Top Sellers
3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .
|
Fastpin, 3/8 D X 1.5 SS from SCHAEFER
Stainless steel detent pin with ring is designed for shear applications. Spring-loaded balls staked in, exert enough pressure to prevent accidental release. Quick-one handed insertion or release Grip length is distance from locking ball to ring Sold individually Made in U. S. A.
|
Flip Lock Drain Plug 1" Stainless from SEAFIT DRAIN
Standard rubber and brass plug fits 1" transom drains on many production boats.
|
Gas Deck Fill, Locking from PERKO
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.
|
|
|
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
Halyard Kit, 1/8" Wire Dia., 3/8" Line Dia., 40' Wire Length, 40' Line Length from WEST MARINE RIGGING
Convenient, do-it-yourself kits offer an economical way to replace old halyards We offer these kits for those who want to replace their old halyards or install new low-stretch halyards. Made of the highest quality 7x19 oil-free stainless wire and New England Ropes premium white Sta-Set yacht braid. Comes with a Flemish eye at the rope end, and a thimble and sleeve, but no shackle. Rope Type: Sta-Set Yacht Braid . Shackle: Flemish eye splice, sleeve and thimble, no shackle .
|
Brass-Bristle Brush from SEAFIT
Solid brass bristles won't rust or corrodeLarge, plastic utility brush has solid brass bristles that won’t rust or corrode. Brass bristles are slightly softer than stainless steel and are therefore less intrusive to surfaces. Molded plastic handle provides solid, controlled grip. Bristles: 5/8"D. Overall length: 8 1/2". Molded plastic handle provides solid, controlled grip. 5/8"L bristles.
|
WM Self-Coiling Hose - 15' from WEST MARINE
Featuring an improved flow rate and field-serviceable couplings! With an improved flow rate of 360gph, this hose delivers a powerful stream of water to make deck and boat wash-downs quick and easy. In the unlikely event of a rupture, the couplings can be removed with common hand tools, the hose shortened and the couplings replaced, which is a big advantage if you happen to be offshore! 90% usable length. Field-serviceable couplings. Strain relief at hose connection end'. 360gph flow rate.
|
P-Trap Fuel Surge Protector from ATTWOOD
One combined product eliminates the need to install both a fuel line vent and a surge protector. Inertia of surging fuel drives the surge ball against upper seat, closing the large vent opening and limiting passage to smaller openings, which reduces fuel flow and minimizes spillage. Operates in any orientation within 45° of vertical. Baffles resist water intrusion during normal sea conditions and washdown. Constructed of glass filled polypropylene to withstand oil, gas, alcohol blended fuels.
|
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
CP Zinc Sliding Window Stop from PERKO
Chrome-plated zinc with plastic cover on stopping plate. . Base measures 3/4"W x 1 7/8"L. . Requires #8 fasteners (not included). . Stopping plate length: 1 1/2'' . Made in U. S. A.
|
Flush Lock - Black/Stainless Steel with Adjustable Offset Cam Bar from PERKO
Black plastic with stainless steel "D" ring handle and with adjustable offset cam bar. Two O-rings for increased water resistance. Position indicator shows open or closed position. Door thickness: 3/8" to 1-14" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 3/8" to 3" .
|
|
8"ID from SHIELDS RUBBER, Length from SHIELDS RUBBER, Locking from PERKO, 1
|
|
Home -> Engine Systems -> Engine Parts->Marine Rubber Exhaust Elbows
Exhaust hose elbows let your wet-exhaust line make tight turns without kinking. They provide excellent tolerance to engine heat, vibration and back pressure. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end). Not intended for hose-to-hose connections. Lubricate with water or detergent. 250°F max.
Part No: 116-245-5000KIT
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-0783
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-2383
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Marine Rubber Exhaust Elbows
Exhaust hose elbows let your wet-exhaust line make tight turns without kinking. They provide excellent tolerance to engine heat, vibration and back pressure. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end). Not intended for hose-to-hose connections. Lubricate with water or detergent. 250°F max.
Part No: 116-290-2000KIT
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 315 Silverado 2000 Outboard Fuel Hose
Premium-quality fuel hose designed for outboard feed and vent lines. Remains flexible at low temperatures and resists UV sunlight. Silverado 2000 complies with SAE J1527 Type B2 specifications. Should not be used in applications requiring the use of Type B1 fuel feed line.
Part No: 116-315-0386
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Series 365 Fire-Acol Low-Permeation Fuel Hose
Special design NBR tube with an embedded plastic barrier layer limits permeation. The design of this hose provides easy coupling insertion and the NBR/PVC cover is weather and UV resistant. The hose is also polyester reinforced and fire-resistant. Fuel Type: Fuel feed (gasoline up to 85% ethanol blended fuels/diesel/bio-diesel all blends) . Approvals: SAE J1527 Type A1-15 and ISO 7840 Type A1 . Construction: Reinforced with high strength synthetics to resist gasoline/alcohol permeation .
Part No: 116-365-0120
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives->Life Seal Sealant
Better adhesion than silicone—and can be removed without damage to gel-coats Polyurethane and silicone formulated for use on fiberglass. It gives measurably better adhesion than silicone and yet, unlike most polyurethanes, can be removed without damage to gel coats. Fast-curing, low-odor, high-adhesion, non-corrosive and non-sagging. Recommended Usage: Fiberglass, vinyl, ABS, Lexan, metal, glass, wood; above or below water . Cure Time: Tack-free: 20 min. ; Complete cure: 24–36 hrs.
Part No: 1161
|
|
|
|
Home -> Engine Systems -> Engine Lubrication
"We don’t know anyone who looks forward to changing engine oil, but this pump should make the job a little easier. The handle makes it easy to carry the goo to a harbor recycling location or your local gas station that accepts used oil. Your engine will appreciate it!" Improved durability and capable of inflating high-pressure This value-priced oil changer makes changing oil a snap! Simply place the transfer probe down the dipstick tube and start pumping.
Part No: 1175
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Sanitation Hose Fittings
Fiberglass-reinforced nylon fittings designed to fit Shields Series 101, 148 and 144 hoses without heating or special tools. Use in sanitation systems, deck drain systems and water tank fill.
Part No: 118-806-1120
|
|
![Gasket 1189-0000 from JABSCO]( "Gasket 1189-0000 from JABSCO")
|
|
Home -> Engine Systems -> Engine Lubrication -> Oil Change Pumps->Pump Gasket Kits
Jabsco gaskets & gasket kits.
Part No: 1189-0000
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring
Durable polypropylene rope through a solid foam float has ample bright at one end for boathook pickup. Galvanized thimble at opposite end accomodates pennant from mooring buoy. Red band makes it more visible Made in U. S. A.
Part No: 1203
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Spin-On Series Diesel Fuel Filters/Water Separators
Racor’s Aquabloc filter media removes virtually 100% of water and solid contaminants. Filters have die-cast aluminum heads and come in different sizes for diesel engines and any rate of fuel flow. To be used on the suction side of the pump. See-thru bowls allow visual inspection for water; metal bowls are recommended for use in areas of high heat and are required by the US Coast Guard on inboard engines and gensets. Inlets/Outlets: 1/4" NPT female . Bowl Material: See-thru polymer .
Part No: 120RMAM2
|
|
|
|
Home -> Paint & Maintenance -> Tools
Soft tool bag resists weather, won't skid More practical than a rigid tool box, this bag easily stores in the odd-shaped nooks and crannies of boats. The tough tarpaulin construction is enhanced by a polyester bottom with rubber strips to keep it from siding across your deck! Features: Large internal compartment with 12 tool loops . External compartment with weather-resistant zipper. Includes: Carpet-bag-style handles . Dimensions: 14"L x 12 1/2"W x 11"H.
Part No: 1258
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704090
|
|
|
|
Home -> Safety -> Life Jackets -> Recreational Life Jackets->Coastal Comfort Inflatable Life Vests
Enjoy unrestricted movement on the water! Designed for inshore or coastal boating, our new Comfort Series™ Inflatable Vests have a more streamlined and lightweight fit. These compact vests feature a thin profile that won't inhibit your movement and they offer 22. Each vest has 1" chest webbing, a high-tenacity nylon covering and Delrin buckle. All vests have heat-welded yellow chambers that provide 22. Include D-ring, back-up oral inflation tube, one arming cylinder and pin.
Part No: 1271C/Y-00-WMP
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Chrome plated zinc alloy with sliding lock button. For door thickness 3/4 to 1-1/8 inches. Supplied with black plastic spacer for surface mounting. Bevel/Strike Type: Regular w/Box. Case Dimensions: 2-1/8 x 1-3/4 .
Part No: 1279DP0CHR
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses -> Scrub Brush Kits, Accessories->Boating Accessories
Convert your Shurhold pole to a paddle or boathookUse thse accessories with Shurhold's "one-pole-does-it-all system. Boat Hook has line-carrying feature, centered push-off and basic boat hook. Paddle features Shur-Lok quick-release adapter and is a great safety item for any boat.
Part No: 130
|
|
|
|
Home -> Anchor & Docking -> Bulk Nylon & Poly Line->Ultra Blue Three-Strand Line
Ultra-strong line outlasts polypro two to one Made from bi-polymer olefin fiber, ultra-strong Ultra Blue is 30%–35% stronger than polypropylene and has more than twice the wear life. UV light resistance is excellent, it is easy to grip and it floats.
Part No: 130016806020
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps
Contoured to hug the hull of inflatable boats. Attaches to floorboard or side with 3/8'' line and heavy-duty swivel snap. 1'' dia. anodized aluminum tubing with plastic rungs. Vinyl sleeves protect hull fabric.
Part No: 13002:01
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Engine Repair Manuals
SELOC has been the leading source of how-to information for the marine industry since 1974. Designed and written to serve the needs of the professional mechanic, do-it-yourself boat enthusiast, instructor and student, these manuals are based on actual teardowns done by Seloc’s editors/authors in our on-site facility. 25-60 h. , 1 and 2 cylinders from 1971-1989. Every manual features: Easy-to-follow, step-by-step, illustrated procedures . Hundreds of exploded drawings, photographs and tables .
Part No: 1302
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Sinks, Faucets & Shower
>Adaptable to any 1/2" hose, this shut-off switch allows for easy on/off operation.
Part No: 131-0013-CP
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Gas Fill & Tank Vent
Perko Gas Fill and Tank Vent This ingenious plastic deck fill has a vent with a flame arrestor built right into the fill flange. A flip-up cap eliminates the need for a deck key and no ground wire is required.
Part No: 1319DPGBLK
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Gas Deck Fills
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.
Part No: 1324DP0BLK
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Boathooks
Use it to easily loop your dock lines around posts or pilings. Especially useful at low tide when the piling is too high to reach. Mounts to any boat pole.
Part No: 134
|
|
|
|
Home -> Plumbing -> Freshwater Systems
Complete with spray nozzle, polished-chrome deck holder and 6' heavy-duty white hose. ON/OFF trigger allows for intermittent water flow or continuous spray.
Part No: 135-0011-WH
|
|
|
|
Home -> Plumbing -> Freshwater Systems
This shower mixer has a water conservation button built-in to the handle. Chrome-plated with an easy grip handle, ceramic disc valves and 72" retractable hose. Includes flexible 1/2" NPT connection hoses for easy installation. Material: Brass . Dimensions: 6"H x 6-3/8"W x 7-1/4"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" . Cutout Size: 2-1/2". Manufacturer's Documents Installation Guidelines.
Part No: 135-0204-CW
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Exterior Vents
Black plastic base, attached hose flange. 3" duct. Type: Cowl . Material: Chrome-plated zamak, plastic . Dimensions: 2-1/4"H x 5-5/16"W x 6"L . Cutout Size: 3" .
Part No: 1364A3
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Sinks, Faucets & Shower
Ideal for mounting to any horizontal surface. Kit includes spray nozzle, hose and necessary hardware for easy installation. White. Material: ABS plastic . Dimensions: 3-7/8"H x 3"W x 2-7/8"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .
Part No: 137-0000-WH
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Female Pipe-to-Hose Adapters
Nylon Fittings, Female Pipe-to-Hose.
Part No: 139920
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Hose Elbows, Barbed
.
Part No: 139941
|
|
|
