Top Sellers
Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Easy to remove for trailering In winds as light as 2/10th knots the sapphire suspension bearing allows the Windex to seek wind direction. No other wind vane in the world is as sensitive to extreme light air and small puffs, or as responsive when the breeze picks up. For small boats and dinghies. Includes a 10" vane, adjustable tacking tabs and glass reinforced polycarbonate J-Base for side, top or front of mast mounting. Stands only 9. 25" tall and weighs 1.
|
Windex 15 Wind Indicator from DAVIS INSTRUMENTS
Improved with bird-proof spike Super-sensitive to slight changes in wind direction at the masthead, Windex Wind Indicators are popular around the world because they offer such an exceptional value. They feature sapphire jewel suspension bearings, large fin/low inertia vanes and easy-to-read, fully adjustable tacking-tab system for quick reference. The choice for most sailors, the Windex 15 features a 15" vane and reflectors for high visibility day and night.
|
Tab Assembly from DAVIS INSTRUMENTS
Use these replacement parts for all Windex Wind Indicators.
|
Tiller Tamer from DAVIS INSTRUMENTS
Smooth, adjustable control of tiller movement, for short periods of "self-steering. " Particularly useful when changing sails, motoring, etc. on short-handed boats.
|
No Spill Fuel Saver from DAVIS INSTRUMENTS
Attach the No Spill container to the hull with the powerful suction cups over the fuel tank vent when refueling. The fuel-resistant bottle will capture the runover fuel from the vent when the tank is full. Prevent stains on the hull and pollution to the environment.
|
Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.
|
The Original Doel-Fin Hydrofoil from DAVIS INSTRUMENTS
Get your boat on a plane quickly by increasing the lift generated by the engine. They also allow you to go more slowly while still remaining on a plane, so fuel consumption is decreased. The injection-molded tenite polypropylene fins install easily on the cavitation plate of most outboards from 5 hp and up . Includes Mounting hardware .
|
Queaz-Away Bands from DAVIS INSTRUMENTS
Comfortable, elastic, acupressure wrist bands exert a gentle pressure on wrist points helping many people avoid the discomfort of rough seas or bumpy travel. Safe and easy to use—just slip them on over your wrists and position them for enjoyable travel. Long-lasting fabric is comfortable and washable. Carry case included. One size fits all.
|
Clamp-On Rod Holder - 1 1/4"ID Horizontal, Gold from WEST MARINE
Silver or gold tubes are anodized for long life in the marine environment. Fabricated from cold drawn aluminum with no unsightly weld seams. Available in aluminum schedule pipe sizes 3/4" thru 1 1/4" in horizontal and vertical models. If using stainless steel tube, please go down 1/4" in size. Type:Clamp on. # of Rods:One. Material:Aluminum. Lining:White vinyl. Diameter:Rod holder is 1 5/8" ID. Mount:Clamp on.
|
1/4" Aluminum Hose Barb, 1/4" Make Thread from MOELLER
Barb-Fuel 1/4Npt x 1/4 M Thrd|Barb-Fuel 1/4Npt x 1/4 M Thrd.
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
|
4" from SEAFIT, 1, 1-1, 6oz from LEWMAR, from DAVIS INSTRUMENTS
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil
Easy to use and safe for the environmentNon-acid formula cleans and brightens teak without harming the environment. 64oz. Non-acid formula. Won't harm environment.
Part No: 2390-2LB
|
|
|
|
Home -> Engine Systems -> Engine Parts->Plug Boss
Don’t forget to install your trailerable boat’s drain plug and get that sinking feeling! Get the Plug Boss instead. Put the bright red anodized aluminum plug holder in the most logical place possible, on the trailer winch handle, and never forget to reinstall your drain plug when you launch your boat (or remove it when you haul out). Choose a Plug Boss to fit either the 1" rubber tee handle drain plug or a 1/2" pipe threaded bronze drain plug.
Part No: 2402
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Striping Tape->Premium Striping Tape
.
Part No: 2450090
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Universal Enamels Spray Paint
For application on diverse surfaces including fiberglass, wood, plastic, metal—even vinyl! These enamels are rust, fade, chip and chemical resistant and remain flexibile in extreme conditions. Ergonomic bottle with trigger actuation eliminates drips and finger fatigue. New misting system minimizes overspray and permits spraying from any angle—even upside down! Colors (except Flat Black) dry to a gloss finish. 12oz.
Part No: 245214
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Snap Shackles->Fixed Bail Snap Shackles
All our snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by increasing its elasticity and maximizing the steel's internal strength. A forged snap shackle will deform long before breaking; it will not burst or break suddenly.
Part No: 2470
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Snap Shackles->Fixed Bail Snap Shackles
All our snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by increasing its elasticity and maximizing the steel's internal strength. A forged snap shackle will deform long before breaking; it will not burst or break suddenly.
Part No: 2472
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Carabiners & Snaphooks->Stainless-Steel Snap Hooks
Drop-forged from 316L stainless steel for outstanding strength.
Part No: 2482
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Metal Plumbing Fittings->Raw Water Strainers
Assembly features durable nylon upper housing, clear polymide twist-off bowl and pop-out, 50-mesh stainless steel screen.
Part No: 253-321-01
|
|
|
|
Home -> Cordage -> Rigging Products->Snap-On Cable Covers
White vinyl cable covers in 6' lengths. Tubes split down length and install in seconds.
Part No: 255
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Submersible Electric Bilge Pumps
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.
Part No: 25D
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Transom Mount Bait Pumps
Transom mounted aerator pumps provide your livewell to have professional aeration without needing to install a pump through your hull. The unique quick-release pump with strainer base assembly snaps easily into the provided transom bracket. At the end of the day, the pump can be removed from storage. Each pump features 6' wire leads. No need to install a pump through the hull. Unique, quick-release pumps with strainer base assembly easily snap into the transom bracket (included).
Part No: 25DTB
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Automatic 12V Bilge Pumps
An internal computer chip cycles these pumps on every 2. 5 minutes, then quickly shuts them down if no water is detected. Built-in strainer bases snap off to make cleaning easy. Completely submersible, rust-proof, corrosion-proof and ignition-protected. Three-way wiring enables connection to a switch for manual override or indicator light. Small 500gph pump is designed to handle spray and rainwater. Built-In Switch: Yes, cycles every 2. 5 min.
Part No: 25S
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Flip Up Dock Cleats
These sleek, low-profile cleats fold down and out of the way when not in use. The smooth rounded surfaces are made of solid aluminum with a white polyester power coating. Predrilled for mounting with 3/8" carriage bolts (hardware sold seperately). .
Part No: 2606P-F
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Swim Platforms/Steps->Traction Step Plates
Place on step plate at each boarding point on deck to prevent slips and falls. Anodized aluminum extrusions have teak or white poly inserts.
Part No: 26325:01
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Paint Brushes, Rollers->Paint Sprayer
Here's an easy-to-use spraying systemEliminates the need to match color swatches on hard-to-find spray cans. Allows you to spray your own paint—and virtually any other liquid. Perfect for small jobs that a brush or roller can't handle. Holds 16oz. of paint. 16oz.
Part No: 267
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->Spray Nine All-Purpose Cleaner
All-purpose cleanerHeavy-duty all-purpose cleaner and degreaser is nontoxic, nonflammable and biodegradable. 25oz.
Part No: 26901
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Captive Ball (CB) Traveler Cars
These lightweight, solid aluminum and compact captive ball (CB) travelers are built to handle very high loads. Captive ball bearings let you roll the cars on and off the track without using a ball loader. Boat Size: Dinghies, multihulls, to small offshore boats. Material: One-piece solid aluminum . Shackle: Pivoting toggle models—fasten control blocks directly to post without needing a shackle. Sheave: Fixed sheave models—mainsheet loads 40° or less from vertical.
Part No: 2733
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Replacement Strainer Bases for Rule Bilge Pumps
Original replacement strainer base for your Rule Bilge Pump.
Part No: 279
|
|
|
|
Home -> Safety -> Safety Harnesses->ISAF Specification Safety Tethers
Is your safety tether still safe? This tether will tell you Meeting all ISAF (International Sailing Federation) requirements for strength, design and features for sailboat racing, these safety tethers incorporate a lightweight aluminum double-action safety hook and a built-in stress indicator for improved security offshore, whether racing or cruising. The stress indicator features a bright overload flag that is exposed when the tether is stressed to the point of needing replacement (about 900lb.
Part No: 283.SET.A
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot->VPC™ Line
VPC™ has a strong, lightweight core of Vectran and polyolefin surrounded by a durable UV-resistant polyester cover. VPC was designed specifically with the club racer in mind, and it fills the gap between traditional all-polyester rigging and more expensive grand prix racing lines. VPC is available in popular marine colors. Best use: Sheets & halyards on casual racers & offshore cruisers. Stretch: . 5% at 15% breaking strength. Low Elongation .
Part No: 2842-08-00600
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival -> PLBs & EPIRBs->GlobalFix™ iPRO Category I & Category II GPS-Enabled EPIRBs
The screen shows GPS LAT/LON, operating instructions, usage tips, transmission bursts as well as battery power. Self-testing your beacon is simple and easy to understand, with the iPRO digital display visually guiding you through the self test step by step. The GlobalFix™ iPRO is also the first EPIRB that offers Dual GPS Technology. Interface your iPRO to your onboard GPS to ensure that your LAT/LON is stored inside so your precise coordinates are transmitted in the first data burst.
Part No: 2848.0
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Bilge Pro Replacement Motor Cartridges
In the event of a problem, replacing your cartridge bilge pump motor is easy— provided you keep one of these on hand. Just pop out the old cartridge and pop in the new. Fit Johnson, West Marine Bilge Pro and Mayfair cartridge-style bilge and livewell pumps.
Part No: 28552
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Laminated Replacement Tillers
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
Part No: 2900
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Parts for Manual Heads
NOTE: Conversion to Twist’n’Lock operation requires installation of complete Pump Assembly (29040-3000) or Piston, Rod, O-Ring Assembly (29046-3000) and Valve Cover Assembly (29094-3000).
Part No: 29026-2000
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Twist’n’Lock Compact Manual Head Service Kits & Parts
Twist’n’Lock Compact Manual Head Service Kits & Parts Technical Data Sheet.
Part No: 29040-3000
|
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Head Parts->Service Kits & Parts for Manual Heads
NOTE: Conversion to Twist’n’Lock operation requires installation of complete Pump Assembly (29040-3000) or Piston, Rod, O-Ring Assembly (29046-3000) and Valve Cover Assembly (29094-3000).
Part No: 29042-0000
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Check Valves
For vertical or horizontal use in fuel or water systems to maintain pump prime or prevent backflow to fluid source. The unique design minimizes fluid turbulence and flow restriction.
Part No: 290608
|
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Twist’n’Lock Compact Manual Head Service Kits & Parts
Twist’n’Lock Compact Manual Head Service Kits & Parts Technical Data Sheet.
Part No: 29094-3000
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Rope Clutches->D2 Rope Clutches
Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Application: High load applications on boats to 55', low load and control lines on larger boats . Safe Working Load: 2650lb.
Part No: 29103414
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Locking Flush Latches
Highly-polished stainless steel or plastic . 2 3/8" outside diameter. 1/2" cutout, 3/4" thickness.
Part No: 29203
|
|
|
