to-use epoxy rescues dry-rotted wood from oblivionSoaks into wood fibers and restores strength to rotten sections. By drilling small holes into fiberglass laminations, underlying wood can be saturated and much of its original strength can be restored. Can be sanded, painted, drilled, tapped and is compatible with most sealants and paints. Recommended Usage: Inject into dry-rotted wood, wood deck or hull cores. Coverage: Volume required for saturation—about half the volume of rotted wood.
Part No: 1065
|
|
|
